Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
25th October 2010, 20:30 | #5824 | Link | |
Registered User
Join Date: Oct 2010
Posts: 29
|
Quote:
I use TsMuxer, but when i remove interlace and convert files after muxing video with audio, the capture in file has a weird freeze of few frames and gives not synchronized audio and video. But whilst watching only video, it's good. |
|
25th October 2010, 20:42 | #5825 | Link |
Registered User
Join Date: Aug 2009
Posts: 6
|
Possibly someone can help me out because am running out of ideas.
Last stable MeGUI (or older/experimental it doesn't matter), last x264 (or few versions older), last Haali, encoding from .m2ts to .mkv and this is what I get: http://img87.imageshack.us/img87/9789/bscap0000tt.jpg Every single time. Different .m2ts files/sources. Always the same. Was fine before. I've compressed dozens of BD's with MeGUI and never had this issue. Tried clean reinstall MeGUI, video decoder, splitter, etc. It didn't change anything. Could this be caused by some x264 setting? I always use the same, more or less, regular settings. Nothing too experimental. I don't know what could be causing these artifacts. Can't compress anything with MeGUI anymore. |
25th October 2010, 20:52 | #5826 | Link | |
Registered User
Join Date: Sep 2007
Posts: 5,345
|
Quote:
Just edit the script, it's not that difficult: Directshowsource("video.m2ts") or DSS2("video.m2ts") |
|
25th October 2010, 20:55 | #5827 | Link | |
Registered User
Join Date: Sep 2007
Posts: 5,345
|
Quote:
post your script , settings what playback software? what decoder? are artifacts visible in preview before you encode? |
|
25th October 2010, 20:59 | #5828 | Link |
Registered User
Join Date: Aug 2009
Posts: 6
|
As I said, Haali source (last 2 versions), different decoders (including different versions of ffdshow libav or WMV 9), no playback prbolem (only get this when encoding). Script: the usual. Nothing special about it. No MeGUI preview oartifacts.
Here are the x264 settings (although I tried some other settings also): cabac=1 / ref=6 / deblock=1:0:0 / analyse=0x3:0x113 / me=umh / subme=9 / psy=0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=0 / threads=2 / sliced_threads=0 / nr=0 / decimate=0 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=9500 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00 P.S. I just encoded with x264_dp_ Unrestricted (DXVA) profile (didn't touch a thing, MeGUI 3.5.0., 1649 x264) and encoding is OK. This is obviously caused by some x264 setting. The problem is that I always use the same settings and if this is the encoder/settings problem it feels like something is broken. Last edited by gorca; 25th October 2010 at 21:20. |
26th October 2010, 00:21 | #5829 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
your player/decoder may be outdated and doesnt support certain x264 encoding features.
however, megui 0.3.5.0 is the latest stable version but not the most up to date. since we're in the process of releasing a new stable version i suggest you to get the development version since it's pretty stable (probably more the the stable version you're using) and more up to date (tools included). also update your player, ffdshow AND haali media splitter.
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
27th October 2010, 00:28 | #5833 | Link |
Registered User
Join Date: Aug 2009
Posts: 6
|
Sharktooth, I've clean reinstalled everything (using only the latest meGUI, ffdshow, Haali, etc.) and it didn't change anything. However, I eventually resolved it. It seems that there was something specific with Back to the future (parts I, II, III) BluRay remuxes that I've used as sources. With these sources some x264 settings were not compatible so I got artifacts every time I changed Trellis 1 to 2, for instance. As soon as I used video-only source wrapped in .mkv that has been passed-through eac3to first, encoding artifacts were gone. Can't explain it but happy the issue was only connected to these 3 movies.
Thanks for helping out. |
27th October 2010, 04:30 | #5834 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
glad you found a way to fix it.
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
27th October 2010, 07:01 | #5835 | Link |
German doom9/Gleitz SuMo
Join Date: Oct 2001
Location: Germany, rural Altmark
Posts: 6,753
|
@ blah123:
Also there is FFmpegSource2, which is as independent from the whole DirectShow system and as free of charge as DGAVCDec, supports PAFF as well as MBAFF interlacing, and should be more frame-accurate than DGAVCDec with a replaced libavcodec decoder library (which was the reason why that one got abandoned). The problem is not the demultiplexing, it is the decoding: There are different types (PAFF / MBAFF), and the old libavcodec decoder library used in DGAVCDec only supported MBAFF, but was the last frame-accurate version. DGDecNV uses Nvidia's PureVideo hardware decoder instead, DGAVCDecDI uses DiAVC. |
27th October 2010, 17:14 | #5836 | Link |
Registered User
Join Date: Oct 2010
Posts: 29
|
Ok, thx for support, TsMuxer handles with AVC.
But now I have a problem with audio. Is unsynchronised... I don't know, which delay I should set. tsMuxeR gives "-471", but there is still a little difference between audio and video after muxing... |
31st October 2010, 15:04 | #5838 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
Maybe FLAC. BassAudio is not needed.
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
31st October 2010, 19:39 | #5839 | Link |
Moderator
Join Date: Feb 2005
Location: Spain
Posts: 6,890
|
Maybe only for AAC audio.
DirectShow don't work properly: Code:
[Error] Log -[Information] Versions --[Information] MeGUI Version : 0.3.5.22 --[Information] OS : Windows XP Professional x86 SP3 (5.1.196608.2600) --[Information] Latest .Net Framework installed : unknown --[Information] Avisynth Version : 2.5.8.5 -[Error] Log for job10 (audio, 6p321.m4a -> 6p321.ac3) --[Information] [31/10/2010 19:14:32] Started handling job --[Information] [31/10/2010 19:14:32] Preprocessing --[Information] Avisynth script ---[NoImage] DirectShowSource("D:\Test\6p321.m4a") ---[NoImage] EnsureVBRMP3Sync() ---[NoImage] return last --[Information] Commandline used: -readtoeof 1 -b 640 - "{0}" --[Information] [31/10/2010 19:14:32] Encoding started --[Information] [31/10/2010 19:14:32] Encode thread started --[Information] [31/10/2010 19:14:32] Avisynth script environment opened --[Information] [31/10/2010 19:14:35] Script loaded --[Information] Output Decoder ---[Information] Channels: 8 ---[Information] Bits per sample: 16 ---[Information] Sample rate: 48000 --[Information] Commandline: D:\Programa\megui\tools\aften\aften.exe -readtoeof 1 -b 640 - "D:\Test\6p321.ac3" --[Information] [31/10/2010 19:14:35] Encoder process started --[Error] An error occurred ---[Error] Exception message: Ha terminado la canalización. ---[Error] Stacktrace ----[NoImage] at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) ----[NoImage] at System.IO.FileStream.WriteCore(Byte[] buffer, Int32 offset, Int32 count) ----[NoImage] at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count) ----[NoImage] at MeGUI.AviSynthAudioEncoder.encode() ---[Error] Inner exception: null --[Information] Output from encoder via stderr ---[NoImage] Aften: A/52 audio encoder ---[NoImage] Version SVN ---[NoImage] (c) 2006-2007 Justin Ruggles, Prakash Punnoor, et al. ---[NoImage] input format: Microsoft WAVE Signed 16-bit little-endian 48000 Hz multi-channel ---[NoImage] Unsupported # of channels passed to aften_wav_chmask_to_acmod ---[NoImage] mismatch in channels, acmod, and lfe params --[Information] [31/10/2010 19:14:35] Job completed Without problems using an avs: BassAudioSource("D:\Test\6p321.m4a") Code:
-[Information] Log for job11 (audio, 6p321_m4a.avs -> 6p321_m4a.ac3) --[Information] [31/10/2010 19:30:29] Started handling job --[Information] [31/10/2010 19:30:29] Preprocessing --[Information] Avisynth script ---[NoImage] Import("D:\Test\6p321_m4a.avs") ---[NoImage] return last --[Information] Commandline used: -readtoeof 1 -b 640 - "{0}" --[Information] [31/10/2010 19:30:29] Encoding started --[Information] [31/10/2010 19:30:29] Encode thread started --[Information] [31/10/2010 19:30:29] Avisynth script environment opened --[Information] [31/10/2010 19:30:33] Script loaded --[Information] Output Decoder ---[Information] Channels: 6 ---[Information] Bits per sample: 32 ---[Information] Sample rate: 48000 --[Information] Commandline: D:\Programa\megui\tools\aften\aften.exe -readtoeof 1 -b 640 - "D:\Test\6p321_m4a.ac3" --[Information] [31/10/2010 19:30:33] Encoder process started --[Information] Output from encoder via stderr ---[NoImage] Aften: A/52 audio encoder ---[NoImage] Version SVN ---[NoImage] (c) 2006-2007 Justin Ruggles, Prakash Punnoor, et al. ---[NoImage] input format: Microsoft WAVE Floating-point 32-bit little-endian 48000 Hz 5.1-channel ---[NoImage] output format: 48000 Hz 3/2 + LFE ---[NoImage] SIMD usage: MMX SSE SSE2 SSE3 ---[NoImage] Threads: 2 ---[NoImage] progress: 100% | q: 534.5 | bw: 58.0 | bitrate: 640.0 kbps --[Information] [31/10/2010 19:30:35] Postprocessing ---[Information] Deleting intermediate files --[Information] [31/10/2010 19:30:35] Job completed
__________________
BeHappy, AviSynth audio transcoder. |
31st October 2010, 21:49 | #5840 | Link |
Mr. Sandman
Join Date: Sep 2003
Location: Haddonfield, IL
Posts: 11,768
|
ffaudiosource ?
__________________
MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! |
Tags |
megui |
Thread Tools | Search this Thread |
Display Modes | |
|
|