BatchUpdateIFO 0.9.0.10b

Trahald · 23rd October 2004, 20:44

Started a new thread since the change list was getting long.

Here is the origional post which contains a quick tutorial http://forum.doom9.org/showthread.php?s=&threadid=76630

Find it at http://bui.dvd2dvd.org

NOTE: if batchupdateIFO does not run for you do the following-->

Code:

download this --
BatchUpdateIfo - Framework This installer includes common dialogue for many controls for 
windows for all programing languages and mfc/c++ .dlls 
needed for use (Thanks to DarkListener for the installer and hosting it!)

0.9.0.10b
- Fixed - what 09010 broke (cell command table update)
0.9.0.10
- Fixed - Handles 0 cell authored properly (0 cell originals werent a problem.) Muxman is able to create pgcs with 0 cells in compiles so this had to be addressed. Also updates end byte of pgci_srp table to new size if changed.
0.9.0.9
- Fixed - When angles are removed chapters are updated to reflect the change. Since i was there i fixed the code for when the authored pgc has more cells than the original. (it should take any quantity of cells in the pgc you can legally create. )

0.9.0.8
- Added - 'Reverse' mode which will put the final files in the Authored directory (Only Copies files in Batch Mode). This was Eyes'Only's idea to make it easier to use IMGTOOL, also leaves original dir alone. The ifo's update in the same direction but the files in the original directory are left untouched (in Batch mode). Backup files are placed in the original directory.
- Added - Option to only copy sub streams or audio streams separately.
- Added - Progress Bar for copying routines during Reverse Update. (if you d-loaded before feb-28 8:40pm EST then redownload.. corrected a tiny oopsie adding the progress bar routine caused)

0.9.0.6
- When copy audio/sub tables option is on it now also updates the vtsi_mat table offset 0x200->0x400 which is the audio/sub stream tables. prior version only updated the pgci audio/sub tables. this was fine as long as extra audios/subs werent added. - thanks lev for finding this issue

0.9.0.5
- Correct FSEEK problem during RCE removal <thanks [slim]d12 for pointing out the issue>

0.9.0.4
- Some Pro DVDs have PGCs with no Programs or cells in some of the IFOs. I coded this condition as an error and you would get a PopUp that a 0 cell PGC existed and that VTS would be skipped. BatchUpdate now will process such DVDS.
It will now also take authored IFOs with PGCS with no programs/cell. If cells existed on the original they would reflect as 0 in the final IFO

- Fixed errors in the ifo summary routine (didnt effect the update process).. I used parameters from IFOEdit that I assumed to be right but were not. Thanx to Dest for catching it.

- Other Stuff

As before the sources are available upon request via the GPL (If you would like to see my poor programing skills

)

jel · 25th October 2004, 01:42

thanks for the update Trahald.

i know one irc user in particular who will be very happy for this release

cheers

jon

Lev · 16th January 2005, 07:34

when i try running 0.9.0.6 i get an error about MFC71.DLL not being found.

Darklistener · 16th January 2005, 10:45

Me too. I have tried do download it from some pages but it didn't work.

Trahald · 16th January 2005, 17:15

i went to a smaller exe that doesnt include mfc.dll.... m$ should provide it.. i'll find a link and post it

Darklistener · 16th January 2005, 17:55

Hi Trahald,
as I mentioned that this will not work was an mistake sry.
I got an other error not the same is I thought first.
I had also to download msvcr71.dll.
BatchUpdateIFO worked with this 2 .dlls fine 4 me
thx Trahald for this tool

Trahald · 16th January 2005, 18:09

yeah.. i would have to link to that dll as well..anyways.. i just reuploaded a version of 0906 with mfc statically linked so the dll files arent needed anymore. so redownload 0906 again if you dont already have newest mfc on your system.

oh and thanks dl

Darklistener · 16th January 2005, 18:41

Is BatchUpdateIFO able to do Seamless Branching titel?

Trahald · 16th January 2005, 19:04

yeah.. all it does is pull the pgc info over from the authored ifo.. batchupdate doesnt really have to know whats going on in the stream. what makes seamless branch really work is in the vobs which i dont have to touch. i dont think ive tried a seamless multistory since i made it tho.. i might try t2 tonight.. or if i can find my matrix (my empty dvd case is in one box .. the disk is probably mixed in one of my spindles in another box.. wish me luck) the fun of moving

something you may already know... keep in mind that the result will be what scenarist gives which is a non-seamless multistory.

Darklistener · 13th February 2005, 12:41

Hi Trahald

I made an "BatchUpdateIFO FrameWork"

it installs and reg. COMDLG32.OCX, mfc71.dll, msvcr71.dll.

It has only to be installed once and you can make your .exe smaller like .net FW

.BUI FrameWork

If some filemirroring is needed tell me I have some traffic over

Trahald · 13th February 2005, 16:38

ahh.. thanks alot, DL. i'll let you know about the mirroring

Darklistener · 13th February 2005, 18:21

You better link it at your first post under
NOTE: if batchupdateIFO does not run for you do the following-->
or your hp or nobody will find it

Only if you like it

4 mirroring -> pm or irc (nick Dark(y)or Shugo) anytime you need

Trahald · 13th February 2005, 18:30

done

Trahald · 25th February 2005, 20:18

Couple things added.. see change list.

Darklistener · 25th February 2005, 20:54

Its growing bigger and bigger

nice as always ^^
thx

Trahald · 28th February 2005, 16:41

I added a progress bar for the copy routines during reverse update.. i didnt renumber the version just updated the archive.

Raster · 7th March 2005, 08:17

Had to reinstall windows and batchupdateifo don't work anymore so I figgered I need the .BUI FrameWork but the link no longer works.

Is this temporary?

muppets · 7th March 2005, 10:17

@Raster: the download link for .BUI FrameWork isn't working for me either. but you can do a google search for the following files: COMDLG32.OCX, mfc71.dll, msvcr71.dll. just download and install them manually.

muppets

Raster · 7th March 2005, 10:41

Thanks muppets, I will do that.

Update:
For those who have trouble finding the files (comdlg32.ocx, mfc71.dll, msvcr71.dll):
http://www.dll-files.com/dllindex/index.shtml
http://freeware.it-mate.co.uk/?Cat=OCX_Files

Update2:
hummmm... Ok, now where do they go? I using Windows XP Pro. Readme's with dll files say to put in system folder. Is this correct? They do not go in the system32 folder? And where does comdlg32.ocx go?

Trahald · 7th March 2005, 14:34

i believe the all go into system 32 (nt oses)... the mfc dlls arent needed at the moment (i went back to compiling them into them into the exe) .. but the common dialog (ocx) is. it can be registered by doing the following after you put them into the system32 directory

Windows 95, 98, or Me:
regsvr32 \windows\system\COMDLG32.OCX

Windows NT or 2000:
regsvr32 \WINNT\system32\COMDLG32.OCX

Windows XP:
regsvr32 \windows\system32\COMDLG32.OCX

23rd October 2004, 20:44	#1 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	BatchUpdateIFO 0.9.0.10b Started a new thread since the change list was getting long. Here is the origional post which contains a quick tutorial http://forum.doom9.org/showthread.php?s=&threadid=76630 Find it at http://bui.dvd2dvd.org NOTE: if batchupdateIFO does not run for you do the following--> Code: download this -- BatchUpdateIfo - Framework This installer includes common dialogue for many controls for windows for all programing languages and mfc/c++ .dlls needed for use (Thanks to DarkListener for the installer and hosting it!) 0.9.0.10b - Fixed - what 09010 broke (cell command table update) 0.9.0.10 - Fixed - Handles 0 cell authored properly (0 cell originals werent a problem.) Muxman is able to create pgcs with 0 cells in compiles so this had to be addressed. Also updates end byte of pgci_srp table to new size if changed. 0.9.0.9 - Fixed - When angles are removed chapters are updated to reflect the change. Since i was there i fixed the code for when the authored pgc has more cells than the original. (it should take any quantity of cells in the pgc you can legally create. ) 0.9.0.8 - Added - 'Reverse' mode which will put the final files in the Authored directory (Only Copies files in Batch Mode). This was Eyes'Only's idea to make it easier to use IMGTOOL, also leaves original dir alone. The ifo's update in the same direction but the files in the original directory are left untouched (in Batch mode). Backup files are placed in the original directory. - Added - Option to only copy sub streams or audio streams separately. - Added - Progress Bar for copying routines during Reverse Update. (if you d-loaded before feb-28 8:40pm EST then redownload.. corrected a tiny oopsie adding the progress bar routine caused) 0.9.0.6 - When copy audio/sub tables option is on it now also updates the vtsi_mat table offset 0x200->0x400 which is the audio/sub stream tables. prior version only updated the pgci audio/sub tables. this was fine as long as extra audios/subs werent added. - thanks lev for finding this issue 0.9.0.5 - Correct FSEEK problem during RCE removal <thanks [slim]d12 for pointing out the issue> 0.9.0.4 - Some Pro DVDs have PGCs with no Programs or cells in some of the IFOs. I coded this condition as an error and you would get a PopUp that a 0 cell PGC existed and that VTS would be skipped. BatchUpdate now will process such DVDS. It will now also take authored IFOs with PGCS with no programs/cell. If cells existed on the original they would reflect as 0 in the final IFO - Fixed errors in the ifo summary routine (didnt effect the update process).. I used parameters from IFOEdit that I assumed to be right but were not. Thanx to Dest for catching it. - Other Stuff As before the sources are available upon request via the GPL (If you would like to see my poor programing skills ) __________________ ...yeah...but...why on earth would I compare apples with apples? Last edited by Trahald; 12th June 2005 at 18:34.

16th January 2005, 17:15	#5 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	i went to a smaller exe that doesnt include mfc.dll.... m$ should provide it.. i'll find a link and post it __________________ ...yeah...but...why on earth would I compare apples with apples?

16th January 2005, 18:09	#7 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	yeah.. i would have to link to that dll as well..anyways.. i just reuploaded a version of 0906 with mfc statically linked so the dll files arent needed anymore. so redownload 0906 again if you dont already have newest mfc on your system. oh and thanks dl __________________ ...yeah...but...why on earth would I compare apples with apples?

16th January 2005, 19:04	#9 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	yeah.. all it does is pull the pgc info over from the authored ifo.. batchupdate doesnt really have to know whats going on in the stream. what makes seamless branch really work is in the vobs which i dont have to touch. i dont think ive tried a seamless multistory since i made it tho.. i might try t2 tonight.. or if i can find my matrix (my empty dvd case is in one box .. the disk is probably mixed in one of my spindles in another box.. wish me luck) the fun of moving something you may already know... keep in mind that the result will be what scenarist gives which is a non-seamless multistory. __________________ ...yeah...but...why on earth would I compare apples with apples?

13th February 2005, 12:41	#10 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	Hi Trahald I made an "BatchUpdateIFO FrameWork" it installs and reg. COMDLG32.OCX, mfc71.dll, msvcr71.dll. It has only to be installed once and you can make your .exe smaller like .net FW .BUI FrameWork If some filemirroring is needed tell me I have some traffic over Last edited by Darklistener; 13th February 2005 at 12:43.

25th October 2004, 01:42	#2 \| Link
jel Registered User Join Date: Oct 2003 Location: city of churches Posts: 1,414	thanks for the update Trahald. i know one irc user in particular who will be very happy for this release cheers jon

16th January 2005, 07:34	#3 \| Link
Lev Registered User Join Date: Nov 2001 Posts: 184	when i try running 0.9.0.6 i get an error about MFC71.DLL not being found.

16th January 2005, 10:45	#4 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	Me too. I have tried do download it from some pages but it didn't work.

16th January 2005, 17:55	#6 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	Hi Trahald, as I mentioned that this will not work was an mistake sry. I got an other error not the same is I thought first. I had also to download msvcr71.dll. BatchUpdateIFO worked with this 2 .dlls fine 4 me thx Trahald for this tool

16th January 2005, 18:41	#8 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	Is BatchUpdateIFO able to do Seamless Branching titel?

13th February 2005, 16:38	#11 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	ahh.. thanks alot, DL. i'll let you know about the mirroring __________________ ...yeah...but...why on earth would I compare apples with apples?

13th February 2005, 18:21	#12 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	You better link it at your first post under NOTE: if batchupdateIFO does not run for you do the following--> or your hp or nobody will find it Only if you like it 4 mirroring -> pm or irc (nick Dark(y)or Shugo) anytime you need Last edited by Darklistener; 13th February 2005 at 18:31.

13th February 2005, 18:30	#13 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	done __________________ ...yeah...but...why on earth would I compare apples with apples?

25th February 2005, 20:18	#14 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	Couple things added.. see change list. __________________ ...yeah...but...why on earth would I compare apples with apples?

25th February 2005, 20:54	#15 \| Link
Darklistener Bavarian Ripping Angel Join Date: May 2003 Location: Bavaria Posts: 119	Its growing bigger and bigger nice as always ^^ thx

28th February 2005, 16:41	#16 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	I added a progress bar for the copy routines during reverse update.. i didnt renumber the version just updated the archive. __________________ ...yeah...but...why on earth would I compare apples with apples?

7th March 2005, 08:17	#17 \| Link
Raster Team Noob Join Date: Dec 2002 Location: USA Posts: 55	.BUI FrameWork link dead Had to reinstall windows and batchupdateifo don't work anymore so I figgered I need the .BUI FrameWork but the link no longer works. Is this temporary? __________________ ...sometimes it's like trying to chop down a tree with a butter knife.

7th March 2005, 10:17	#18 \| Link
muppets Registered User Join Date: Jun 2004 Posts: 16	@Raster: the download link for .BUI FrameWork isn't working for me either. but you can do a google search for the following files: COMDLG32.OCX, mfc71.dll, msvcr71.dll. just download and install them manually. muppets

7th March 2005, 10:41	#19 \| Link
Raster Team Noob Join Date: Dec 2002 Location: USA Posts: 55	Thanks muppets, I will do that. Update: For those who have trouble finding the files (comdlg32.ocx, mfc71.dll, msvcr71.dll): http://www.dll-files.com/dllindex/index.shtml http://freeware.it-mate.co.uk/?Cat=OCX_Files Update2: hummmm... Ok, now where do they go? I using Windows XP Pro. Readme's with dll files say to put in system folder. Is this correct? They do not go in the system32 folder? And where does comdlg32.ocx go? __________________ ...sometimes it's like trying to chop down a tree with a butter knife. Last edited by Raster; 7th March 2005 at 11:09.

7th March 2005, 14:34	#20 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	i believe the all go into system 32 (nt oses)... the mfc dlls arent needed at the moment (i went back to compiling them into them into the exe) .. but the common dialog (ocx) is. it can be registered by doing the following after you put them into the system32 directory Windows 95, 98, or Me: regsvr32 \windows\system\COMDLG32.OCX Windows NT or 2000: regsvr32 \WINNT\system32\COMDLG32.OCX Windows XP: regsvr32 \windows\system32\COMDLG32.OCX __________________ ...yeah...but...why on earth would I compare apples with apples?