Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
6th September 2017, 17:56 | #15081 | Link |
Registered User
Join Date: Sep 2009
Posts: 89
|
Hello. Not used ripbot in a while, quite a while in fact and have ran into a problem.
I have all the necessary additional tools installed, haali, avsynth, etc. When I load a file into ripbot, it takes ages to demux, even though I have 3 HDs. Once the file is finally demuxed, ripbot just sits there with the, "please wait, gathering information" message, and nothing happens at all. I have to abort the process. I am running: Ryzen 8 core 1700@3.70ghz, no overclocking. 16gig DDR4 3600mhz. Windows Pro 64bit. Regards.... |
6th September 2017, 19:09 | #15082 | Link |
Registered User
Join Date: Nov 2010
Location: Brazil
Posts: 92
|
The RipBot, by means of the PgcDemux, among other tools, already works very well with DVD files and practically excludes the incidence of delay.
But when we use a unique VOB file of unknown origin, then we often come across a delay. This way we can facilitate the encoding of RipBot. For this particular case I tested many tools, and this was the safest process. After that this VOB file will marry well with the RipBot. Procedures (Mux/Demux - no encoding and no compress): Image1 - Image2 Last edited by jandor; 7th September 2017 at 15:03. |
7th September 2017, 16:27 | #15083 | Link | |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
Quote:
|
|
7th September 2017, 20:54 | #15084 | Link | |
Registered User
Join Date: Sep 2017
Location: BCN
Posts: 4
|
Quote:
Hello. First of all thank you. I use ripbot264 for 8 years now. Now I pass the upper step using distributed encoding but i have exactly the same problem as the one indicated above. Do you have a solution for this problem? Thank you. PS : Using ripbot264 1.20 . The issue appears with non-English versions of Windows. Tested on 3 new Windows install. The shared folder problem is not on the English windows... Last edited by Asmeralde; 9th September 2017 at 10:35. Reason: Precision |
|
9th September 2017, 18:25 | #15085 | Link | |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
Quote:
Please run this script as Administrator and show we what you get. https://www.mediafire.com/file/b9sk9...hareFolder.cmd
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
|
9th September 2017, 19:51 | #15086 | Link | ||
Registered User
Join Date: Sep 2017
Location: BCN
Posts: 4
|
Ripbot Shared Pb
Quote:
Quote:
It works using this command C:\WINDOWS\system32>net share Ripbot264temp=C:\Temp\ripbot264temp /grant:"tout le monde",FULL Ripbot264temp a été partagé. If no Quotation marks it doesnt work.... But every new file in my batch project i need to execute again & again this command. Ps : Tout le monde=Everyone Last edited by Asmeralde; 9th September 2017 at 20:13. Reason: Precision |
||
10th September 2017, 19:15 | #15087 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
I think I have a working script. I've tested on french version of win10 and folder was shared correctly.
Please just test this on your machine. Copy all to notepad and save as ShareFolder.cmd Code:
set MySid=S-1-1-0 for /f "delims='' skip=1" %%a in ('"wmic path win32_account where SID='%MySid%' get name"') do ( set myvar=%%a goto :loop_end ) ) :loop_end call :Trim myvar %myvar% call :Share :Trim SetLocal EnableDelayedExpansion set params=%* for /f "tokens=1*" %%a in ("!Params!") do EndLocal & set %1=%%b exit /b :Share net share RipBot264temp /DELETE /Y net share RipBot264temp="C:\Temp\RipBot264temp" /GRANT:"%myvar%",FULL icacls "C:\Temp\RipBot264temp" /T /C /Q /Grant:R *%MySid%:(OI)(CI)F icacls "C:\Temp\RipBot264temp" /T /C /Q /inheritance:e pause
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper Last edited by Atak_Snajpera; 10th September 2017 at 19:21. |
10th September 2017, 20:20 | #15088 | Link | |
Registered User
Join Date: Jun 2002
Location: On thin ice
Posts: 6,837
|
Quote:
__________________
https://github.com/stax76/software-list https://www.youtube.com/@stax76/playlists |
|
10th September 2017, 20:54 | #15090 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
Do not worry it will be fixed in next version soon.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
12th September 2017, 15:14 | #15092 | Link | ||
Registered User
Join Date: Jan 2012
Posts: 104
|
AviSynth+ support?
Is there an official statement to the use of Avisynth+? Rather by chance I found a checkbox in settings "Avisynth+ MT". In forum I found no docu for this.
I really need the high bit depth and REC.2020 support, so I installed Avisynth+. On Add of avs I get error messages: Quote:
I assume RipBot distribution doesn't have Avisynth? Please clarify. Quote:
|
||
13th September 2017, 12:59 | #15093 | Link |
Registered User
Join Date: Aug 2008
Posts: 54
|
I have 2 questions regarding hardcoding subtitles from .mkv to .mp4.
1) is there a way to change the font type and size for the subtitles? I would like it to be "Univers CW 45 Light" and size "41" 2) Are there any plans to have the hardcoded subtitles feature available in Batch mode without having to edit each file? I wish it could allow you to select Subtitle 1 of subtitle 2, etc, and then use that selection for all the file in batch. In my particular case, Narcos and Game of Thrones only had 1 subtitle and it was only the Forced for foreign speaking parts. It would be a great feature if you could select it similar to how the audio is selected. |
13th September 2017, 16:38 | #15094 | Link | |
Registered User
Join Date: Jan 2010
Posts: 456
|
@Atak
Every time I change the audio from dts-hd to the dts file I get the error Quote:
Yesterday was ok
__________________
E5 2697 v2 @ 3.0GHz on P9X79 Deluxe 24GB Xeon E5-2680 v2 @ 3.1GHz 16GB Sony Vaio VPC-F13Z1E/B |
|
13th September 2017, 16:41 | #15095 | Link | ||
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
Quote:
Quote:
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper Last edited by Atak_Snajpera; 13th September 2017 at 16:43. |
||
13th September 2017, 17:42 | #15096 | Link |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
MT Issues, not sure why but FYI
Having an issue with 64bit AVISynth and the most recent update.
I'm on Encoding Server v1.8.0.0 AViSynth+ .01 (r2508, MT, i386) The problem is I know that I installed both the 64bit and 32bit versions and followed the update steps for r2508MT 64bit. RipBot is still defaulting to 32bit. I tried installing just the 64bit but then RipBot won't start. -I bring up the 32/64bit stuff because avs2yuv.exe starts and then my encode stalls at "starting..." when the 2GB limit is hit. -Not user if related, but I've noticed when the MT value in the setting is 0 (auto detect), I get Import("E:\!0-Trans\!2Tools\RipBot264v1.20.0\Tools\AviSynth plugins\Scripts\MTmodes.avs") #PREFETCH_LIMIT=2/8/10 for different videos in the queue, and not a consistent value. I've noticed I get this error sometimes and not others: Code:
List Index out of bounds (5) --Should say when MT is off I don't get close to the 2GB limit and encoding works fine.-- Last edited by byteshare; 13th September 2017 at 17:44. Reason: Extra Info |
13th September 2017, 19:13 | #15098 | Link | |||
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
Quote:
Quote:
Quote:
PREFETCH_LIMIT:=RoundToEven(1000000/(FrameWidth*FrameHeight)*16) With active MDegrain2 denoiser memory consumption should be always below 1GiB regardless of the frame size.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
|||
13th September 2017, 20:21 | #15099 | Link | |
Registered User
Join Date: Aug 2008
Posts: 54
|
Quote:
|
|
13th September 2017, 20:26 | #15100 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,815
|
Currently it only works if subtitle has the same name as video file.
for example: X:\Movie.mkv X:\Movie.srt
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
Tags |
264, 265, appletv, avchd, bluray, gui, iphone, ipod, ps3, psp, ripbot264, x264 2-pass, x264 gui, x264_64, x265, xbox360 |
|
|