BD-Rebuilder - HEVC

[jdobbs]

Originally Posted by HWK

Jdobbs, when intact audio is choosen and container is mkv, does DTS-HD is downconverted to DTS.

Can't remember. I wouldn't think so, but I'll have to check.

[Edit] Ok... it will keep DTS-HD it if you have "Keep HD Audio for BD25 /Alternate Intact" checked in SETUP.

[HWK]

Originally Posted by jdobbs

Can't remember. I wouldn't think so, but I'll have to check.

[Edit] Ok... it will keep DTS-HD it if you have "Keep HD Audio for BD25 /Alternate Intact" checked in SETUP.

Ok, one more thing I was outputting to MKV container with intact audio and video, however BD-RB still encoding it.

Any feed back on why it does that.

[jdobbs]

Originally Posted by HWK

Ok, one more thing I was outputting to MKV container with intact audio and video, however BD-RB still encoding it.

Any feed back on why it does that.

If you select an existing preset for Intact audio/video, it will work. Are you using one of the built in presets, or did you create one?

Also, if the output is selected as x265, Intact Video may not work. But I'd have to test it. That's because it might assumes the source couldn't be HEVC (since that would be illegal for the source BD).

[lauguru]

You may have encoded by a m2ts affecting the bluray menu, first try only encode the m2ts main movie and edit with tsmuxer and create new mpls and m2ts and copy and paste on structure bd and playback with powerdvd 14

[HWK]

Originally Posted by jdobbs

If you select an existing preset for Intact audio/video, it will work. Are you using one of the built in presets, or did you create one?

Also, if the output is selected as x265, Intact Video may not work. But I'd have to test it. That's because it might assumes the source couldn't be HEVC (since that would be illegal for the source BD).

One of the existing preset with source video MPEG-4 AVC

Preset

[00028]
caption=MKV, Intact Video, Intact Audio
aType=2
vFormat=8
cType=1

[HWK]

Originally Posted by lauguru

You may have encoded by a m2ts affecting the bluray menu, first try only encode the m2ts main movie and edit with tsmuxer and create new mpls and m2ts and copy and paste on structure bd and playback with powerdvd 14

Doesn't work. I created blu-ray structure with tsmuxer for movie only, which I encoded with HEVC.

[jdobbs]

Originally Posted by HWK

One of the existing preset with source video MPEG-4 AVC

Preset

I just tested it and it works fine with AVC here. It fails with HEVC source, though (as I'd expect).

[HWK]

Also Jdobbs, there is bug in file output name and need fixing.

I am working with CAPT_AMERICA_WINTER_SOLDIER_3D and have chosen alternate output with two pass encode and encoding with X265.

X265 batch file contents Pass 1

"E:\BD-RBV04901\BD_Rebuilder\tools\avs2yuv.exe" "F:\BD-RB\WORKFILES\VID_00800.AVS" -o - | "E:\BD-RBV04901\BD_Rebuilder\tools\x265.exe" - --preset slow --qpfile "F:\BD-RB\WORKFILES\VID_00800.CHP" --keyint 240 --bitrate 9839 --y4m --stats "F:\BD-RB\WORKFILES\VID_00800.AVS.264.stats" --pass 1 --output NUL

X265 batch file contents Pass 2

"E:\BD-RBV04901\BD_Rebuilder\tools\avs2yuv.exe" "F:\BD-RB\WORKFILES\VID_00800.AVS" -o - | "E:\BD-RBV04901\BD_Rebuilder\tools\x265.exe" - --preset slow --qpfile "F:\BD-RB\WORKFILES\VID_00800.CHP" --keyint 240 --bitrate 9839 --y4m --stats "F:\BD-RB\WORKFILES\VID_00800.AVS.264.stats" --pass 2 --output "F:\BD-RB\WORKFILES\VID_00800.AVS.264"

You mention you did lot of sources and it didn't happen, but never tried 3D source and this is 3D source.

[HWK]

Originally Posted by jdobbs

I just tested it and it works fine with AVC here. It fails with HEVC source, though (as I'd expect).

Are you testing with 3D source or 2D? All I know I have MKV intact video and audio and source is 3D and BD-RB still want to encode it.

[HWK]

Jdobbs, I notice if you are outputting to MKV and using hevc. If encoder is doing second pass and user abort and restart it want to start from creating stats file and doing two pass on video again.

[jdobbs]

Originally Posted by HWK

Also Jdobbs, there is bug in file output name and need fixing.

I am working with CAPT_AMERICA_WINTER_SOLDIER_3D and have chosen alternate output with two pass encode and encoding with X265.

X265 batch file contents Pass 1


X265 batch file contents Pass 2


You mention you did lot of sources and it didn't happen, but never tried 3D source and this is 3D source.

Can you post the log? I've done 3D since then and am having no issues. I'm doing one right now to test it again.

[jdobbs]

Are you sure you're looking at the right .BAT files? I don't think so. Here's the second pass of a 3D SBS encode:

"D:\BD_Rebuilder\tools\avs2yuv.exe" "D:\WORKING8\WORKFILES\VID_00000.AVS" -o - | "D:\BD_Rebuilder\tools\x265.exe" - --preset medium --keyint 240 --bitrate 2000 --y4m --stats "D:\WORKING8\WORKFILES\VID_00000.AVS.hevc.stats" --pass 2 --output "D:\WORKING8\WORKFILES\VID_00000.AVS.hevc"

[HWK]

Originally Posted by jdobbs

Are you sure you're looking at the right .BAT files? I don't think so. Here's the second pass of a 3D SBS encode:

You are doing "two pass bitrate encoding" and if I choose that mine works as expected and it is fine. However If "two pass target size" is chosen then it does what I describe and try with that and see if you can repeat it.

Here are my bdrebuilder.ini file setting

[Options]
VERSION=0.49.0.1
ENCODER=0
MODE=3
ENCODE_QUALITY=3
ONEPASS_ENCODING=0
AUTO_QUALITY=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
DECODER=3
AVCHD=1
REMOVE_WORKFILES=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
MOVIEONLY_TYPE=37
ALTCRF=10
ALT_TARGET=10240
ALTMETHOD=2
ALTAUTOCROP=0
MINIMIZE_TO_TRAY=1
[Paths]
SOURCE_PATH=J:\
NeroAACPath=E:\BD-RBV04901\NeroAACCodec-1.5.1\win32\neroAacEnc.exe
DGIndexNV=E:\BD-RBV04901\dgdecnv2048\DGIndexNV.exe
DGDecNV=E:\BD-RBV04901\dgdecnv2048\DGDecodeNV.dll
WORKING_PATH=F:\BD-RB\

Status File

[Status]
LABEL=CAPT_AMERICA_WINTER_SOLDIER_3D
VERSION=v0.49.01 (beta)
SOURCE_SIZE=45153570816
SOURCE_VIDEO_SIZE=45153570816
TARGET_SIZE=4686086144
REDUCTION=.103781075545403
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=eng;
BACKUP_MODE=1
MOVIEONLY_TYPE=37
USE_LAVF=0
INSTANCES=1
DGDECNV=-1
DGDECIM=0
FRIMSOURCE=0
FFMS2=0
SSIF_MODE=-1
QUICK=0
ENCODE_STEP=1.5
[00800]
AUDIO=1000
PGS=10000001000
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=4686086144

[jdobbs]

Originally Posted by HWK

You are doing "two pass bitrate encoding" and if I choose that mine works as expected and it is fine. However If "two pass target size" is chosen then it does what I describe and try with that and see if you can repeat it.

Here are my bdrebuilder.ini file setting



Status File

You're right. The two-pass target setting was wrong. I've fixed it for the next release.

[lauguru]

jdobbs for create MKV Container, HEVC Intact Video, Intact Audio. This is correct?and as applied in alternate.txt?

[00037]
caption=MKV Container, HEVC 1980x1080, Intact Video, Intact Audio
vEncoder=1
aType=2
vFormat=8
cType=1

[HWK]

Originally Posted by lauguru

jdobbs for create MKV Container, HEVC Intact Video, Intact Audio. This is correct?and as applied in alternate.txt?

[00037]
caption=MKV Container, HEVC 1980x1080, Intact Video, Intact Audio
vEncoder=1
aType=2
vFormat=8
cType=1

HEVC Intact Video? I don't think it is even possible.

[lauguru]

i try , and m2ts to convert is mpeg2 is 720x576 use vFormat= 6= 720x480/576, or 7= No Resizing ?

[00037]
caption=MKV Container, HEVC 1920x1080, Intact Audio
vEncoder=1
vBitrate=2000
vKeyint=Auto
aType=2
vFormat=5
cType=1

[HWK]

Originally Posted by lauguru

i try , and m2ts to convert is mpeg2 is 720x576 use vFormat= 6= 720x480/576, or 7= No Resizing ?

[00037]
caption=MKV Container, HEVC 1920x1080, Intact Audio
vEncoder=1
vBitrate=2000
vKeyint=Auto
aType=2
vFormat=5
cType=1

Change V format to 6 and might want to rename caption=MKV Container, HEVC 720x480/576, Intact Audio

[lauguru]

ok thanks HWK, I try