RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Atak_Snajpera]

Use nmap to check If ports 1000,2000 and so on are open.

[Pauly Dunne]

Originally Posted by Atak_Snajpera

Use nmap to check If ports 1000,2000 and so on are open.

I will get Nmap, and do what it does, and I will get back to you.

Nevertheless, you must have changed something, in the last update !!!

Update:- got Nmap, don't know what I have to do.....

[ReinerSchweinlin]

Originally Posted by Pauly Dunne

So you're saying that NUMA isn't an advantage, anymore ??

Well, I can´t be sure this is valid for every dual CPU configuration. I switched NUMA off because I can´t get any grafix card to run in my DL380, so I am using the CPU for OPENCL (which is slow, but in some of my cases is better than nothing). This way all of the cores are used for OPENCL Filtering, which gave quite a bosst.
I then tested Encodes without OPENCL usage and encountered the CPU Usage to bee much higher than before when using only one encodingserver. Same time some updates came from RB Update Server - so I can´t be sure what´s exactly the cause of this right now, would have to switch back to NUMA mode and compare. Didn´t have time for that, that´s because I was asking here, if something had changed within x265/RB (after all, maxing out more cores while encoding can be usefull for bigger multicore CPUs as well).

[Pauly Dunne]

Originally Posted by ReinerSchweinlin

Well, I can´t be sure this is valid for every dual CPU configuration. I switched NUMA off because I can´t get any grafix card to run in my DL380, so I am using the CPU for OPENCL (which is slow, but in some of my cases is better than nothing). This way all of the cores are used for OPENCL Filtering, which gave quite a bosst.
I then tested Encodes without OPENCL usage and encountered the CPU Usage to bee much higher than before when using only one encodingserver. Same time some updates came from RB Update Server - so I can´t be sure what´s exactly the cause of this right now, would have to switch back to NUMA mode and compare. Didn´t have time for that, that´s because I was asking here, if something had changed within x265/RB (after all, maxing out more cores while encoding can be usefull for bigger multicore CPUs as well).

OK, aside, have you got the very latest RB update ???

If so, are you have DE problems ??

[Atak_Snajpera]

https://forum.doom9.org/showthread.p...96#post1889796

[Pauly Dunne]

Originally Posted by Atak_Snajpera

https://forum.doom9.org/showthread.p...96#post1889796

OK, did a simple scan on the laptop that has the latest RB on it, and here's the results...

Starting Nmap 7.80 ( https://nmap.org ) at 2019-11-15 00:01

Nmap scan report for DELL-XPS-M1330.gateway (10.0.0.132)

Host is up (0.00s latency).


PORT STATE SERVICE

1000/tcp closed cadlock
2000/tcp closed cisco-sccp
3000/tcp closed ppp
4000/tcp closed remoteanything
5000/tcp closed upnp
6000/tcp closed X11
7000/tcp closed afs3-fileserver
8000/tcp closed http-alt

Nmap done: 1 IP address (1 host up) scanned in 0.78 seconds

So what does this mean ??

I will run some test on the one of my "proper" RB pc's tomorrow.

[Atak_Snajpera]

This is how it should look...

All your ports are closed. Check anti-virus or other anti-malware software.

[Privateer5000]

Same Problem here with DE Mode not working on 2 machines. Used nmap and it says STATE open like in the picture above. Tried it on Win10 1903, just upgraded to 1909 but still nothing happens.

[Pauly Dunne]

Originally Posted by Atak_Snajpera

This is how it should look...

All your ports are closed. Check anti-virus or other anti-malware software.

Only using built in Windows Defender...

But it still MUST be something you've changed !!!!

[Atak_Snajpera]

But it still MUST be something you've changed !!!!

Yes I have added...

if PaulyDunnePC=true then BlockDEmode

[Pauly Dunne]

Originally Posted by Atak_Snajpera

Yes I have added...

if PaulyDunnePC=true then BlockDEmode

Seriously...is that the best you can do !!

Its like beating your head against a wall, why does the previous build work, and the latest one doesn't ??

It's not just me !!!

[Donholio]

Hi, everyone!

I just want to calmly let everyone know that my corporate antivirus found an issue in the waitforprocess.exe file that is downloaded by the updater for RipBot264. The file is hosted here: http://atak-snajpera.5v.pl/ripbot264...ForProcess.zip according to the update.ini file.

This is the entry from Cisco Umbrella:

o Event Type: Executed malware
o Computer: <REDACTED>
o Hostname: <REDACTED>
o IP: <REDACTED>
o Detection: W32.31A417AE41-85.LP.RET.SBX.TG
o File: WaitForProcess.exe
o File path: file:///<REDACTED>RipBot264v1.24.0/tools/WaitForProcess/WaitForProcess.exe
o Detection SHA-256: 31a417ae412e9e64799565f00ff1efbcd665caf2b8433e63af0a9c59653eaaf7
o Application SHA-256: 3685495d051137b1c4efde22c26df0883614b6453b762fa84588da55ed2e7744
o Severity: High
o Timestamp: 2019-11-14 12:26:18 +0000 UTC

The SHA-256 for the application shows very little detection information. When I run the Application SHA through Virustotal's search function, it shows clean. When I run the Detection SHA (the part of the file detected as "malware"), it shows detections by CrowdStrike Falcon, Panda, Microsoft, Trapmine, and Webroot. Anyone can check this themselves by copying the SHA256 values above, logging into VirusTotal, and clicking the Search function.

It looks like the detected malware might be adware-related or part of an SEO inflation scheme. It also looks like there might be a trojan that modifies windows firewall settings.

I want to scan the actual file through VirusTotal, but unfortunately, the application is blocked by Cisco Umbrella. I will test my home machine once I get home, but if the SHA values match, there should be no different information.

I love RipBot264 and want to continue using it. I've updated the update.ini and installed_tools.ini files in the Tools directory and the update.ini file in the Updates directory to set waitforprocess's AllowUpdate value to 0 for now. I'm not sure what the application is used for at this point. I'd be interested to know what I'm breaking by not having it around.

I think what I've found is credible and I feel it would be best to get this information out there ASAP. Please let me know if this is a known issue and a false positive.

Like I said to start, I'm not trying to cause a panic here and I'm a huge fan of the program.

Thanks

-Donholio

[Atak_Snajpera]

WaitForProcess.exe is just a helping tool I wrote to spawn multiple executables and aggregate percentage progresses into single percentage progress (which is then displayed in ripbot264). It is used during indexing and encoding audio. Some anti-viruses are VERY allergic to executables compressed by UPX. ( https://upx.github.io/ )
If you delete WaitForProcess.exe then indexing and audio encoding won't work.


It is obvious that it is false positive detection...
https://www.virustotal.com/gui/file/...aaf7/detection

[byteshare]

Originally Posted by Pauly Dunne

Only using built in Windows Defender...
But it still MUST be something you've changed !!!!

Do you have exceptions for the RB folder and temp folders?

Originally Posted by Privateer5000

Same Problem here with DE Mode not working on 2 machines. Used nmap and it says STATE open like in the picture above. Tried it on Win10 1903, just upgraded to 1909 but still nothing happens.

Do you have Windows Defender with exceptions for RB and Temp Folder?
Does an older version work for you like Pauly?

On Core 2019.11.08 and Encoding Server 1.16.0.0 I have RB working in DE mode with two different Windows 10 computers, both 1903 (one Pro and one Home)

Originally Posted by Atak_Snajpera

Yes I have added...

if PaulyDunnePC=true then BlockDEmode

I found this funny.

[Pauly Dunne]

Originally Posted by byteshare

Do you have exceptions for the RB folder and temp folders?


Do you have Windows Defender with exceptions for RB and Temp Folder?
Does an older version work for you like Pauly?

On Core 2019.11.08 and Encoding Server 1.16.0.0 I have RB working in DE mode with two different Windows 10 computers, both 1903 (one Pro and one Home)


I found this funny.

No, I don't have any exceptions....I've never had to before !!!

Why can't he just say that's he's changed something...

Just a sick IT sense of humour...it wouldn't have worked, anyway..

[Atak_Snajpera]

My last attempt to help you. Create virtual machine and then install fresh win10 1909. See If you can connect to servers within virtual machine. Virtual win10 also works on my pc. If still nothing then i give up.

[byteshare]

Originally Posted by Pauly Dunne

No, I don't have any exceptions....I've never had to before !!!

Why can't he just say that's he's changed something...

Just a sick IT sense of humour...it wouldn't have worked, anyway..

I had to add the exceptions and have had them for a while, so not sure what is causing your issue since your port is open.
RB is working on 4 Win10 machines for me right now after testing the newest version. I have Windows Fire Wall on, but with exceptions for RB and Windows Defender exceptions for RB.

[ReinerSchweinlin]

Originally Posted by Pauly Dunne

OK, aside, have you got the very latest RB update ???

Yes, at least the one from this morning which was the last time RB was started on all machines.

If so, are you have DE problems ??

No. Mixed WIN 10 and WIn 7 PCs, some over VPN, different CPUs/GPUs...

[Pauly Dunne]

Originally Posted by Atak_Snajpera

My last attempt to help you. Create virtual machine and then install fresh win10 1909. See If you can connect to servers within virtual machine. Virtual win10 also works on my pc. If still nothing then i give up.

This is your software, and your update, so you need to help until this is resolved.

Not interested in VM nonsense, I just installed W10 1909 on another pc, left it all default, vanilla settings, installed what RB needs to work, it ask to do the exceptions it needed, loaded a new job, and exactly the same non starting, non connecting behaviour.

So I need some one to tell me exactly what they did, to get this latest build working in DE !!

I still don't understand why a working app, stops working after an update, and the creator of that update can't or won't tell us what he's done, or how to fix it.

I'll ask you again, did you view that screen capture I posted ???

That's what happens, just a lot of little boxes & icons flashing, not doing ANYTHING, no info in the TCP window..it's just dead !!!

So for now, I will just have to run with the previous working build, and turn off auto updates.

[howzz]

i noticed that with the latest update, "gathering information" is once again taking a lonnnnng time. except this time, regardless of choosing Lmash, FFmp2 or GPU makes it any faster. i noticed the update log says the script was updated. just exactly what changed made Gathering Information so much slower now.

i also noticed that it takes forever for the encode to begin now. from the time i click "start", to seeing all the cores loaded, it takes like 2 mins. before it used to be instant.