Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
11th April 2010, 14:54 | #381 | Link | |
Registered User
Join Date: Dec 2001
Location: Viersen, Germany
Posts: 270
|
Well...I guess I have to tell you, that you´re wrong!
I does work INSTANDLY within Megui. Just updated it to the latest build and works like a charm with that little script. /EDIT: Oversaw your hint at first. It seems it is reasoned by avs2yuv. Since I get an error message like: "doesn´t look like an avisynth script". The same unchanged avs-file that CURRENTLY works within megui. Here is the full script for reference: Quote:
Last edited by Rodger; 11th April 2010 at 15:02. |
|
11th April 2010, 15:11 | #382 | Link | |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
What I told you are simple facts.
Quote:
However you should try to track down the issue by reducing the script as much as possible. For example: Remove all the unneeded lines that are commented out. Then try removing LanczosResize. If that doesn't make a difference, try a different source filter (i.e. FFVideoSource instead of AVISource). (BTW: What version of Avisynth do you have installed ???) EDIT: And try replacing "a.avi" with the fully qualified path to your input file (such as "C:\Some Folder\a.avi"), just to be sure.
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ Last edited by LoRd_MuldeR; 11th April 2010 at 15:20. |
|
11th April 2010, 15:17 | #383 | Link |
Registered User
Join Date: Dec 2001
Location: Viersen, Germany
Posts: 270
|
AVISynth V2.58
Well....As I already said....it´s not related to the disabled lines. As soon as I disable the lancos4resize line the script works. You made a good sugguestion! I´ll try to change it "simple" lancosresize. But of course I wanted to use lanczos4resize because of the better upsizing. /EDIT: Nah...doesn´t work too. Seems avs2yuv doesn´t like the resize filters of avisynth. Last edited by Rodger; 11th April 2010 at 15:23. |
11th April 2010, 15:23 | #384 | Link |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Same issue with any resizer (e.g. BiCubicResize, Spline36Resize or PointResize), or is it just Lanczos4Resize ???
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
22nd April 2010, 19:17 | #386 | Link |
Registered User
Join Date: Dec 2001
Location: Viersen, Germany
Posts: 270
|
For all who can use it.
Here is a new Version of my "Excel-Bitrate-Calc". Added new Media-Types and optimized the settings for newer revisions of x264 since I experienced x264 builds smaller files. Still comments or Infos are welcome on this one. Last edited by Rodger; 22nd April 2010 at 19:20. |
25th April 2010, 13:49 | #387 | Link |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Updated x264 to r1564 (Komisar's builds).
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
29th April 2010, 08:56 | #388 | Link |
User of free A/V tools
Join Date: Jul 2006
Location: SK
Posts: 826
|
Another small request LM if I may...
After the encoding process completed there is output window shown with report details which is fine of course. When CRF was used (1-pass method in general probably) there is only one option presented for right-click: Copy to clipboard. This is also good and I like it this way because frankly, what other actions could anyone want to do with final report, isn't it? However, when 2-pass encode completes, the window has different right-click menu: IMHO it's rather counter-productive this way because I need to make two clicks now to get the contents copied into clipboard (first Select all, then Copy). Could this menu be replaced to be identical with CRF style report, please? |
29th April 2010, 11:01 | #389 | Link | |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Quote:
I can use the my custom context menu in the "report" window easily, if you like. But probably not before Sunday...
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
|
10th May 2010, 13:20 | #392 | Link |
Registered User
Join Date: Aug 2009
Posts: 135
|
Nice tool.
Win7 32bit Intel 980x Hyperthreading = on /12 threads. Currently clocked at 4.2Ghz. http://valid.canardpc.com/show_oc.php?id=1178119 I have to rebuild my 64bit raid array, it died on me uggg... When the drives come in stock I'll run it via 64bit win7. If you toss in a auto resizer and NeroAac audio handling I would use this as my main encoder! Code:
Source: C:\Chosen.mov Output: C:\Output.mp4 Preset: Veryslow Tuning: Film Profile: High Params: --keyint 750 x264 0.94.1583M 7608d73 built on May 9 2010, gcc: 4.4.4 (x86.core2.Komisar) Revision: 1583 Commandline for x264: C:\x264_x64.2010-04-25\x264.exe --preset veryslow --tune film --crf 22.0 --keyint 750 --output C:\Output.mp4 --demuxer ffms --index C:\Users\980\AppData\Local\Temp\~14FC3617328D3588A3CE6235F8E31A5F1AC64986.x264-index C:\Output.mp4 ffms [info]: 720x320p 1:1 @ 24/1 fps (vfr) x264 [info]: using SAR=1/1 x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 x264 [info]: profile High, level 3.1 x264 [info]: frame I:11 Avg QP:22.46 size: 18588 x264 [info]: frame P:305 Avg QP:25.17 size: 4697 x264 [info]: frame B:479 Avg QP:26.67 size: 2225 x264 [info]: consecutive B-frames: 15.3% 7.4% 9.2% 64.3% 3.8% 0.0% 0.0% 0.0% 0.0% x264 [info]: mb I I16..4: 22.7% 58.4% 18.9% x264 [info]: mb P I16..4: 14.7% 13.6% 4.5% P16..4: 21.9% 8.8% 1.6% 0.1% 0.0% skip:34.7% x264 [info]: mb B I16..4: 2.3% 2.3% 0.4% B16..8: 31.3% 8.2% 1.6% direct: 6.3% skip:47.6% L0:41.7% L1:46.7% BI:11.6% x264 [info]: 8x8 transform intra:43.5% inter:81.2% x264 [info]: direct mvs spatial:97.9% temporal:2.1% x264 [info]: coded y,uvDC,uvAC intra: 42.6% 50.0% 15.7% inter: 15.0% 16.9% 1.4% x264 [info]: i16 v,h,dc,p: 42% 33% 7% 18% x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 17% 13% 7% 9% 9% 12% 9% 14% x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 17% 6% 7% 11% 10% 12% 9% 16% x264 [info]: i8c dc,h,v,p: 44% 33% 13% 10% x264 [info]: Weighted P-Frames: Y:23.6% x264 [info]: ref P L0: 57.5% 13.2% 16.5% 5.5% 2.3% 1.2% 0.9% 0.5% 0.4% 0.3% 0.8% 0.3% 0.2% 0.1% 0.2% 0.1% x264 [info]: ref B L0: 87.5% 6.8% 2.3% 0.8% 0.5% 0.4% 0.3% 0.2% 0.2% 0.2% 0.1% 0.2% 0.3% 0.1% 0.1% x264 [info]: ref B L1: 96.7% 3.3% x264 [info]: kb/s:652.76 encoded 795 frames, 42.76 fps, 652.93 kb/s Last edited by CpT; 10th May 2010 at 13:25. |
10th May 2010, 15:54 | #393 | Link | |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Quote:
Audio encoding support is on the "to do" list of x264, as far as I know. The same goes for video filters (e.g. resize). Until then you'll have to use Avisynth input and do the resize in your AVS script...
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
|
10th May 2010, 19:17 | #394 | Link |
Registered User
Join Date: Sep 2009
Posts: 83
|
Lord Mulder, is there a way to set your program to make x264 to run in different priority modes, such as Low if I need to do other stuff while I'm encoding? Is that saved in a preference file or in the registry somewhere?
|
16th May 2010, 11:45 | #395 | Link |
Registered User
Join Date: Dec 2009
Posts: 6
|
Why would you need that? It currently starts x264 on below normal priority, which is enough to not slow down too much the processes that run on normal priority. You can even play games with no stuttering while x264 runs on below normal. If you really have a fixation with this, you can always use task manager to lower x264 priority to Low, but I find it pointless.
|
16th May 2010, 17:30 | #396 | Link | |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Quote:
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
|
16th May 2010, 17:34 | #397 | Link |
Registered User
Join Date: Jan 2005
Location: london, england
Posts: 509
|
I like the choice as i often leave the pc unattended for a long time, ie over night and want the confidence if my anti virus starts a search or whatever, x264 will always run at full speed.
ripbot has the option and changing it in the task bar is pain if it can be done simpler in software |
17th May 2010, 02:14 | #398 | Link | |
Registered User
Join Date: Sep 2009
Posts: 83
|
Quote:
|
|
17th May 2010, 02:26 | #399 | Link | |
Software Developer
Join Date: Jun 2005
Location: Last House on Slunk Street
Posts: 13,248
|
Quote:
And I assume 99% of all users will be happy with x264 running at below normal priority, as this way x264 will neither slow down other "foreground" applications nor will "background" tasks slow down x264. Anyway, you can change the default priority by adjusting one single line of source code, if you really need to Code:
Process.Priority := ppBelowNormal;
__________________
Go to https://standforukraine.com/ to find legitimate Ukrainian Charities 🇺🇦✊ |
|
7th June 2010, 12:34 | #400 | Link |
Registered User
Join Date: Nov 2004
Location: Russia
Posts: 11
|
Thank you for this wonderful tool ) It's really make my life easier )
Just one question. I want to use crf + pass2 mode. But launcher rejects "--pass 1" parameter in crf mode. So no .stats I receive. Could you fix it or what am I doing wrong?
__________________
In vino veritas |
|
|