Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Hardware & Software > Software players

Reply
 
Thread Tools Search this Thread Display Modes
Old 8th April 2016, 07:56   #37401  |  Link
AngelGraves13
Registered User
 
Join Date: Dec 2010
Posts: 254
Nevermind.

Last edited by AngelGraves13; 9th April 2016 at 05:42.
AngelGraves13 is offline   Reply With Quote
Old 8th April 2016, 11:11   #37402  |  Link
bbsc
Registered User
 
Join Date: Jan 2016
Posts: 13
Feature request.

Thanks madshi for this great software and support. Now madVR works just excellent in my old HTPC.

I'd like to ask for adding one feature, if possible.
There's "display modes madVR may switch to" string in settings and it works Ok.
Is it possible to add "default display mode" string with a single mode madVR would have to switch to when exiting?
I'd like to have this setting because the system stuck in 24p after rebooting in an unusual way, i.e. when pausing or playing video.
With this setting it would return to usual 50p or 60p after the next play/stop.

Thank you in advance.
bbsc is offline   Reply With Quote
Old 8th April 2016, 17:51   #37403  |  Link
huhn
Registered User
 
Join Date: Oct 2012
Posts: 7,903
madVR should already return back to the default refresh rate.

at least thre is an option for that: "restore original display mode..."
huhn is offline   Reply With Quote
Old 8th April 2016, 18:03   #37404  |  Link
sneaker_ger
Registered User
 
Join Date: Dec 2002
Posts: 5,565
He means in case of a crash, so madVR has no change to trigger a return. Personally, I'd probably just use a specific display mode changer, write a short batch file and put it into Window's auto-start folder.
E.g. "reset_display_mode.bat":
Code:
c:\dc.exe -width=1920 -height=1080 -depth=32 -refresh=60
http://12noon.com/?page_id=80
sneaker_ger is offline   Reply With Quote
Old 9th April 2016, 00:25   #37405  |  Link
CarlosCaco
Registered User
 
Join Date: Oct 2015
Location: Brasil, SP, São Paulo
Posts: 154
Quote:
Originally Posted by huhn View Post
of cause lanczos 4 is sharper. more tabs sinc based algorithm = sharper image.
that doesn't mean lanczos4 is a better choice.

the math used on the image should have the same results. if it is different something else is the cause.

I did not said its better, only coment its look like sharper because the guy says that 4 is smoother than 3
__________________
Desktop, i5 2500, 8GB, N570 GTX TF III PE/OC
Asus X555LF, i7-5500U, 6GB Ram, Nvidia 930m/HD 5500
Windows 8.1 Pro x64
CarlosCaco is offline   Reply With Quote
Old 9th April 2016, 00:29   #37406  |  Link
CarlosCaco
Registered User
 
Join Date: Oct 2015
Location: Brasil, SP, São Paulo
Posts: 154
Does anyone who have an nvidia gpu see any difference with triple buffering enabled on nv control panel? Should i enable this?
__________________
Desktop, i5 2500, 8GB, N570 GTX TF III PE/OC
Asus X555LF, i7-5500U, 6GB Ram, Nvidia 930m/HD 5500
Windows 8.1 Pro x64
CarlosCaco is offline   Reply With Quote
Old 9th April 2016, 00:35   #37407  |  Link
huhn
Registered User
 
Join Date: Oct 2012
Posts: 7,903
leave everything at application controlled
huhn is offline   Reply With Quote
Old 9th April 2016, 01:01   #37408  |  Link
CarlosCaco
Registered User
 
Join Date: Oct 2015
Location: Brasil, SP, São Paulo
Posts: 154
Quote:
Originally Posted by huhn View Post
leave everything at application controlled
Triple buffering don t have application controled option only on and off
__________________
Desktop, i5 2500, 8GB, N570 GTX TF III PE/OC
Asus X555LF, i7-5500U, 6GB Ram, Nvidia 930m/HD 5500
Windows 8.1 Pro x64
CarlosCaco is offline   Reply With Quote
Old 9th April 2016, 01:35   #37409  |  Link
aufkrawall
Registered User
 
Join Date: Dec 2011
Posts: 1,812
This setting is just for OpenGL and probably it's even for OpenGL just a corpse entry without any effect, like e.g. LOD bias clamp option.
aufkrawall is offline   Reply With Quote
Old 9th April 2016, 04:11   #37410  |  Link
neno
Registered User
 
Join Date: Feb 2014
Posts: 10
Hi~
I have two OS, and I need to use different madvr settings to them.
Can anyone tell me how to save all the settings in madvr or any way to load different settings?
Thanks very much!
neno is offline   Reply With Quote
Old 9th April 2016, 09:32   #37411  |  Link
chros
Registered User
 
chros's Avatar
 
Join Date: Mar 2002
Posts: 2,323
Quote:
Originally Posted by neno View Post
I have two OS, and I need to use different madvr settings to them.
Can anyone tell me how to save all the settings in madvr or any way to load different settings?
First of all, if you use madvr for a long time then it's wise to configure it from scratch on the new system, then copy its settings from there to the old one and modify it there. (I had problems in the past with my 4 years old settings, because I forgot that I had modified some d3d settings in it.)

Option 1: copying the settings.bin file from the madvr folder if it exist. The folder on both OS has to be writable.

Option 2. exporting and importing the registry entry using regedit:
Code:
HKEY_CURRENT_USER\Software\madshi
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config
chros is offline   Reply With Quote
Old 9th April 2016, 12:07   #37412  |  Link
bbsc
Registered User
 
Join Date: Jan 2016
Posts: 13
Quote:
Originally Posted by sneaker_ger View Post
Code:
c:\dc.exe -width=1920 -height=1080 -depth=32 -refresh=60
http://12noon.com/?page_id=80
Excellent.
Thank you.

The case is closed
bbsc is offline   Reply With Quote
Old 9th April 2016, 18:35   #37413  |  Link
XMonarchY
Guest
 
Posts: n/a
So has anyone figured out why some 1080p23/24 H.264 content runs perfectly with NNEDI3 Chroma Upscaling and NNEDI3 Luma Doubling @ 1080p @ 23/24Hz, while other 1080p23/24 H.264 content ends up having severe frame delays or drops?
  Reply With Quote
Old 9th April 2016, 18:41   #37414  |  Link
sneaker_ger
Registered User
 
Join Date: Dec 2002
Posts: 5,565
Define "1080p". Both 1920x1080 active pixels or some with cropping/black bars?
sneaker_ger is offline   Reply With Quote
Old 9th April 2016, 19:58   #37415  |  Link
AngelGraves13
Registered User
 
Join Date: Dec 2010
Posts: 254
SuperRes doesn't work with deinterlacing. Drops my render queue to 1.

IVTC works, but isn't suitable for most DVD content as the cadence breaks can be very jarring.
AngelGraves13 is offline   Reply With Quote
Old 9th April 2016, 20:18   #37416  |  Link
baii
Registered User
 
Join Date: Dec 2011
Posts: 180
Quote:
Originally Posted by AngelGraves13 View Post
SuperRes doesn't work with deinterlacing. Drops my render queue to 1.

IVTC works, but isn't suitable for most DVD content as the cadence breaks can be very jarring.
Probably your GPU is not powerful enough, native deinterlace usually mean 50 or 60fps.

Sent from my 306SH using Tapatalk
baii is offline   Reply With Quote
Old 9th April 2016, 20:54   #37417  |  Link
XMonarchY
Guest
 
Posts: n/a
Quote:
Originally Posted by sneaker_ger View Post
Define "1080p". Both 1920x1080 active pixels or some with cropping/black bars?
Ah! I just realized that 16:9 films are the ones stuttering and 21:9 films are the ones playing without problems. THANKS!


Now I just have to figure out whether it makes more sense to use:
1. Chroma Upscaling NNEDI3 256n + SuperRes (Strength 3) without Image Doubling OR 2. Some other Chroma Upscaling settings with Image Doubling NNEDI3 32n (set to Always) to get the best image possible without dropped frames in 16:9 films. I don't think its possible though...

I guess I need to make comparison shots and make a decision!
  Reply With Quote
Old 9th April 2016, 21:02   #37418  |  Link
huhn
Registered User
 
Join Date: Oct 2012
Posts: 7,903
can't wait for chroma nnedi3 256 comparison screens.
huhn is offline   Reply With Quote
Old 9th April 2016, 21:04   #37419  |  Link
Betroz
Is this for real?
 
Betroz's Avatar
 
Join Date: Mar 2016
Location: Norway
Posts: 168
Quote:
Originally Posted by XMonarchY View Post

Now I just have to figure out whether it makes more sense to use:
1. Chroma Upscaling NNEDI3 256n + SuperRes (Strength 3) without Image Doubling OR 2. Some other Chroma Upscaling settings with Image Doubling NNEDI3 32n (set to Always) to get the best image possible without dropped frames in 16:9 films. I don't think its possible though...
Try Chroma Upscaling NNEDI3 128 and Image Doubling/Quad to allways super-xbr, anti-bloating 25.
__________________
My HTPC : i9 10900K | nVidia RTX 4070 Super | TV : Samsung 75Q9FN QLED
Betroz is offline   Reply With Quote
Old 9th April 2016, 21:55   #37420  |  Link
AngelGraves13
Registered User
 
Join Date: Dec 2010
Posts: 254
Quote:
Originally Posted by baii View Post
Probably your GPU is not powerful enough, native deinterlace usually mean 50 or 60fps.

Sent from my 306SH using Tapatalk
I've got a 980 gtx. Don't really know what's better besides a Titan. Cpu is an i7.
AngelGraves13 is offline   Reply With Quote
Reply

Tags
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:15.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.