Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
|
|
Thread Tools | Search this Thread | Display Modes |
4th July 2005, 07:16 | #241 | Link |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
you can't really play the raw streams. But here's my last attempt at trying to convince you that ffdshow is full of shit: plug in "--fps 29.97" into the Custom Command Line options in the More tab of the x264 codec configuration dialog.. that forces 29.97 output. It will not change anything because x264.exe uses the input fps as output fps.. but just so that you can sleep during the night. Or even better: try mp4box on the file.. here's the commandline: mp4box -info your-mp4.mp4. It'll tell you the properties of the streams.
Seriously though this is it for me. If you trust ffdshow over anything else, even common sense (muxing in audio, compare playlength and playback speed of source and encoded material), nobody will take you seriously around here.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
4th July 2005, 12:10 | #243 | Link | |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
Quote:
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
|
4th July 2005, 12:15 | #244 | Link | |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
Quote:
Hope it wont cause problems. EDIT: ehr... megui still doesnt want to read it...
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! Last edited by Sharktooth; 4th July 2005 at 12:41. |
|
4th July 2005, 13:25 | #245 | Link | |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
Quote:
1,2,3,4,5,6,7,8 9,10,11,12, 13, 14, 15, 16 then I separate the string by comma.. so these two lines turn into the following lines (quantizer separated by -) 1-2-3-4-5-6-7-8 9 10-11-12-13-14-15-16 and in the end I don't have all the 64 values as the value at the end of a line and the first of the subsequent value are combined.. and "8 9" cannot be parsed into an int directly. So quant = Int32.Parse("8 9"); throws an exception, which in turn leads to the "invalid quant" error message.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
|
4th July 2005, 13:59 | #246 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
...going to buy a pair of googles...
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
5th July 2005, 19:18 | #247 | Link |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
I see that you've added the trailing comma. If you encounter any problem with my matrix editor please let me know.. I don't think it's a widely used feature and I may not have tested it enough.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
5th July 2005, 23:31 | #248 | Link |
Registered User
Join Date: Jun 2005
Posts: 4
|
I'm trying to use MyGUI but I'm running into an error at a very basic level. I'm trying to open an avs file but get the AVIStreamGetFrameOpen failed error. The same avs file opens fine in both virtual dub 1.6.8 and wmp. Video file in question is using HFYU codec at 640x480. Script posted below.
# Created by AVSEdit # Admin 6/14/2005 AVISource("c:\quake3sh.avi") |
6th July 2005, 11:52 | #249 | Link |
Registered User
Join Date: Apr 2005
Posts: 1,740
|
Hello Sputnik776. Welcome to this forum.
I was able to reproduce your error after a bit of testing. While VirtualDub will not throw an error when opening an avs file without a YV12 decoder, VirtualDubMod will, and MeGUI will throw the AVIStreamGetFrameOpen error for the same reason. Try installing a YV12 decoder (ffdshow, and set Raw Video decoding to All supported in the VFW codec configuration; XviD should also work). Last edited by berrinam; 6th July 2005 at 11:56. |
6th July 2005, 14:11 | #250 | Link | |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
Quote:
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
|
6th July 2005, 16:05 | #251 | Link |
Registered User
Join Date: Jun 2005
Location: Russia/Spb
Posts: 7
|
hello, i have the problems:
1) i cant use 1st pass cording x264 with mencoder: fps -1, time 0 Next job job4-1 is a video job. encoder commandline: "E:\My things\Prog\meGUI\tool\mencoder.exe" "E:\vid\tg.avs" -ovc x264 -o NUL: -passlogfile "2pass.log" -x264encopts pass=1:bitrate=700:bframes=1:b_adapt:subq=1:no8x8mv:nob8x8mv:me=0 successfully set up video encoder and callbacks for job job4-1 ---------------------------------------------------------------------------------------------------------- Log for job job4-1 ---------------------------------------------------------------------------------------------------------- job job4-1 has been processed. This job is linked to the next job: job4-2 Next job job4-2 is a video job. encoder commandline: "E:\My things\Prog\meGUI\tool\mencoder.exe" "E:\vid\tg.avs" -ovc x264 -passlogfile "2pass.log" -x264encopts pass=2:bitrate=700:bframes=1:b_adapt:i4x4 -o "E:\vid\gh\ged.264" -of rawvideo successfully set up video encoder and callbacks for job job4-2 --------------------------------------------------------------------------------------------------------- Log for job job4-2 ---------------------------------------------------------------------------------------------------------- The current job was aborted. Stopping queue mode 2) if i use B frames (when i don`t use b frames - all is O.K.) in AVC with mencoder i have file 0 kb: Log for job job4-1 ---------------------------------------------------------------------------------------------------------- job job4-1 has been processed. This job is linked to the next job: job4-2 Next job job4-2 is a video job. encoder commandline: "E:\My things\Prog\meGUI\tool\mencoder.exe" "E:\vid\tg.avs" -ovc lavc -passlogfile "2pass.log" -lavcopts vpass=2:vbitrate=700:vmax_b_frames=2:vb_strategy=1:qpel:vqdiff=2:trell -o "E:\vid\gh\ged.m4v" -of rawvideo successfully set up video encoder and callbacks for job job4-2 ---------------------------------------------------------------------------------------------------------- Log for job job4-2 [mpeg4 @ 00A9C848]b_frame_strategy must be 0 on the second passCould not open codec. FATAL: Cannot initialize video driver. Cannot find codec matching selected -vo and video format 0x32315659. desired video bitrate of this job: 700 kbit/s - obtained video bitrate: 0 kbit/s ---------------------------------------------------------------------------------------------------------- job job4-2 has been processed. This job is linked to the next job: job4-3 Next job job4-3 is a mux job. mp4box commandline: "E:\My things\Prog\meGUI\tool\MP4Box.exe" -add "E:\vid\gh\ged.m4v" -fps 25 -new "E:\vid\gh\ged.mp4" successfully set up muxer and callbacks for job job4-3 ---------------------------------------------------------------------------------------------------------- Log for job job4-3 an exception ocurred when trying to read from stdout: Could not find file "E:\vid\gh\ged.mp4". ---------------------------------------------------------------------------------------------------------- |
6th July 2005, 16:22 | #252 | Link | |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
Let's start with number two: I see you're using the b-frame reduction mode, and the 2nd pass error message tells me all I need to know.
Looking at the mencoder manpage I found this: Quote:
As for your first problem, I had to consult the manpage again but I'm afraid that's my fault, too. The me=0 option is the culprit.. mencoder uses me=1-4 I guess the error message in both cases would be there, but doesn't have either the word error or anything else I identify as an error in it.. otherwise MeGUI should halt immediately and not start subsequent jobs.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
|
6th July 2005, 17:54 | #254 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
x264 CLI (coz it's smaller and is usually more up to date - also, less code, less bugs...) and it already comes with SSE/SSE2. The MMX suffix is there to warn ppl it REQUIRES AT LEAST MMX to work.
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! Last edited by Sharktooth; 6th July 2005 at 18:12. |
6th July 2005, 17:55 | #255 | Link | |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
Quote:
But I'm glad you're using mencoder.. you discovered two bugs.. not good for me but good for all the other users.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
|
6th July 2005, 20:27 | #257 | Link |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
Alright, before I unleash the one click mode upon the world here's the list of caveats for the upcoming release:
You will need to create a profile for the audio and video codec you're going to use. Set AR to Auto Detect in the one click window or make sure you select the proper one manually. DVDs with MPEG audio might cause problems.. if you have one, please get me the stream info file. The same applies to LPCM tracks. AVI output in the one click window has NOT!! been tested. Trying to use it might make your head explode. The language selection seems to suffer from the fact that depending on where you bought a DVD, the language might be indicated using the native name (like Français), or the English name. Currently, MeGUI only supports English names. Whether or not it will be possible to support both is currently under investigation. I moved around a LOT!! of tested code which inevitably might lead to problems. It is therefore crucial that those who try the one click mode and run into problem, try reproducing the problem using a "lesser" mode. So here's the how to for the various parts: Opening a video source: start the dgindex project creator (control-d), and set it up just like you did set up the job in the one click window DGIndex problem: same as above, try reproducing in the dgindex project creator window DGIndex has run successfully but jobs are not properly created: try the AviSynth project creator (Control-A in the main gui). Open your d2v, check "autocrop", check "suggest resolution", check "on save close and load", then press save. This reproduces the steps that will be taken after running dgindex in the one click window. Problem encoding/muxing: try using the auto mode using the same video and audio profile and the video/audio you got demuxed. Since the code is the same, bugfixing will always be done first in the separate modules (easier scenarios).
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
6th July 2005, 20:57 | #258 | Link |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
alright, the new release is out now.
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
7th July 2005, 04:01 | #259 | Link |
Registered User
Join Date: Jun 2002
Posts: 44
|
Ok... I'm laying myself out for ridicule... but I don't want anyone else to go through the same thing.
I set up my jobs doing an auto encode. Come back in the morning and my mp4 is way oversized. Plus it has no audio. I'm thinking what the hell? Doom9... it might be a good idea to have megui perform a check so the user doesn't name both the video and audio output the same thing hence overwriting one of their jobs in the process. I realize this may be a little redundant and no one else may make my idiotic mistake...but just in case btw love your tool. Keep up the good work. |
7th July 2005, 08:30 | #260 | Link | |
clueless n00b
Join Date: Oct 2001
Location: somewhere over the rainbow
Posts: 10,579
|
Quote:
As for the oversize I would need to see your logfile..
__________________
For the web's most comprehensive collection of DVD backup guides go to www.doom9.org |
|
|
|