Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
19th July 2004, 13:12 | #681 | Link | |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Quote:
No, almost all the methods described in the guides here actually produce five different audio channels and many also add a sixth LFE channel. They either take information that is already in the 2-channel stereo mix and manipulate it in some way to produce the differences, or else they add artificial ambience to generate a difference. Once you get them to work, I think you'll be quite surprised with the results. As for your problem with Besweet, it is most likely due to what daphy just posted. Try the following:[list=1][*]Go to the Edit menu and choose Preferences. [*]Click the Disk I/O tab. [*]Set the use WAVEFORMATEXTENSIBLE dropdown list to never. [/list=1] This should fix your problem. Happy encoding Steve. |
|
19th July 2004, 15:05 | #682 | Link | |
Banned
Join Date: Jun 2002
Location: The Netherlands
Posts: 326
|
Quote:
EoH |
|
19th July 2004, 15:08 | #683 | Link | |
Banned
Join Date: Jun 2002
Location: The Netherlands
Posts: 326
|
3 times now
Quote:
3 times the question 3 the times the answer In the last 10 messages !! People, please search before asking !! Thanks ! EoH |
|
19th July 2004, 15:50 | #684 | Link | |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Re: 3 times now
Quote:
Perhaps a good solution to this recurring question would be to edit your original guide and add a mention of this step. Feel free to use my screen grab, the one that daphy used. Steve. |
|
19th July 2004, 19:21 | #685 | Link | |
Banned
Join Date: Jun 2002
Location: The Netherlands
Posts: 326
|
Re: Re: 3 times now
Quote:
But only after I finally find out how !! When I try to edit the message, I get the error : your message has too many images. And I should remove some...... (the images were never there in the first place when I started the guide (I had just links to the pictures), but included later by a moderator. And now I read it back it contains some pictures on the wrong place, the layout is a bit of a mess..... but I cannot edit because of the message......) thanks for the pic ! EoH Last edited by Eye of Horus; 19th July 2004 at 19:29. |
|
19th July 2004, 20:55 | #686 | Link |
Registered User
Join Date: Dec 2002
Posts: 218
|
I did a test DVD with two different audio tracks. One is this:
http://www.planetquake.com/filterfactory/3daudio.html The other one is the guide by EoH. The first one which has the 5 channels along with the subwoofer is not good for a movie. It divides up the voices and it sounds more like a concert hall than anything (plus, I can do that same effect just by using my receiver). For EoH's output, it's much better than the above where the voices have less of the echo (but it was still there). Unless there is a stereo2surround which emphasizes more on the background music/other effects and leaves the voices in the center, I think I will keep to stereo. Another setback was that my source had muffled audio. Normally, it sounds fine. When it gets just a bit louder, it will start to get muffled (like when someone is talking through a pillow). Both of the conversions above makes this worse. I cannot find an audio filter that solves this muffled audio and I have set up a thread asking this question but nobody replied. Anyway, this was a pretty good experience. This would work well for CDs and concerts. So thank you to those who came up with this. Last edited by Sakuya; 20th July 2004 at 07:09. |
29th July 2004, 08:21 | #687 | Link |
Miles Freak
Join Date: Apr 2003
Location: Europe
Posts: 652
|
Hi folks,
Iīve found a nice VST plugin to play around with virtual room size parameters. Please please check it out, wheater itīs worth to add in the vst collection
__________________
CYA Daphy |
23rd August 2004, 09:38 | #690 | Link |
Registered User
Join Date: Dec 2003
Location: Germany
Posts: 12
|
Hi folks,
been a few months since I was last here and it looks like I've got quite a bit of catching up to do. Anyhow the reason for the post is I've got an update to my bidule that I have u/l to the ftp (desertrat_ambi_combo.bidule) and a need to give a bit of explanation to go along with it. First I would like to ask that these 2 files be removed from the server desertrat_stereo2ambisonic_ambi_1.5_combo (ver 2).bidule desertrat_stereo2ambisonic_ambi_1.5_combo (ver 3).bidule they were put up way to early, before a sufficient amount of testing on my part, sorry if this may have caused anyone and trouble. These 2 bidules will cause distortion on newer source material ie. anything that has a peak close to 0.0 dB. So now on to the revised method... The bidule still has a left and right chain, the left side is taken from EoH's ambisonic method and uses the same settings. The right side is based on the ambi 1.5 method with the WXYZ to 5.1 set to J and the three gain modules after it should be set to the same setting. I normally use one the following settings for the gain modules -10dB, -15dB -18dB -21dB depending on what sounds best for the particular type of music I'm using it on. The gain must be set for a minimun -5dB or you will most likely get distortion in your end results. The gain modules allow you to control the amount of mix between the left and right sides. The gain modules are on the right side because the right side has a much higher level than the right side, somewhere around -15db to - 18dB seems to be where there's a pretty even mix between the two. I have found that -15dB setting seems to work pretty well with reggae and dub. -18dB and -21dB work better on ambient music such as Jarre, Eno, etc. Cheers, desertrat Last edited by desertrat; 7th September 2004 at 09:13. |
1st September 2004, 19:09 | #691 | Link |
Registered User
Join Date: Feb 2004
Posts: 6
|
I have to problems
I know this prob had'n very movement lately but i have some questions 1st:BeSweet tell's me that the wav file is invalid 2nd:When im able to split the 6 chan to individual wavs and put it in the Surcode it also says that the wave header is invalid Wt should i do??? Greetz 2 ALL
__________________
To download is human. To share is Divine |
1st September 2004, 19:14 | #692 | Link | |
Banned
Join Date: Jun 2002
Location: The Netherlands
Posts: 326
|
Quote:
Anyway : start Bidule and go to the settings. Make sure that WAVEFORMATEXTENSIBLE is set to "never". That should fix the problems. In the version of Bidule used for the guide, this function didn't exist yet. I wanted to update the guide, but I get all kind of remarks about a ""too long message" and cannot save it..... good luck and kind regards, EoH |
|
1st September 2004, 21:10 | #693 | Link |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Hi AI,
For a graphic that shows the quick solution to this problem, see Step 1 of http://forum.doom9.org/showthread.ph...hreadid=79862. If you follow the directions there, you'll come up with a file that will work fine in SurCode. Hope this helps. Steve. |
2nd September 2004, 00:40 | #694 | Link |
Registered User
Join Date: Feb 2004
Posts: 6
|
1st of all thanks for the so quick help
Im sory that there was already an answer for my question, and i repeated.(im new in this thread) You were right about my problem but now i have another but just in Surcode. And i think its nasty: Now i load the wavs(ok) but when i set encode he says "Parallel port lock required to encode" Now this time i checked the web for this issue and nothing. By the way when i tried de-activate the parallel port the blue screen showed up and system crashed Can u help m?
__________________
To download is human. To share is Divine |
2nd September 2004, 01:27 | #695 | Link | |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Quote:
|
|
6th September 2004, 23:56 | #696 | Link |
Registered User
Join Date: Feb 2004
Posts: 6
|
Well i reinstaled the program and all went fine but.....i only hear noise. I tried all possible donfigurations. I even tried BeSweet to make the ac3 but nothing..
Everything is alright but the dts/ac3 encoding dont work. I only ambisonics wonking in pc(WAV)...and i can say its quite impressive, using the realtime DD5.1 provided by nforce(wich has not the briliance of DTS). Please help m. Its only this that dont work By the way is there any other DTS encoder than Surcode? Greetz, and thanks in advance
__________________
To download is human. To share is Divine |
7th September 2004, 20:40 | #697 | Link | |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Quote:
AI, if you didn't get either the DTS or AC3 encoding to work, then what you were hearing was not "realtime DD5.1" but some simulation provided by nforce. I haven't heard of any other DTS encoder. Keep trying Besweet AC3Machine. It should work. Don't give up! |
|
19th September 2004, 12:59 | #698 | Link |
Registered User
Join Date: Sep 2004
Posts: 3
|
AC3 Encoding Installation Package
Hi all!
I build a installation routine what will install all of needed programs and files for the stereo to 5.1 AC3 conversation. The routine will include: Sonic Foundry Soft Encode Plogue Bidule BeSweet SSRC Layouts, Groups and Plugins from the server http://www.needfulthings.webhop.org/ Also a WIN32 GUI to handle Bidule,BeSweet,SSRC and Sonic will be included (still in development). I already have contact with Daphy about uploading/testing the routine. For more information: carmenelectra_gc@yahoo.de schwa226 |
19th September 2004, 15:58 | #699 | Link | |
Registered User
Join Date: May 2004
Location: Montreal
Posts: 729
|
Re: AC3 Encoding Installation Package
Quote:
You might want to include AC3Enc since SoftEncode is no longer available and some people are not comfortable using pirated software. Another suggestion would be to read the registry key for the current VSTPlugins directory and install any plugins there. Then the user could be reminded in a prompt or guide to change the Plogue VSTPlugins folder to point to it. In this way, those of us who have other VSTs installed will have access to all our VST plugins from all hosts. It could be argued that one can always have supplementary VST plugin directories in hosts such as Cubase and Nuendo, but this approach doesn't give Plogue access to plugins outside of its own directory. I look forward to checking out your routine! Regards, Steve. |
|
|
|