BD Rebuilder Beta - Bug Reports Only - Page 112

jdobbs · 29th March 2009, 23:59

Understood.

drmih · 30th March 2009, 00:11

jdobbs

Just a quick one - I've just replaced it with the latest version and am trying to do a restart at the rebuild stage (to see if it may get around the DoRebuild error). However, whereas I could do this with the previous version the new one wants to start from scratch. I have tried the old inf file, and even tried to reproduce all of the settings in a new one but no joy. No great problem, it was just to save a few hours wasted time if it fails.

jdobbs · 30th March 2009, 01:00

I can't think of any changes made that would cause it to not recognize the same parameters... if the previous version would resume, this one should too.

tyau · 30th March 2009, 03:04

- Added an option to SETUP to keep HD audio streams
intact (for BD25 encoding only).

This is an awesome feature. Not just for BD-25 recording, but also great for people who want to store a compressed ISO of the BD-25 on their harddrive for backup for viewing on a computer.

Capsbackup · 30th March 2009, 03:29

@jdobbs:
It is good to hear from you, it has been awhile, and thanks for your continued efforts to improve this great software you've developed! I have looked but can't seem to find the way to not reencode certain m2ts files, but to leave them as original and just copy them to the new project. What is the correct wording and location to put this to force BD-RB to not reencode a M2TS file? ( is it something like MIN_M2TS_SIZE...., and just below [Options] in the configuration settings or does it need to be placed in a specific location? ) Does the size of the M2TS files need to be in kb's or mb's? Though I have not needed to use this for any specific backup or file, it would be nice to understand the proper method and procedure just in case.

Jake802 · 30th March 2009, 04:06

Thanks! For another release JDobbs.I'm starting Punisher: War Zone now! Let you know how it goes
Very excited to have HD Audio!

HWK · 30th March 2009, 05:13

@ Jdobbs

It's nice to have you back. Welcome back!

I know somebody already said this but I think keep HD Audio should be greyed out if target size is not BD25. So people won't complain about poor quality on other media size.

Also do you still accept donation via mail.

SilverBlade · 30th March 2009, 05:29

- Added an option to SETUP to keep HD audio streams intact (for BD25 encoding only).

This is a much welcomed feature. I for sure will be getting this program, once BD-R Media and burners become affordable enough.

HWK · 30th March 2009, 07:28

Quote:

[01:37:01] BD Rebuilder v0.20.04 (beta)
- Source: HORTON
- Input BD size: 37.12 GB
- Approximate total content: [02:32:20.814]
- Target BD size: 22.46 GB
[01:37:07] PHASE ONE, Encoding
- [01:37:07] Extracting audio/subs [VID_00013]
- [02:12:23] Collecting video information [00013]
- Video: 1920x1080, 23.976fps
- Bitrate: 17,148 Kbs
- [02:12:24] Reencoding: VID_00013, Pass 1 of 2
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
[02:13:24] - Failed video encode, aborted

BD Rebuilder Setup Information

[Status]
LABEL=HORTON
VERSION=v0.20.04 (beta)
SOURCE_SIZE=39856742853
SOURCE_VIDEO_SIZE=38132754432
TARGET_SIZE=24117248000
REDUCTION=.587244743070754
RESIZE_1080=0
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
BACKUP_MODE=0
QUICK=0
ENCODE_STEP=1
[00013]
AUDIO=1111
PGS=1111111
M2TS_TARGET=15620551112
RATE=17148

LASTCMD

"D:\Documents and Settings\----\My Documents\BD-RBV02004\BD_Rebuilder\tools\x264.exe" "X:\HORTON\WORKFILES\VID_00013.AVS" --bitrate 17148 --level 4.1 --sar 1:1 --aud --vbv-bufsize 25000 --keyint 24 --min-keyint 1 --vbv-maxrate 35000 --filter 0,0 --subme 0 --me dia --bframes 3 --direct auto --weightb --partitions none --trellis 0 --analyse none --threads auto --thread-input --progress --no-psnr --no-ssim --stats "X:\HORTON\WORKFILES\VID_00013.AVS.264.stats" --pass 1 --output NUL

BD Rebuilder Option

[Options]
MODE=0
QUICK_EXTRAS=0
PRIORITY_CLASS=1
RESIZE=0
TARGET_SIZE=23000
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
TRELLIS=0
COLOR_BOOST=0
RESIZE_1080=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=0
KEEP_HD_AUDIO=1
AVCHD=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23450
ENCODE_QUALITY=0
VERBOSE_STATUS=1
[Paths]
SOURCE_PATH=F:\
WORKING_PATH=X:\HORTON\
------------------------------
Also if option to encode extras is set to quick, it fails to encode video as well. As usual setting is same for the rest of it.
------------------------------

It fails on pass 1 of encoding. I can play "VID_00013.AVS" file in Windows Media Player and Nero Show time. Which doesn't have any sound but video plays fine. Also Anydvd is using it's default setting.

It is new project. In other words no resume from old one.

Let me know if you need something else related to it.

HWK · 30th March 2009, 07:51

I was using same setting as above post. This time movie only.

I got this.

[02:49:01] BD Rebuilder v0.20.04 (beta)
- Source: HORTON
- Input BD size: 24.77 GB
- Approximate total content: [01:26:10.456]
- Target BD size: 22.46 GB
- MOVIE-ONLY mode enabled
[02:49:03] PHASE ONE, Encoding
- [02:49:03] Extracting audio/subs [VID_00013]
- Error in attempt to extract audio/subs.
[02:49:04] - Failed to retrieve audio, aborted

robinthehood · 30th March 2009, 08:22

@Shuttle99, Thank You

,

Quote:

Had the same error and found a work around that worked for me had a few others do the same error. This is what I did and has worked 100% on all that gave me that error.
When I open the folder in BD Rebuilder I noticed there is an extra video file showing up under the audio so what ever file it was for eg 0002 I moved the file to another folder temporarily and told BD Rebuilder to open the folder again and now that extra file is not there, now click backup and you will get an erro "to be expected" in the BD log on the screen. Move that file back to where it came from and do not rescan the folder again and just click backup again and let it go. I've done this on about 5 so far and all work great. Not sure why it has worked but it has.

Not sure how you came up with that but it worked for me on Blindness will have a go with Leon later tonight

jdobbs · 30th March 2009, 11:46

Quote:

Originally Posted by HWK

@ Jdobbs

It's nice to have you back. Welcome back!

I know somebody already said this but I think keep HD Audio should be greyed out if target size is not BD25. So people won't complain about poor quality on other media size.

Also do you still accept donation via mail.

It won't give them poor quality on other targets, because it will be ignored.

liquidskin76 · 30th March 2009, 12:11

Quote:

Originally Posted by jdobbs

Added an option to SETUP to keep HD audio streams intact (for BD25 encoding only).[/code]

Great stuff. Can't wait to test.

Does this also include uncompressed LPCM, or is just TrueHD and DTS-HD MA?

Thanks

HALL9000 · 30th March 2009, 13:45

VERBATIM, MEMOREX, TDK, MAXELL BD-R 25 GB
Free Space: 25 025 314 816 bytes

BD-RE have less capacity, but this can be fix :
Start Imgburn -> Tools -> Settings -> "Write tab" -> "Prefer format without spare areas"

BlackJack1 · 30th March 2009, 14:05

BD-RE 24 220 008 448 bytes
BD-R 25 025 314 816 bytes

and my concert 25 074 234 720 bytes

Can I fit it on BD-R any way...?

jdobbs · 30th March 2009, 14:44

Quote:

Originally Posted by liquidskin76

Great stuff. Can't wait to test.

Does this also include uncompressed LPCM, or is just TrueHD and DTS-HD MA?

Thanks

Any limitations would be those associated with TSMUXER. So if you follow those rules/limitations you should be ok. I have tried the new version of BD-RB with TSMUXER v1.8.4 thru v1.8.35 and they all work correctly. Please note, though, that only v1.8.4 has been extensively tested against multiple sources.

jdobbs · 30th March 2009, 14:46

Quote:

Originally Posted by BlackJack1

BD-RE 24 220 008 448 bytes
BD-R 25 025 314 816 bytes

and my concert 25 074 234 720 bytes

Can I fit it on BD-R any way...?

I lowered the default output target size for BD-25 for that very reason on the most recent release. BD-RE is smaller than BD-R. Are you using a specified target size, or did you get that size from one of the defaults?

I wouldn't count on a good write with a source that is larger than the target disc. You could replace one of the audio streams with a smaller one (after some manual processing) and rebuild to a smaller size.

wiggle · 30th March 2009, 15:51

Question.. why is --vbv-maxrate 35000 used by BD Rebuilder? Seems kinda weird/useless/unnecessary to have a bitrate peak limit.

klas · 30th March 2009, 15:55

Quote:

Originally Posted by jdobbs

Any limitations would be those associated with TSMUXER. So if you follow those rules/limitations you should be ok. I have tried the new version of BD-RB with TSMUXER v1.8.4 thru v1.8.35 and they all work correctly. Please note, though, that only v1.8.4 has been extensively tested against multiple sources.

With Arcsoft Totalmedia Theatre 3 Platinum Dolby Tru-HD does not sound if the remux I was done with tsmuxer 1.8.4 and it if heard with 1.8.35.

Furiousflea · 30th March 2009, 15:56

Quote:

Originally Posted by wiggle

Question.. why is --vbv-maxrate 35000 used by BD Rebuilder? Seems kinda weird/useless/unnecessary to have a bitrate peak limit.

Because the Bluray video standard has a peak limit....

29th March 2009, 23:59	#2221 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	Understood. __________________ Help with development of new apps: Donations. Website: www.jdobbs.net

30th March 2009, 01:00	#2223 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	I can't think of any changes made that would cause it to not recognize the same parameters... if the previous version would resume, this one should too. __________________ Help with development of new apps: Donations. Website: www.jdobbs.net

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30th March 2009, 00:11	#2222 \| Link
drmih Registered User Join Date: Apr 2002 Posts: 590	jdobbs Just a quick one - I've just replaced it with the latest version and am trying to do a restart at the rebuild stage (to see if it may get around the DoRebuild error). However, whereas I could do this with the previous version the new one wants to start from scratch. I have tried the old inf file, and even tried to reproduce all of the settings in a new one but no joy. No great problem, it was just to save a few hours wasted time if it fails.

30th March 2009, 03:04	#2224 \| Link
tyau Registered User Join Date: Jan 2009 Posts: 28	- Added an option to SETUP to keep HD audio streams intact (for BD25 encoding only). This is an awesome feature. Not just for BD-25 recording, but also great for people who want to store a compressed ISO of the BD-25 on their harddrive for backup for viewing on a computer.

30th March 2009, 03:29	#2225 \| Link
Capsbackup Registered User Join Date: Jul 2005 Posts: 1,995	@jdobbs: It is good to hear from you, it has been awhile, and thanks for your continued efforts to improve this great software you've developed! I have looked but can't seem to find the way to not reencode certain m2ts files, but to leave them as original and just copy them to the new project. What is the correct wording and location to put this to force BD-RB to not reencode a M2TS file? ( is it something like MIN_M2TS_SIZE...., and just below [Options] in the configuration settings or does it need to be placed in a specific location? ) Does the size of the M2TS files need to be in kb's or mb's? Though I have not needed to use this for any specific backup or file, it would be nice to understand the proper method and procedure just in case.

30th March 2009, 04:06	#2226 \| Link
Jake802 Registered User Join Date: Mar 2002 Posts: 117	Thanks! For another release JDobbs.I'm starting Punisher: War Zone now! Let you know how it goes Very excited to have HD Audio!

30th March 2009, 05:13	#2227 \| Link
HWK Registered User Join Date: Feb 2009 Location: Toronto, Ontario, Canada Posts: 1,059	@ Jdobbs It's nice to have you back. Welcome back! I know somebody already said this but I think keep HD Audio should be greyed out if target size is not BD25. So people won't complain about poor quality on other media size. Also do you still accept donation via mail.

30th March 2009, 05:29	#2228 \| Link
SilverBlade Registered User Join Date: Dec 2002 Posts: 10	- Added an option to SETUP to keep HD audio streams intact (for BD25 encoding only). This is a much welcomed feature. I for sure will be getting this program, once BD-R Media and burners become affordable enough.

30th March 2009, 07:51	#2230 \| Link
HWK Registered User Join Date: Feb 2009 Location: Toronto, Ontario, Canada Posts: 1,059	I was using same setting as above post. This time movie only. I got this. [02:49:01] BD Rebuilder v0.20.04 (beta) - Source: HORTON - Input BD size: 24.77 GB - Approximate total content: [01:26:10.456] - Target BD size: 22.46 GB - MOVIE-ONLY mode enabled [02:49:03] PHASE ONE, Encoding - [02:49:03] Extracting audio/subs [VID_00013] - Error in attempt to extract audio/subs. [02:49:04] - Failed to retrieve audio, aborted

30th March 2009, 13:45	#2234 \| Link
HALL9000 Registered User Join Date: Feb 2009 Posts: 3	VERBATIM, MEMOREX, TDK, MAXELL BD-R 25 GB Free Space: 25 025 314 816 bytes BD-RE have less capacity, but this can be fix : Start Imgburn -> Tools -> Settings -> "Write tab" -> "Prefer format without spare areas"

30th March 2009, 14:05	#2235 \| Link
BlackJack1 Registered User Join Date: Jan 2008 Posts: 71	BD-RE 24 220 008 448 bytes BD-R 25 025 314 816 bytes and my concert 25 074 234 720 bytes Can I fit it on BD-R any way...?

30th March 2009, 15:51	#2238 \| Link
wiggle Registered User Join Date: Feb 2008 Posts: 43	Question.. why is --vbv-maxrate 35000 used by BD Rebuilder? Seems kinda weird/useless/unnecessary to have a bitrate peak limit.