smartLabs tsMuxeR: Transport Stream muxer - Page 44

roman76r · 31st March 2008, 10:59

fdb

Quote:

I don't clear the pulldown flag. I just set RPTFRM to 0 in each frame. This seems to be the common practice on Blu-ray streams

OK. Now I understood. It is other transformation which demands separate parameter in GUI.

dirkr · 31st March 2008, 11:02

@roman76r:

1.7.2b seems to work (any changes comparing 1.71.b related to that issue?) but I would feel better if you could make the other changes too because Mediainfo says again 1080i and I don't know what happened if Popcornhour brings a new firmware version.....

n0mag!c · 31st March 2008, 11:48

Quote:

Originally Posted by mmace

I tried this software yesterday on 2 films, both are 1920x1080 mpeg2 23.976fps m2v files, I also had .dts 6 channel 1500kps for each of them.
I tried muxing to m2ts as well as Blu-ray structure, both films ended up with no audio (I tried playing the .dts and it's fine on its own)

U ain't say where you're playing movies. Please be more specific.

mmace · 31st March 2008, 12:13

they aren't playing with audio on my PC in mpc or vlc. I'm wanting to put them on BD in BDMV format but cannot seem to get a working mux

n0mag!c · 31st March 2008, 12:45

Quote:

Originally Posted by mmace

they aren't playing with audio on my PC in mpc or vlc. I'm wanting to put them on BD in BDMV format but cannot seem to get a working mux

You know, the same thing happens on my PC. DTS audio didn't play with MediaPlayerClassic with HAALI media splitter, but plays fine with power dvd. I didn't go deep with this issue 'cause it ain't really bother me as I'm watching movies on PS3 on AVCHD or BD-R(E).

mmace · 31st March 2008, 12:55

it doesn't playback with PDVD either, will give it a go and burn to BD-RE then to see if it works on the PS3, cheers for the help (here & my other post)

survivant001 · 31st March 2008, 14:07

@roman76

I have a sample for the split and playlist

http://forum.doom9.org/showthread.php?t=136419

hope that can help.

thanks

buggymonkey · 31st March 2008, 15:37

Hi Roman

excellent tool keep up the good work ,
is there anyway you could get a DTS-HD to AC3 downconverter in there ???

I know I want everything

many thanks again

roman76r · 31st March 2008, 16:04

survivant001
Thanks. I'll work on it.

dirkr · 31st March 2008, 16:28

Quote:

Originally Posted by buggymonkey

is there anyway you could get a DTS-HD to AC3 downconverter in there ???

Why? every reveicer today could handle dts. And tsmuxer make a downconvert. So why?

Nobody needs it really

vob · 31st March 2008, 16:39

Quote:

Originally Posted by dirkr

Why? every reveicer today could handle dts. And tsmuxer make a downconvert. So why?

Nobody needs it really

You forget PS3 users that don't want to burn BR but play the streams from their hard disk or media server (mediatomb etc). PS3 cannot handle DTS within eg. MPEG containers. But it can play AC3 AAC aso. So it would make things easier.

btw: to convert dts to ac3 use ffmpeg

Code:

ffmpeg -i input.dts -acodec ac3 -ac 6 -ab 384K output.ac3

dirkr · 31st March 2008, 16:44

Quote:

Originally Posted by vob

You forget PS3 users that don't want to burn BR but play the streams from their hard disk or media server (mediatomb etc). PS3 cannot handle DTS within eg. MPEG containers. But it can play AC3 AAC aso. So it would make things easier.
/CODE]

ok, didn't know that but i own a ps3

Ryu77 · 31st March 2008, 17:26

Quote:

Originally Posted by vob

btw: to convert dts to ac3 use ffmpeg

Code:

ffmpeg -i input.dts -acodec ac3 -ac 6 -ab 384K output.ac3

Why use 384Kbs, when the PS3 can decode ac3 at 640Kbs? Wouldn't you prefer the higher bitrate to increase the quality?

vob · 31st March 2008, 20:06

Quote:

Originally Posted by Ryu77

Why use 384Kbs, when the PS3 can decode ac3 at 640Kbs? Wouldn't you prefer the higher bitrate to increase the quality?

Sure you can even use 640K. This was just an example

BTW: You need he ability to hear the difference. And the equipment

hero88 · 31st March 2008, 20:25

I still have issues with 1.7.2 and extracting subs, I am extracting from ID4, blu-ray, bd+ removed.
I have extracted 4 subs 3 us & 1 dk, and SupRead is only able to see the first line in one of the them, it gets the number of lines and timings correctly though, whereas SupRip is able to detect all text in all 4 files succesfully.

Let me know if you wish to have a look at any the sup files

kurt · 31st March 2008, 20:28

Quote:

Originally Posted by hero88

I still have issues with 1.7.2 and extracting subs, I am extracting from ID4, blu-ray, bd+ removed.
I have extracted 4 subs 3 us & 1 dk, and SupRead is only able to see the first line in one of the them, it gets the number of lines and timings correctly though, whereas SupRip is able to detect all text in all 4 files succesfully.

Let me know if you wish to have a look at any the sup files

same here with Pirates 3. maybe it's a bug in supread...

hero88 · 31st March 2008, 23:30

I have now tried to demux a sub using tsremux 0.0.20, and supread is still unable to read it so it seems to be an issue with supread and not tsmuxer. Suprip is still able to read it.

Suprip has an issue with the timings though, so if anyone else has issues, here is my workaround.

Get the subs, load them into supread and save the srt without doing anything, this will save the timings.
Now load the sub into suprip and ocr it, save that also.

load both srt files into Subtitle Processor and copy the timings from the supread created srt to the srt created by suprip.

Save the suprip created srt again and you should have a file which should be working correctly.

fib0by · 1st April 2008, 05:25

Quote:

Originally Posted by tchrin

Thanks for your kind answer:

The input file
Link to download the .M2TS file coming straight from my SONY camcorder. Size less than 6 Mb.

http://www.yousendit.com/transfer.ph...E5F3EF31C17921

The generated BR output
Link containing the entire Blu-Ray structure generated by TSMuxer 1.6.3.

http://www.yousendit.com/transfer.ph...A7D02B1C05EA3C

Authored with 1.7.2 and the PS3 doesn't play anything - black screen, no sound.

73ChargerFan · 1st April 2008, 05:33

hero88, I just survived a book of tongue twisters by Dr Seuss, and your post gave me a headache.

Quatre · 1st April 2008, 07:58

Quote:

Originally Posted by vob

You forget PS3 users that don't want to burn BR but play the streams from their hard disk or media server (mediatomb etc). PS3 cannot handle DTS within eg. MPEG containers. But it can play AC3 AAC aso. So it would make things easier.

btw: to convert dts to ac3 use ffmpeg

Code:

ffmpeg -i input.dts -acodec ac3 -ac 6 -ab 384K output.ac3

use mkv2vob to make an x264 mkv file into one playable on ps3 (it remuxes to avc or transcodes if it has to) and recodes dts to ac3.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

31st March 2008, 11:02	#862 \| Link
dirkr Registered User Join Date: Feb 2007 Posts: 31	@roman76r: 1.7.2b seems to work (any changes comparing 1.71.b related to that issue?) but I would feel better if you could make the other changes too because Mediainfo says again 1080i and I don't know what happened if Popcornhour brings a new firmware version.....

31st March 2008, 12:13	#864 \| Link
mmace Registered User Join Date: Mar 2007 Posts: 123	they aren't playing with audio on my PC in mpc or vlc. I'm wanting to put them on BD in BDMV format but cannot seem to get a working mux

31st March 2008, 12:55	#866 \| Link
mmace Registered User Join Date: Mar 2007 Posts: 123	it doesn't playback with PDVD either, will give it a go and burn to BD-RE then to see if it works on the PS3, cheers for the help (here & my other post)

31st March 2008, 14:07	#867 \| Link
survivant001 Registered User Join Date: Nov 2007 Posts: 449	@roman76 I have a sample for the split and playlist http://forum.doom9.org/showthread.php?t=136419 hope that can help. thanks

31st March 2008, 15:37	#868 \| Link
buggymonkey Registered User Join Date: Mar 2008 Posts: 9	Hi Roman excellent tool keep up the good work , is there anyway you could get a DTS-HD to AC3 downconverter in there ??? I know I want everything many thanks again

31st March 2008, 16:04	#869 \| Link
roman76r Registered User Join Date: Jan 2008 Posts: 140	survivant001 Thanks. I'll work on it.

31st March 2008, 20:25	#875 \| Link
hero88 Registered User Join Date: Feb 2003 Location: Denmark Posts: 11	I still have issues with 1.7.2 and extracting subs, I am extracting from ID4, blu-ray, bd+ removed. I have extracted 4 subs 3 us & 1 dk, and SupRead is only able to see the first line in one of the them, it gets the number of lines and timings correctly though, whereas SupRip is able to detect all text in all 4 files succesfully. Let me know if you wish to have a look at any the sup files

31st March 2008, 23:30	#877 \| Link
hero88 Registered User Join Date: Feb 2003 Location: Denmark Posts: 11	I have now tried to demux a sub using tsremux 0.0.20, and supread is still unable to read it so it seems to be an issue with supread and not tsmuxer. Suprip is still able to read it. Suprip has an issue with the timings though, so if anyone else has issues, here is my workaround. Get the subs, load them into supread and save the srt without doing anything, this will save the timings. Now load the sub into suprip and ocr it, save that also. load both srt files into Subtitle Processor and copy the timings from the supread created srt to the srt created by suprip. Save the suprip created srt again and you should have a file which should be working correctly.

1st April 2008, 05:33	#879 \| Link
73ChargerFan Registered User Join Date: Dec 2006 Posts: 523	hero88, I just survived a book of tongue twisters by Dr Seuss, and your post gave me a headache.