RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 67

arrarro · 7th May 2008, 18:36

I have a problem with v.1.9.3, when I select any of my divx tv episodes to convert them into mp4 (iphone ipod profile) the audio string is void and the audio profile string says: "0.0 NO AUDIO". I tried to convert a file anyway and as I suspected there was no audio.
Reverted back to 1.9.2 and everything is fine. I just noticed the same thing happens with ripbot 1.9.3 to all my divx files (movies and tv episodes), while it happens on 1.9.2 only with Divx with Ac3 audio.
Is this a pc related problem or ripbot problem?
my rig:
win xp pro Sp3
Asus P5Wdh Dlx
E6600 @ 3,2Ghz
4Gb Ram
8800 GT 512Mb
2x 500Gb HDD and so on

Atak_Snajpera · 7th May 2008, 22:22

arrarro try new version

jamd1 · 7th May 2008, 22:23

Quote:

Originally Posted by arrarro

I have a problem with v.1.9.3, when I select any of my divx tv episodes to convert them into mp4 (iphone ipod profile) the audio string is void and the audio profile string says: "0.0 NO AUDIO". I tried to convert a file anyway and as I suspected there was no audio.
Reverted back to 1.9.2 and everything is fine. I just noticed the same thing happens with ripbot 1.9.3 to all my divx files (movies and tv episodes), while it happens on 1.9.2 only with Divx with Ac3 audio.
Is this a pc related problem or ripbot problem?
my rig:
win xp pro Sp3
Asus P5Wdh Dlx
E6600 @ 3,2Ghz
4Gb Ram
8800 GT 512Mb
2x 500Gb HDD and so on

I see you just installed SP3 - expect many problems ;-)

BlackSharkfr · 7th May 2008, 23:24

hi,
i just tested your app for the first time, 1.9.3 simple extract from 7z file

i'm a Megui user but i'm looking for a good powerful Gui but simple enough so i can recommand it to other people.

ripbot looks great.
i just opened one of my hdv clips, applied deinterlace, film denoise and encoded (2 pass).
the preview looked great but the encode failed during the 2nd pass (but doesn't report the error)

i looked at the log, it says this :
x264 [error]: failed to rename "C:\Temp\RipBot264temp\job1\job1.stats.temp" to "C:\Temp\RipBot264temp\job1\job1.stats"

Could it be because my default temp folder is located on an other drive ?

Later i installed the 1.9.2 version from installer and it worked (without the denoiser, obviously)

i also didn't find the way to tell ripbot that i wanted my output to be anamorphic (hdv is 1440x1080i anamorphic 16:9, i'd like to keep the ratio without resizing)

i hope the feedback helps making your little software better

Atak_Snajpera · 7th May 2008, 23:40

Quote:

i looked at the log, it says this :
x264 [error]: failed to rename "C:\Temp\RipBot264temp\job1\job1.stats.temp" to "C:\Temp\RipBot264temp\job1\job1.stats"

Most likely it is problem with the latest x264 encoder

arrarro · 7th May 2008, 23:43

Quote:

Originally Posted by Atak_Snajpera

arrarro try new version

I gave it a try and I did different tests. there is still something not working properly, I think.
Now the audio section of most of my divx movies and tv episodes is correctly processed but it takes a loooooot of time (well at least compared to previous ripbot versions!). After adding a divx file ripbot says: PLEASE WAIT DEMUXING AUDIO STREAMS... This takes about 30 seconds to complete sometimes and in some cases it does not complete at all and after a long wait a warning window tells me:

FILE COULD NOT BE OPENED! (C:\Temp\Ripbot264temp\job1\getinfo.avs, line 4).

The same divx file opened with ripbot 264 v1.9.2 works like a charm and audio is processed very quickly.

hope this helps and thank you for your efforts and patience

Atak_Snajpera · 8th May 2008, 00:03

Quote:

Now the audio section of most of my divx movies and tv episodes is correctly processed but it takes a loooooot of time (well at least compared to previous ripbot versions!).

In previous version only AC3 audio was demuxed from avi. I had few avis with mp3 where audio duration was not reported correctly so therefore I decided to always demux audio.
h264tsto didn't work well , mp4box didn't work either. Let's try with ffmpeg

Ajax_Undone · 8th May 2008, 02:10

***Installer updated***

Glorioso · 8th May 2008, 18:44

Atak, greap app, i have been ausent from RipBot and testing tsMuxer but in here i have all the things i need, well, almost!

Two questions:
Can i limit the output size of the BluRay image?
Can it split the m2ts in 4gb chunks for FAT32?

THX

deets · 9th May 2008, 02:35

im getting a floating point error on mkv using xp sp3? avi seem to convert ok

BlackSharkfr · 9th May 2008, 11:47

ok i tested again with 1.9.4 (from installer, overwritten in the same folder) i used the same source (hdv file).

It seems like the denoise filter doesn't work well during the encoding process :

with filters : deinterlace and old film denoise
result : only 1 image was encoded (the 1st one) and copied over all images. The video is just a single picture with a sound track.

tried again with only deinterlace (denoise off)
the video is correctly encoded.

iNT · 9th May 2008, 18:05

I've been having problems with MeGUI & AVCHD. So i'm moving onto RipBot264.

But i'm running into some problems!

I get this error as soon as i run RipBot264

I tried feeding RipBot264 the .m2ts file, but it just crashes for me.

Then i tried feeding it this .avs script:

Code:

DirectShowSource("F:\BluRay\BDMV\STREAM\00000.m2ts",fps=23.9760431376968,audio=false)
trim(69847,70447)
crop( 2, 132, -2, -134)
Lanczos4Resize(1280,544)

And i get this message:

I even tried feeding a mpeg-2 vob file, and it still gave me the "floating error"

~bT~ · 9th May 2008, 19:18

Quote:

Originally Posted by BlackSharkfr

ok i tested again with 1.9.4 (from installer, overwritten in the same folder) i used the same source (hdv file).

It seems like the denoise filter doesn't work well during the encoding process :

with filters : deinterlace and old film denoise
result : only 1 image was encoded (the 1st one) and copied over all images. The video is just a single picture with a sound track.

tried again with only deinterlace (denoise off)
the video is correctly encoded.

i feel none of this denoise stuff shudv been added to this wonderfully simple prog.
most noobs ain't got a clue and most advanced users can edit the .avs file by hand.

i am also getting errors with certain input files using v1.9.4.
cant extract audio (ac3@384), and same m2ts (mpeg2) error as above.

mpiper · 9th May 2008, 19:19

Here are two thing I'd like to request in the next version:
1. Prestige matrix (for grainy sources)
2. OGM-enabled x264 (with option to turn on or off)

Also, has anyone else been having trouble with 1.9.4 hanging during encode?

Atak_Snajpera · 9th May 2008, 22:40

Quote:

im getting a floating point error on mkv using xp sp3? avi seem to convert ok

More info please. I'm not a fortune teller. Screenshots and so on! Do you use . or , as decimal symbol in windows?

Quote:

It seems like the denoise filter doesn't work well during the encoding process :

What is your graphic card? I have R1950 and everything works well. HDV source and so on.

Quote:

i feel none of this denoise stuff shudv been added to this wonderfully simple prog.

Denoiser should be only used with old noisy source. (see screenshots) It helps alot to lower bitrate in CQ mode. Anime clip without denoising had almost two times higher bitrate @ CRF22 and looked worse.

Quote:

i am also getting errors with certain input files using v1.9.4.
cant extract audio (ac3@384), and same m2ts (mpeg2) error as above.

Sample please!

survivant001 · 9th May 2008, 23:53

is it possible to put in ripbot.ini the default codec to use for the audio in tha avs ?

I still have problem with some release that contains ac3 2ch. I'll like to use bassaudio by default.

what do you think ?

deets · 10th May 2008, 00:26

as to my floating point issue, i have included a screen cap. im in england so we do use the . as a decimal point

http://img151.imageshack.us/my.php?i...board01tt7.jpg

Atak_Snajpera · 10th May 2008, 00:45

deets will you be able to send me small sample of that mkv?

mpiper · 10th May 2008, 16:26

Atak,

version 1.9.2 could accept .sup subtitle files. These are the source / raw subtitle files on HD-DVDs. The newest version 1.9.4 only accepts .srt files. Can you bring back the .sup feature?

Also, New Features I would like to see in 1.9.5:
Custo

Custom/ import Chapter List - like the .txt file created by eac3to.exe
Allow custom matrix - esp. prestige for very grainy/old sources where keeping grain is desired
Include FGO - The newest modified x264 builds seem to be including a Film Grain Optimization feature. Increases compression, while preventing banding.

m/

The Prestige and FGO are suggestions based on this thread:
http://forum.doom9.org/showthread.php?t=137117
I normally like to clean up grain, especially since the smoother the image, the better the compression will be, allowing more detail for the same file size. However, on the 5th page, there is an example of a 17Mbps source (300) with a 13Mbps copy, and a 9Mbps copy. The 9Mbps copy used Prestige and FGO, and resulted in a copy that fit on a DVD9 and still maintained the origional look of the film.

Honestly, the biggest request I have is for the chapter import, using the chapter list created by eac3to.exe.
Please!

Please!!!!!

Atak_Snajpera · 10th May 2008, 17:05

Quote:

Honestly, the biggest request I have is for the chapter import, using the chapter list created by eac3to.exe.

I need samples which contain chapters inside. Send me few and I will try to implement that.

7th May 2008, 18:36	#1321 \| Link
arrarro Registered User Join Date: Jan 2008 Posts: 8	I have a problem with v.1.9.3, when I select any of my divx tv episodes to convert them into mp4 (iphone ipod profile) the audio string is void and the audio profile string says: "0.0 NO AUDIO". I tried to convert a file anyway and as I suspected there was no audio. Reverted back to 1.9.2 and everything is fine. I just noticed the same thing happens with ripbot 1.9.3 to all my divx files (movies and tv episodes), while it happens on 1.9.2 only with Divx with Ac3 audio. Is this a pc related problem or ripbot problem? my rig: win xp pro Sp3 Asus P5Wdh Dlx E6600 @ 3,2Ghz 4Gb Ram 8800 GT 512Mb 2x 500Gb HDD and so on Last edited by arrarro; 7th May 2008 at 18:52.

7th May 2008, 22:22	#1322 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,816	arrarro try new version __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

7th May 2008, 23:24	#1324 \| Link
BlackSharkfr Registered User Join Date: Dec 2005 Posts: 133	hi, i just tested your app for the first time, 1.9.3 simple extract from 7z file i'm a Megui user but i'm looking for a good powerful Gui but simple enough so i can recommand it to other people. ripbot looks great. i just opened one of my hdv clips, applied deinterlace, film denoise and encoded (2 pass). the preview looked great but the encode failed during the 2nd pass (but doesn't report the error) i looked at the log, it says this : x264 [error]: failed to rename "C:\Temp\RipBot264temp\job1\job1.stats.temp" to "C:\Temp\RipBot264temp\job1\job1.stats" Could it be because my default temp folder is located on an other drive ? Later i installed the 1.9.2 version from installer and it worked (without the denoiser, obviously) i also didn't find the way to tell ripbot that i wanted my output to be anamorphic (hdv is 1440x1080i anamorphic 16:9, i'd like to keep the ratio without resizing) i hope the feedback helps making your little software better Last edited by BlackSharkfr; 7th May 2008 at 23:29.

8th May 2008, 02:10	#1328 \| Link
Ajax_Undone I dont care so should you Join Date: Apr 2006 Location: In hell next to the boiling pit of Lava... Posts: 989	*Installer updated* __________________ My Installer's \|\|

9th May 2008, 18:05	#1332 \| Link
iNT Registered User Join Date: Feb 2008 Posts: 4	I've been having problems with MeGUI & AVCHD. So i'm moving onto RipBot264. But i'm running into some problems! I get this error as soon as i run RipBot264 I tried feeding RipBot264 the .m2ts file, but it just crashes for me. Then i tried feeding it this .avs script: Code: DirectShowSource("F:\BluRay\BDMV\STREAM\00000.m2ts",fps=23.9760431376968,audio=false) trim(69847,70447) crop( 2, 132, -2, -134) Lanczos4Resize(1280,544) And i get this message: I even tried feeding a mpeg-2 vob file, and it still gave me the "floating error"

8th May 2008, 18:44	#1329 \| Link
Glorioso Registered User Join Date: Jul 2006 Posts: 211	Atak, greap app, i have been ausent from RipBot and testing tsMuxer but in here i have all the things i need, well, almost! Two questions: Can i limit the output size of the BluRay image? Can it split the m2ts in 4gb chunks for FAT32? THX

9th May 2008, 02:35	#1330 \| Link
deets Registered User Join Date: Jan 2005 Location: london, england Posts: 509	im getting a floating point error on mkv using xp sp3? avi seem to convert ok

9th May 2008, 11:47	#1331 \| Link
BlackSharkfr Registered User Join Date: Dec 2005 Posts: 133	ok i tested again with 1.9.4 (from installer, overwritten in the same folder) i used the same source (hdv file). It seems like the denoise filter doesn't work well during the encoding process : with filters : deinterlace and old film denoise result : only 1 image was encoded (the 1st one) and copied over all images. The video is just a single picture with a sound track. tried again with only deinterlace (denoise off) the video is correctly encoded.

9th May 2008, 19:19	#1334 \| Link
mpiper Registered User Join Date: Jan 2005 Posts: 90	Feature Request Here are two thing I'd like to request in the next version: 1. Prestige matrix (for grainy sources) 2. OGM-enabled x264 (with option to turn on or off) Also, has anyone else been having trouble with 1.9.4 hanging during encode?

9th May 2008, 23:53	#1336 \| Link
survivant001 Registered User Join Date: Nov 2007 Posts: 449	is it possible to put in ripbot.ini the default codec to use for the audio in tha avs ? I still have problem with some release that contains ac3 2ch. I'll like to use bassaudio by default. what do you think ?

10th May 2008, 00:26	#1337 \| Link
deets Registered User Join Date: Jan 2005 Location: london, england Posts: 509	as to my floating point issue, i have included a screen cap. im in england so we do use the . as a decimal point http://img151.imageshack.us/my.php?i...board01tt7.jpg

10th May 2008, 00:45	#1338 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,816	deets will you be able to send me small sample of that mkv? __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

10th May 2008, 16:26	#1339 \| Link
mpiper Registered User Join Date: Jan 2005 Posts: 90	New or Reinstated Features? Atak, version 1.9.2 could accept .sup subtitle files. These are the source / raw subtitle files on HD-DVDs. The newest version 1.9.4 only accepts .srt files. Can you bring back the .sup feature? Also, New Features I would like to see in 1.9.5: Custo Custom/ import Chapter List - like the .txt file created by eac3to.exe Allow custom matrix - esp. prestige for very grainy/old sources where keeping grain is desired Include FGO - The newest modified x264 builds seem to be including a Film Grain Optimization feature. Increases compression, while preventing banding. m/ The Prestige and FGO are suggestions based on this thread: http://forum.doom9.org/showthread.php?t=137117 I normally like to clean up grain, especially since the smoother the image, the better the compression will be, allowing more detail for the same file size. However, on the 5th page, there is an example of a 17Mbps source (300) with a 13Mbps copy, and a 9Mbps copy. The 9Mbps copy used Prestige and FGO, and resulted in a copy that fit on a DVD9 and still maintained the origional look of the film. Honestly, the biggest request I have is for the chapter import, using the chapter list created by eac3to.exe. Please! Please!!!!!