Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > (HD) DVD, Blu-ray & (S)VCD > DVD & BD Rebuilder

Reply
 
Thread Tools Search this Thread Display Modes
Old 4th May 2013, 16:34   #17001  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by Sharc View Post
The *.ssif directory issue is fixed with 0.44.03 and the encoding starts now, but x.264-bd.exe crashes immediately and BD-RB is aborted.
Is there anything special with x264-bd.exe which is put into the "mystic" Directory? Any tests you want me to do?

Edit:
Sorry - my mistake. I left a trim() command for testing purpose in the avisynth script. Apparently this caused the crash.
Encoding ....
Yeah, you can't do any seeking with DirectshowMVCSource() or it will crash -- so "Trim()" can't be used with it. One other thing that just hit me... if you don't have a video card that supports OpenCL you may have an issue with 3D encoding as well. That's because of the new version of X264. I guess I should copy the dummy opencl.dll file into that folder as well to prevent that. I wrote that code before the new X264 version was released.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 4th May 2013 at 16:38.
jdobbs is offline   Reply With Quote
Old 4th May 2013, 17:10   #17002  |  Link
Sharc
Registered User
 
Join Date: May 2006
Posts: 3,997
All ok so far .... just did an GM anaglyph successfully @ 1440x1080.
This led me to another question: Is left-right standardized for 3D blu-ray? I seem to remember cases where the channels have been swapped. When there is no possibility to swap the channels during playback, the GM (or CR) setting should be changed to MG (or RC respectively) for encoding.
Any thoughts?
Sharc is offline   Reply With Quote
Old 4th May 2013, 17:12   #17003  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,368
So i grabbed that BD3D2MK3D package and found the instructions & folder stereoplayer.exe inside it. If i read them instructions right i pretty much only need copy that folder to the harddrive & i'm done. Ifnot perhaps a clear set of instructions for it could be added to the 1st post of this thread.
Ch3vr0n is offline   Reply With Quote
Old 4th May 2013, 17:34   #17004  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by Ch3vr0n View Post
So i grabbed that BD3D2MK3D package and found the instructions & folder stereoplayer.exe inside it. If i read them instructions right i pretty much only need copy that folder to the harddrive & i'm done. Ifnot perhaps a clear set of instructions for it could be added to the 1st post of this thread.
That's it. Just make sure it is in a place that BD-RB can write to it so it can always keep the X264 version updated. (e.g. don't put it in the "Program Files" folder). Also, after testing it, if you feel it will be useful, please consider buying "MVC to AVI Encoder" from the site I referenced.

I'm hoping the Intel Directshow MVC decoder will work out and become a completely freeware solution that I can include with BD-RB in the future.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 4th May 2013 at 17:39.
jdobbs is offline   Reply With Quote
Old 4th May 2013, 17:52   #17005  |  Link
soneca
Registered User
 
Join Date: Feb 2008
Location: Brazil
Posts: 753
In the previous version the process was aborted, but with this version could encode one BD 3D successfully.
soneca is offline   Reply With Quote
Old 4th May 2013, 18:45   #17006  |  Link
jonnybravo
Registered User
 
Join Date: Mar 2007
Posts: 9
How would I set this up to output as a m2ts and fat compliant "under 4 gig". I have been using ripbot with no problem. I save as AVCHD 2 pass and lock size to 4103MB. But when I try that with this I get random results. Would it be possible for you jdobbs to and this as a output size?
I am just trying to do movie only. I go between mac,pc and ps3 with my thumbdrive to watch movies.
Thanks
jonnybravo is offline   Reply With Quote
Old 4th May 2013, 19:38   #17007  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,368
Oh BDRB has always been in program folders for me. I got that lousy UAC disabled ^^. Never any issues. However it seems that the x264 builds in that stereoplayer.exe are older than the ones from BDRB. Should i replace them with BDRB's ?

BDRB x264: 0.132.2309.0
Stereo x264: 0.130.2273.0

Or will BDRB do that on it's own?
Ch3vr0n is offline   Reply With Quote
Old 4th May 2013, 19:48   #17008  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by jonnybravo View Post
How would I set this up to output as a m2ts and fat compliant "under 4 gig". I have been using ripbot with no problem. I save as AVCHD 2 pass and lock size to 4103MB. But when I try that with this I get random results. Would it be possible for you jdobbs to and this as a output size?
I am just trying to do movie only. I go between mac,pc and ps3 with my thumbdrive to watch movies.
Thanks
You'd have to set a custom output to less than 2GB.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 4th May 2013, 19:50   #17009  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by Ch3vr0n View Post
Oh BDRB has always been in program folders for me. I got that lousy UAC disabled ^^. Never any issues. However it seems that the x264 builds in that stereoplayer.exe are older than the ones from BDRB. Should i replace them with BDRB's ?

BDRB x264: 0.132.2309.0
Stereo x264: 0.130.2273.0

Or will BDRB do that on it's own?
BD-RB copies X264 to that folder every time it encodes. You'll see it called X264-RB.EXE. I rename it so I don't overwrite someone else's version.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 4th May 2013, 20:00   #17010  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,368
kk, then i don't need to do anything. For simplicity i copied that folder into BDRB's "Tools" Folder. Same as i did with my DGDecNV . No possible chance of write access problems then ^^. Even though BDRB is in the program Files (x86) folder. I'll be trying that option out real soon.
Ch3vr0n is offline   Reply With Quote
Old 4th May 2013, 22:03   #17011  |  Link
omegaman7
Registered User
 
omegaman7's Avatar
 
Join Date: Jan 2010
Location: USA, Oregon
Posts: 791
Quote:
Originally Posted by AmigaFuture View Post
Thank you, JDobbs, I shall check Robin Hood: Prince of Thieves...
What was your problem with it? I have it on the back burner. Haven't ran it yet.
__________________
Only one rooster, need be in the hen house...
omegaman7 is offline   Reply With Quote
Old 5th May 2013, 04:59   #17012  |  Link
AmigaFuture
Registered User
 
AmigaFuture's Avatar
 
Join Date: Apr 2003
Location: Within the main Source.
Posts: 895
Quote:
Originally Posted by omegaman7 View Post
What was your problem with it? I have it on the back burner. Haven't ran it yet.
The challenge I've noticed is... It's an extra. Movie & Menus with selective extras not to be blanked.
Attached Images
 
__________________
Life is not a journey to the grave; but rather to skid out broadside, thoroughly used, torn and warn and loudly proclaim; WOW; What a ride!!! Soon, I'm going to do it AGAiN in different skin!!

Last edited by AmigaFuture; 5th May 2013 at 06:15.
AmigaFuture is offline   Reply With Quote
Old 5th May 2013, 06:12   #17013  |  Link
Mark_Venture
Registered User
 
Join Date: Jan 2010
Posts: 225
Quote:
Originally Posted by jdobbs View Post
I have updated the first post of this thread with a link to the latest release of BD-RB (v0.44.03).
Does this version include the --engage no_cue_duration --engage no_cue_relative_position fix?
Mark_Venture is offline   Reply With Quote
Old 5th May 2013, 08:02   #17014  |  Link
richardrpg
Registered User
 
Join Date: Nov 2011
Location: South Africa
Posts: 23
I just tried my first 3D encode with v0.44.03 and everything went fine until the rebuild phase when I get an "error in attempt to mux (MKVMERGE).

[05/04/13] BD Rebuilder v0.44.03 (beta)
[22:42:05] Source: LIFE_OF_PI_00800
- Input BD size: 27.20 GB
- Approximate total content: [02:06:59.611]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, 640Kbs DD5.1
- 3D conversion mode enabled
- Decoding/Frame serving: DirectShowMVC
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[22:42:16] PHASE ONE, Encoding
- [22:42:16] Processing: VID_01217_3D (1 of 1)
- [22:42:16] Combining multiple 3D segments.
- [22:52:05] Extracting A/V streams [VID_01217]
- [22:56:48] Reencoding video [VID_01217]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 182,688 frames
- Converting output to Side-By-Side 3D Format
- Bitrate: 7,570 Kbs
- [22:56:48] Reencoding: VID_01217, Pass 1 of 2
- [00:09:21] Reencoding: VID_01217, Pass 2 of 2
- [01:20:50] Video Encode complete
- [01:20:50] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
[01:23:13]PHASE ONE complete
[01:23:13]PHASE TWO - Rebuild Started
- [01:23:13] Building ALTERNATE OUTPUT Structure
- ERROR in attempt to mux (MKVMERGE)
[01:28:53] - Failed to REBUILD

edit:
I went into the work files and saw two x264 streams of the same sizes, I manually muxed them with an old build of mkvmerge, the resulting two mkv files both play in sbs format but each side's video is out of sync by 10seconds on the one mkv and even more on the other mkv. I have no knowledge of how all this encoding works, so if I'm doing something dumb, dont hesitate to correct me. I'll try the next encode with a different 3D blu-ray and use the DirectShowMVCSource.dll and files from MVC Player Free v0.0.1.5 and not BD3D2MK3D as I did with the first encode.

Last edited by richardrpg; 5th May 2013 at 09:42.
richardrpg is offline   Reply With Quote
Old 5th May 2013, 12:04   #17015  |  Link
richardrpg
Registered User
 
Join Date: Nov 2011
Location: South Africa
Posts: 23
Just ran another 3D encode (Thor 3D) and it worked perfectly, I used the DirectShowMVCSource.dll and files from MVC Player Free v0.0.1.5 and not BD3D2MK3D. I also checked the work files and there is only 1 x264 stream and not 2 as with the previous encode of Life of Pi. I did notice that with Life of Pi, there was an extra step used during the encode, namely "Combining multiple 3D segments." which did not happen with Thor.
I'll run Life of Pi again with my current set-up as I know the set-up works and then should have clarity whether its a BD-rebuilder bug or an issue with Life of Pi itself.
richardrpg is offline   Reply With Quote
Old 5th May 2013, 13:57   #17016  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by Mark_Venture View Post
Does this version include the --engage no_cue_duration --engage no_cue_relative_position fix?
Yes. It does.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 5th May 2013, 14:00   #17017  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by richardrpg View Post
Just ran another 3D encode (Thor 3D) and it worked perfectly, I used the DirectShowMVCSource.dll and files from MVC Player Free v0.0.1.5 and not BD3D2MK3D. I also checked the work files and there is only 1 x264 stream and not 2 as with the previous encode of Life of Pi. I did notice that with Life of Pi, there was an extra step used during the encode, namely "Combining multiple 3D segments." which did not happen with Thor.
I'll run Life of Pi again with my current set-up as I know the set-up works and then should have clarity whether its a BD-rebuilder bug or an issue with Life of Pi itself.
The "combine" step only occurs when the source playlist is made up of more than one M2TS/CLPI segment (multipart).
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 5th May 2013, 14:59   #17018  |  Link
richardrpg
Registered User
 
Join Date: Nov 2011
Location: South Africa
Posts: 23
Completed Life of Pi 3D with exactly the same settings as Thor 3D, again I get the error "failed to rebuild" it rebuilds up to 100% and then stops and sends that partial rebuild to the work files.
Seems there is something different about the Life of Pi 3D disc, even if I remux that partial build, the resultant mkv is in sbs format, but as before the 2 sides are way out of sync.
Someone who has more knowledge regarding encoding can take a stab at Life of Pi 3D.



----------------------
[05/05/13] BD Rebuilder v0.44.03 (beta)
[13:10:07] Source: LIFE_OF_PI_00800
- Input BD size: 27.20 GB
- Approximate total content: [02:06:59.611]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, 640Kbs DD5.1
- 3D conversion mode enabled
- Decoding/Frame serving: DirectShowMVC
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[13:10:10] PHASE ONE, Encoding
- [13:10:10] Processing: VID_01217_3D (1 of 1)
- [13:10:10] Combining multiple 3D segments.
- [13:17:42] Extracting A/V streams [VID_01217]
- [13:21:39] Reencoding video [VID_01217]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 182,688 frames
- Converting output to Side-By-Side 3D Format
- Bitrate: 7,570 Kbs
- [13:21:39] Reencoding: VID_01217, Pass 1 of 2
- [14:34:40] Reencoding: VID_01217, Pass 2 of 2
- [15:45:23] Video Encode complete
- [15:45:23] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
[15:47:44]PHASE ONE complete
[15:47:44]PHASE TWO - Rebuild Started
- [15:47:44] Building ALTERNATE OUTPUT Structure
- ERROR in attempt to mux (MKVMERGE)
[15:52:32] - Failed to REBUILD
richardrpg is offline   Reply With Quote
Old 5th May 2013, 15:26   #17019  |  Link
Sharc
Registered User
 
Join Date: May 2006
Posts: 3,997
^^
What happens if you remux into blu-ray format instead of mkv container?

I did Life of Pi 3D some time ago with BD3D2MK3D, but remuxed the files manually into blu-ray format using tsMuxer.
It worked flawlessly.
Sharc is offline   Reply With Quote
Old 5th May 2013, 15:28   #17020  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by richardrpg View Post
Completed Life of Pi 3D with exactly the same settings as Thor 3D, again I get the error "failed to rebuild" it rebuilds up to 100% and then stops and sends that partial rebuild to the work files.
Seems there is something different about the Life of Pi 3D disc, even if I remux that partial build, the resultant mkv is in sbs format, but as before the 2 sides are way out of sync.
Someone who has more knowledge regarding encoding can take a stab at Life of Pi 3D.



----------------------
[05/05/13] BD Rebuilder v0.44.03 (beta)
[13:10:07] Source: LIFE_OF_PI_00800
- Input BD size: 27.20 GB
- Approximate total content: [02:06:59.611]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: MKV Container, 1920x1080, 640Kbs DD5.1
- 3D conversion mode enabled
- Decoding/Frame serving: DirectShowMVC
- Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[13:10:10] PHASE ONE, Encoding
- [13:10:10] Processing: VID_01217_3D (1 of 1)
- [13:10:10] Combining multiple 3D segments.
- [13:17:42] Extracting A/V streams [VID_01217]
- [13:21:39] Reencoding video [VID_01217]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 182,688 frames
- Converting output to Side-By-Side 3D Format
- Bitrate: 7,570 Kbs
- [13:21:39] Reencoding: VID_01217, Pass 1 of 2
- [14:34:40] Reencoding: VID_01217, Pass 2 of 2
- [15:45:23] Video Encode complete
- [15:45:23] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
[15:47:44]PHASE ONE complete
[15:47:44]PHASE TWO - Rebuild Started
- [15:47:44] Building ALTERNATE OUTPUT Structure
- ERROR in attempt to mux (MKVMERGE)
[15:52:32] - Failed to REBUILD
If the two sides are out of sync, I would suspect a bad rip. Are you ripping with AnyDVD?

I'll do a few discs to MKV and see if I run into any issues. I seem to recall someone mentioning an alternate version of MKVMERGE for some systems...
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 5th May 2013 at 15:31.
jdobbs is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.