Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
13th September 2017, 20:33 | #15101 | Link | |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
I thought the plugins that came with the 64bit AVISynth+ would be 64bit. My mistake, didn't think about it being more dependent on the plugins in RipBot.
I know MVTools and a few others should support 64bit. Quote:
Code:
LoadPlugin("C:\RipBot264v1.20.0\Tools\AviSynth plugins\hqdn3d\hqdn3d.dll") LoadPlugin("C:\RipBot264v1.20.0\Tools\AviSynth plugins\flash3kyuu_deband\flash3kyuu_deband.dll") LoadPlugin("C:\RipBot264v1.20.0\Tools\AviSynth plugins\masktools\masktools2.dll") Loadplugin("C:\RipBot264v1.20.0\Tools\AviSynth plugins\mvtools\mvtools2.dll") LoadPlugin("C:\RipBot264v1.20.0\Tools\AviSynth plugins\Custom\Deen.dll") Import("C:\RipBot264v1.20.0\Tools\AviSynth plugins\Custom\HQdering.avs") super = video.MSuper(pel=2) bv1 = MAnalyse(super, isb = true, delta = 1, overlap=4) fv1 = MAnalyse(super, isb = false, delta = 1, overlap=4) bv2 = MAnalyse(super, isb = true, delta = 2, overlap=4) fv2 = MAnalyse(super, isb = false, delta = 2, overlap=4) bv3 = MAnalyse(super, isb = true, delta = 3, overlap=4) fv3 = MAnalyse(super, isb = false, delta = 3, overlap=4) video=video.MDegrain3(super,bv1,fv1,bv2,fv2,bv3,fv3,thSAD=1000).HQDering(strength=255).f3kdb |
|
13th September 2017, 20:53 | #15103 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,816
|
@byteshare
Are you working with 4k footage that you can't go above 2?
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
14th September 2017, 17:09 | #15104 | Link | |
Registered User
Join Date: Jan 2010
Posts: 456
|
Quote:
__________________
E5 2697 v2 @ 3.0GHz on P9X79 Deluxe 24GB Xeon E5-2680 v2 @ 3.1GHz 16GB Sony Vaio VPC-F13Z1E/B |
|
14th September 2017, 20:25 | #15105 | Link |
Registered User
Join Date: Oct 2002
Location: Wonderland
Posts: 159
|
Hey!
My RipBot just stopped working after it updated to 1.20.1! Every prepared Movie in que just fails direct after I push START, all with the same fault in Error Message: " C:\>"C:\5.8 RipBot264 v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\5.8 RipBot264 v1.19.2\tools\x264\x264_x64.exe" --pass 1 --bitrate 10000 --stats "C:\Temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 185749 --sar 1:1 --threads 8 --pass 2 --level 4.1 --preset slower --vbv-bufsize 62500 --vbv-maxrate 62500 --filter 0,0 --ref 7 --no-mixed-refs --bframes 10 --b-adapt 2 --b-pyramid none --subme 7 --aq-mode 1 --trellis 2 --partitions all --me tesa --stdin y4m --output NUL - y4m [info]: 1920x800p 1:1 @ 10000000/417083 fps (cfr) x264 [info]: using SAR=1/1 x264 [warning]: DPB size (7 frames, 42000 mbs) > level limit (5 frames, 32768 mbs) x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX XOP FMA3 BMI1 x264 [error]: ratecontrol_init: can't open stats file x264 [error]: x264_encoder_open failed C:\Temp\RipBot264temp\job1\job1.avs: 1920x800, 10000000/417083 fps, 185749 frames error: wrote only 2285802 of 2304000 bytes C:\>"C:\5.8 RipBot264 v1.19.2\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\5.8 RipBot264 v1.19.2\tools\x264\x264_x64.exe" --pass 2 --bitrate 10000 --stats "C:\Temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 185749 --sar 1:1 --threads 8 --pass 2 --level 4.1 --preset slower --vbv-bufsize 62500 --vbv-maxrate 62500 --filter 0,0 --ref 7 --no-mixed-refs --bframes 10 --b-adapt 2 --b-pyramid none --subme 7 --aq-mode 1 --trellis 2 --partitions all --me tesa --stdin y4m --output "C:\Temp\RipBot264temp\video.264" - y4m [info]: 1920x800p 1:1 @ 10000000/417083 fps (cfr) x264 [info]: using SAR=1/1 x264 [warning]: DPB size (7 frames, 42000 mbs) > level limit (5 frames, 32768 mbs) x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX XOP FMA3 BMI1 x264 [error]: ratecontrol_init: can't open stats file x264 [error]: x264_encoder_open failed C:\Temp\RipBot264temp\job1\job1.avs: 1920x800, 10000000/417083 fps, 185749 frames error: wrote only 2285802 of 2304000 bytes C:\>"C:\5.8 RipBot264 v1.19.2\tools\mkvtoolnix\mkvmerge.exe" -o "C:\TEMP\Movie_2017.mkv" --compression 0:none --title "Movie_2017" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.264" mkvmerge v14.0.0 ('Flow') 32bit Error: The type of file 'C:\Temp\RipBot264temp\video.264' could not be recognized. ------------------------- Elapsed Time: 00h:00m:02s" What has happened here, can anyone please explain? P.S I havent changed a thing in setting nor in my Profiles/Avc/[HIGH 4.1] 1080p BÄSTA SLOWER . DEFAULT.txt , that I have used for years now. Last edited by MaistroX; 14th September 2017 at 20:29. |
14th September 2017, 20:35 | #15106 | Link |
Registered User
Join Date: Dec 2002
Posts: 5,565
|
First pass has both "--pass 1" and "--pass 2", first one gets ignored and it fails because naturally there is no pass file yet. But I don't know why RipBot did that. Or did you manually set "--pass 2" by accident somehow?
|
15th September 2017, 17:53 | #15108 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,816
|
So show us new log then.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
20th September 2017, 08:09 | #15112 | Link |
Registered User
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
|
Well, I have just discovered a major problem with the latest auto update.
I had a batch queue encoding using the previous update (11/09/17), and it was working well, so I then updated to (13/09/17), and the DE went berserk, only a couple of the 10 servers I had enabled, connected, and I could not re connect them. So now I'll have to "re install" the "vanilla" 1.20.0, and update up to the second last update....unless there's a fix, beforehand EDIT:- Well, it's all working nicely today.....the only thing that I have changed was, I disabled x264 OpenCL acceleration for my GTX 580 card..... Last edited by burt123; 21st September 2017 at 03:52. Reason: it's alright, today |
20th September 2017, 16:58 | #15113 | Link | |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
Quote:
|
|
21st September 2017, 13:33 | #15115 | Link |
Registered User
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
|
So I'm having a bit of a problem with the auto shutdown option.
I generally have a "main" pc doing the Ripbot "thing", and one server helping. Twice now (which is as many times as I've used it), when I have selected "Shutdown Servers" option, it shutdowns both pc's...I haven't tried the "Shutdown Client" option..... I have all 16 servers enabled, 10 on the main pc, and 6 on the "helper"....maybe that shutdown option can't tell the difference between the 2.... Also, auto update hasn't worked for the last couple of days |
21st September 2017, 14:26 | #15116 | Link | |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,816
|
Shutdown Servers option basically tells Encoding client to send shutdown command to ALL specified IP's. So It will shutdown your main PC as well if you also have running encodingserver.exe in background.
Quote:
I decided to abandon x86 mainly due to annoying 2 GiB limit which can be easily reached when working with multiple processing threads.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper Last edited by Atak_Snajpera; 21st September 2017 at 14:31. |
|
21st September 2017, 17:00 | #15117 | Link | |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
Quote:
|
|
21st September 2017, 17:12 | #15118 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,816
|
v1.21.0
Code:
Added: Support for AviSynth+ MT x64 (installer located in \Tools\AviSynth folder) Finally no need to automatically limit processing threads due to 32bit memory limitation. Warning! Jobs created by older version won't work with this version! You must start with freshly created job! Fixed: Various tweaks and changes under the hood. Updated: MKVToolnix v15.0.0, EncodingServer v1.8.1
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper Last edited by Atak_Snajpera; 21st September 2017 at 17:20. |
21st September 2017, 19:14 | #15119 | Link |
ByteShare
Join Date: Sep 2014
Location: On the Internet
Posts: 560
|
Playing with the new version now, love what you did with AVISynth installer.
For x265 I'm only seeing 1 file in the folder now: x265_x64.exe Before there were 4 files x265_x64.exe, x265_x64_10bit.exe, x265_x86.exe, and x265_x86_10bit.exe I wanted to update becase the x265 is on 2.5+4 and stable is 2.5+5 My question before is figuring out which files to take from: http://msystem.waw.pl/x265/ wasn't too hard before. The x265 files (for updating) come as: Code:
libx265_main.dll libx265_main10.dll libx265_main12.dll x265.exe x265_32.exe x265-8b.exe x265-8b_32.exe x265-10b.exe x265-10b_32.exe x265-12b.exe x265-12b_32.exe Suggestion? |
21st September 2017, 19:27 | #15120 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,816
|
Yes use the largest binary (all in one).
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
Tags |
264, 265, appletv, avchd, bluray, gui, iphone, ipod, ps3, psp, ripbot264, x264 2-pass, x264 gui, x264_64, x265, xbox360 |
|
|