BD Rebuilder Beta - Bug Reports Only - Page 123

Furiousflea · 8th April 2009, 19:13

Quote:

Originally Posted by mhammer

I found the problem why my BD35 doesn´t play the reencodes in 24p.

Look at the video high: 1088 is wrong. Orginal is 1080.

If the Video is 1920x1080 all is fine.

@jdobbs: could you take a look at this! Thx

-- (done by Mediainfo)
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Duration : 9mn 59s
Bit rate : 25.1 Mbps
Nominal bit rate : 25.0 Mbps
Width : 1 920 pixels
Height : 1 088 pixels
Display aspect ratio : 16/9
Frame rate : 23.976 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.501
Writing library : x264 core 67 r1136M 3f9ba82

nope, 1088 is a valid vertical resolution believe it or not.

mhammer · 8th April 2009, 19:18

Quote:

Originally Posted by Furiousflea

nope, 1088 is a valid vertical resolution believe it or not.

But not for Blu-ray:

Resolution Frame rate Aspect ratio Codec
1920x1080 59.94-i, 50-i 16:9
1920x1080 24-p, 23.976-p 16:9
1920x800 24-p, 23.976-p 2.40:1
1440x1080 59.94-i, 50-i 16:9 MPEG-4 AVC / SMPTE VC-1 only
1440x1080 24-p, 23.976-p 16:9 MPEG-4 AVC / SMPTE VC-1 only
1280x720 59.94-p, 50-p 16:9
1280x720 24-p, 23.976-p 16:9
720x480 59.94-i 4:3/16:9
720x576 50-i 4:3/16:9

http://en.wikipedia.org/wiki/Blu-ray_Disc

vcarter · 8th April 2009, 19:40

Quote:

Originally Posted by vcarter

@jdobbs

with BD RB 0.20.05

in setup,because i wanted to keep dts i've only checked "do not convert dts to ac3".

i had this audio;DTS 1.5 mbps and now i got AC3 448 kbs

here's the ini

DTS_REENCODE=0
AC3_REENCODE=1
AC3_640=0
KEEP_HD_AUDIO=0

if i only got one audio track "do not convert dts to ac3" has priority on the other options, isn't it?

so if there's DTS_REENCODE=0,you can't also have AC3_REENCODE=1

if i got the solution,can i use the files in "workfiles"?

thanx

is there a solution for my problem,please?

bye

tinker1971 · 8th April 2009, 21:18

Quote:

Originally Posted by tekmobile

Are you using the version of tsmuxer that was included with BD-RB if so thats your problem you need to replace it with 1.8.35

no but i have just updated it cheers thanks for your reply

Furiousflea · 8th April 2009, 21:54

Quote:

Originally Posted by mhammer

But not for Blu-ray:

Resolution Frame rate Aspect ratio Codec
1920x1080 59.94-i, 50-i 16:9
1920x1080 24-p, 23.976-p 16:9
1920x800 24-p, 23.976-p 2.40:1
1440x1080 59.94-i, 50-i 16:9 MPEG-4 AVC / SMPTE VC-1 only
1440x1080 24-p, 23.976-p 16:9 MPEG-4 AVC / SMPTE VC-1 only
1280x720 59.94-p, 50-p 16:9
1280x720 24-p, 23.976-p 16:9
720x480 59.94-i 4:3/16:9
720x576 50-i 4:3/16:9

http://en.wikipedia.org/wiki/Blu-ray_Disc

I don't care what wikipedia doesn't say. I'm pretty sure I'm right. What do you mean "not for bluray"...What else would I be talking about in the BDRB thread?

tinker1971 · 9th April 2009, 10:30

Quote:

Originally Posted by tinker1971

no but i have just updated it cheers thanks for your reply

updated tsmuxer to the latest version worked great thanks for your help

unixman2 · 9th April 2009, 12:09

Quote:

Originally Posted by vcarter

is there a solution for my problem,please?

It's hard to tell what your problem is. BDRebuider "will" extract the dts audio track properly if you don't keep the HD audio.

1. Start by reading this guide which will explain the proper use of the audio options if it's unclear to you. http://forum.doom9.org/showthread.php?t=145024

2. Make sure you are not using the version of tsmuxer that comes with 20.05, obtain the latest version, 1.8.35 works.

3. Start from scratch after you've done these 2 things. You could work from your working files, but it would be hard to explain if you only have basic experience with this stuff.

4. Try reading back through several days of this thread to get a feel of what others have been doing to solve their issues.

drmih · 9th April 2009, 14:17

A bit of help please, slightly off topic.

I have just got Wallace and Gromit Loaf and Death and I'm going to make a back up before the kids have chance to trash it. The actual disc is only 9.5Gb, with the movie 6.5 Gb. I have run it through BD-RB fine and there is no issue. However, it's obvious that I can keep the main movie intact and only re-encode the extras. I therefore ran bd-rb again and forced a smaller custom size. This was fine and now I want to create a new structure. If I copy the m2ts and clpi file from the original everything functions correctly but I get dumped into the movie about halfway through. If I use the clpi from the bd-rb everything is fine except I can't access the True HD audio (it says Dolby Digital and there's no audio).
The question is which clpi (or other file) should I look to modify - the original with the wrong offset or the new one with the wrong audio flag. I have played a bit with bdedit, but can never figure a way of editing the audio streams, and have heard of fixclpi but that doesn't sound quite what I need.

deank · 9th April 2009, 15:12

You'll need the original mpls file for the main movie, too. If it doesn't contain other m2ts files probably it will work.

drmih · 9th April 2009, 15:42

Quote:

Originally Posted by deank

You'll need the original mpls file for the main movie, too. If it doesn't contain other m2ts files probably it will work.

Thanks - that fixed it using the m2ts / clpi / mpls original files.

**Everything is fine on a PC but on a Sony standalone the main movie video and audio are very jerky - quite strange as they are untouched.

vcarter · 9th April 2009, 19:02

Quote:

Originally Posted by unixman2

It's hard to tell what your problem is. BDRebuider "will" extract the dts audio track properly if you don't keep the HD audio.

1. Start by reading this guide which will explain the proper use of the audio options if it's unclear to you. http://forum.doom9.org/showthread.php?t=145024

2. Make sure you are not using the version of tsmuxer that comes with 20.05, obtain the latest version, 1.8.35 works.

3. Start from scratch after you've done these 2 things. You could work from your working files, but it would be hard to explain if you only have basic experience with this stuff.

4. Try reading back through several days of this thread to get a feel of what others have been doing to solve their issues.

from what i can read

"The first option "Do no convert DTS to AC3". If this is selected and your bluray has a DTS\DTS-HD\DTSMA audio track, then it will not be re-encoded to AC3"

i can say there's a bug in 20.05,cause i get ac3 with this option selected.

may be it's tsmuxer,cause i've used the one in bdrb's package

@+

DaMacFunkin · 9th April 2009, 21:40

Twilight Region B doesn't work, replaced tsmuxer with new one so i can keep HD audio (5.1 dts-hd master audio)
Summary of problem , disk boots fine, plays studio logos and trailers, goes to main menu - any attempt to play film either from play movie command or scene selection results in play looping back to main menu... any attempt to play extras results in audio, but no video

My reults are on panasonic BD30, i am no longer using fixclpi=0 since this was apparently fixed.
If you need any more details please let me know what.
p.s. if you count a lot of universal titles there is a mounting list of films that this program doesn't work with....

turbojet · 10th April 2009, 00:42

Quote:

Originally Posted by DaMacFunkin

Twilight Region B doesn't work, replaced tsmuxer with new one so i can keep HD audio (5.1 dts-hd master audio)
Summary of problem , disk boots fine, plays studio logos and trailers, goes to main menu - any attempt to play film either from play movie command or scene selection results in play looping back to main menu... any attempt to play extras results in audio, but no video

My reults are on panasonic BD30, i am no longer using fixclpi=0 since this was apparently fixed.
If you need any more details please let me know what.
p.s. if you count a lot of universal titles there is a mounting list of films that this program doesn't work with....

If you aren't already try a tsmuxer build between 1.8.30 and 1.8.34 like 1.8.30.
Older versions don't work well with HD audio, newer versions break playback in some standalones with bluray output (which BD-RB uses).

stef73 · 10th April 2009, 03:39

Quote:

Originally Posted by DaMacFunkin

Twilight Region B doesn't work, replaced tsmuxer with new one so i can keep HD audio (5.1 dts-hd master audio)
Summary of problem , disk boots fine, plays studio logos and trailers, goes to main menu - any attempt to play film either from play movie command or scene selection results in play looping back to main menu... any attempt to play extras results in audio, but no video

My reults are on panasonic BD30, i am no longer using fixclpi=0 since this was apparently fixed.
If you need any more details please let me know what.
p.s. if you count a lot of universal titles there is a mounting list of films that this program doesn't work with....

hiya mate i did twighlight yesterday and it plays perfectly well on my BD35

GaPony · 10th April 2009, 04:23

It could have been an AnyDVD issue. There have been several beta releases over the past 24hrs. The current version is beta 6.5.3.9.

DaMacFunkin · 10th April 2009, 10:39

Quote:

Originally Posted by turbojet

If you aren't already try a tsmuxer build between 1.8.30 and 1.8.34 like 1.8.30.
Older versions don't work well with HD audio, newer versions break playback in some standalones with bluray output (which BD-RB uses).

Mmm i have already done a couple of disks with the new TS Muxer to keep HD Audio, and i havn't changed my anydvd this week, do you still think that is the problem? and if so will i lose HD Audio by going back to 1.8.30 and if so will i have to untick keep HD Audio

turbojet · 10th April 2009, 11:05

If you already had some success with tsmuxer 1.8.35+ then it won't be that, it's just that the bluray output changed dramatically with these new versions and I haven't seen one report of a player that's working with it. 1.8.30 works fine with HD audio unless you have DTS MA and popcorn hour or tvix player.

colinhunt · 10th April 2009, 11:33

Did South Park S12 D3 last night. Original disc is 26.6 GB and Full Backup turned out to be only 21.4 GB. So while the backup is undersized, it seems to be working perfectly, TrueHD audio and all. Used RB v0.20.05 with tsmuxer 1.9.1(b).

Lif3styl3 · 10th April 2009, 12:02

hi,

i've tried reenconding erin brokovich leaving true hd on disk,....

used actual bd-rebuilder and tsmuxxer 1.9.1(b).

the reencodes disc works on computer, laptop and my bd-55, but the sound is stuttering.

I've got this problem with any bd using keep hd audio.

I'always do a movie only backup with the following sound configuration:
keep hd audio = on
dts reencode = off
ac3 reencode = off
ac3_640 off

using tsmuxxer only to keep hd data, everything is ok,...., but the filsize is too high in some case so i have to use bd-rebuilder
any ideas ?

stef73 · 10th April 2009, 12:41

Quote:

Originally Posted by DaMacFunkin

Mmm i have already done a couple of disks with the new TS Muxer to keep HD Audio, and i havn't changed my anydvd this week, do you still think that is the problem? and if so will i lose HD Audio by going back to 1.8.30 and if so will i have to untick keep HD Audio

hiya mate im using tsmuxer 1.8.35 and anydvd 6.5.2.6 and theyve all worked on panasonic BD35 but still not on my ps3

9th April 2009, 15:12	#2449 \| Link
deank Programmer (or just 教务长) Join Date: Oct 2008 Location: Valencia, Spain Posts: 4,251	You'll need the original mpls file for the main movie, too. If it doesn't contain other m2ts files probably it will work. __________________ multiAVCHD - donate \| popBD \| uncropMKV \| mkv2avi \| easySUP

10th April 2009, 12:02	#2459 \| Link
Lif3styl3 Registered User Join Date: Feb 2009 Posts: 28	hi, i've tried reenconding erin brokovich leaving true hd on disk,.... used actual bd-rebuilder and tsmuxxer 1.9.1(b). the reencodes disc works on computer, laptop and my bd-55, but the sound is stuttering. I've got this problem with any bd using keep hd audio. I'always do a movie only backup with the following sound configuration: keep hd audio = on dts reencode = off ac3 reencode = off ac3_640 off using tsmuxxer only to keep hd data, everything is ok,...., but the filsize is too high in some case so i have to use bd-rebuilder any ideas ? Last edited by Lif3styl3; 10th April 2009 at 12:05.

9th April 2009, 14:17	#2448 \| Link
drmih Registered User Join Date: Apr 2002 Posts: 590	A bit of help please, slightly off topic. I have just got Wallace and Gromit Loaf and Death and I'm going to make a back up before the kids have chance to trash it. The actual disc is only 9.5Gb, with the movie 6.5 Gb. I have run it through BD-RB fine and there is no issue. However, it's obvious that I can keep the main movie intact and only re-encode the extras. I therefore ran bd-rb again and forced a smaller custom size. This was fine and now I want to create a new structure. If I copy the m2ts and clpi file from the original everything functions correctly but I get dumped into the movie about halfway through. If I use the clpi from the bd-rb everything is fine except I can't access the True HD audio (it says Dolby Digital and there's no audio). The question is which clpi (or other file) should I look to modify - the original with the wrong offset or the new one with the wrong audio flag. I have played a bit with bdedit, but can never figure a way of editing the audio streams, and have heard of fixclpi but that doesn't sound quite what I need.

9th April 2009, 21:40	#2452 \| Link
DaMacFunkin Registered User Join Date: Mar 2002 Posts: 140	Twilight Region B doesn't work, replaced tsmuxer with new one so i can keep HD audio (5.1 dts-hd master audio) Summary of problem , disk boots fine, plays studio logos and trailers, goes to main menu - any attempt to play film either from play movie command or scene selection results in play looping back to main menu... any attempt to play extras results in audio, but no video My reults are on panasonic BD30, i am no longer using fixclpi=0 since this was apparently fixed. If you need any more details please let me know what. p.s. if you count a lot of universal titles there is a mounting list of films that this program doesn't work with....

10th April 2009, 04:23	#2455 \| Link
GaPony Registered User Join Date: Dec 2008 Location: Georgia, USA Posts: 496	It could have been an AnyDVD issue. There have been several beta releases over the past 24hrs. The current version is beta 6.5.3.9.

10th April 2009, 11:05	#2457 \| Link
turbojet Registered User Join Date: May 2008 Posts: 1,840	If you already had some success with tsmuxer 1.8.35+ then it won't be that, it's just that the bluray output changed dramatically with these new versions and I haven't seen one report of a player that's working with it. 1.8.30 works fine with HD audio unless you have DTS MA and popcorn hour or tvix player.

10th April 2009, 11:33	#2458 \| Link
colinhunt Registered User Join Date: Dec 2002 Posts: 1,022	Did South Park S12 D3 last night. Original disc is 26.6 GB and Full Backup turned out to be only 21.4 GB. So while the backup is undersized, it seems to be working perfectly, TrueHD audio and all. Used RB v0.20.05 with tsmuxer 1.9.1(b).