RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Preludee01]

Was wondering, whats "Low Priority" for? I alwast use it when encoding. But not 100% sure what its for.

[8ternity]

Originally Posted by Preludee01

Was wondering, whats "Low Priority" for? I alwast use it when encoding. But not 100% sure what its for.

It's the priority of use of the program during conversion. If you need to do some thing with your computer like surfing on the net, make paiements, chat, the memory request are in low priority. If you want to use it only for conversion and maximise your fps rate, you set it to "0".

If my knowledge is good

[Preludee01]

alright tks

[MKVCrazy]

Sorry to bother you again, Atak. I have got a few basic questions. I have a clip which has 44.0 kHz and I want to make all my audio output to 48.0 kHz. How can I do this and also how can I make audio profile HE-AAC 2CH 48 kbps? The least I see in the drop down is HE-AAC 2CH 64 kbps.

[Atak_Snajpera]

I have a clip which has 44.0 kHz and I want to make all my audio output to 48.0 kHz.

ripbot264 always automatically resamples audio to 48khz.

The least I see in the drop down is HE-AAC 2CH 64 kbps.

I see no logical explanation why user would need 48 kbps option. Difference in size is too small compared to video size. 60 min -> 48kbps / 8 * 3600 = 21.1 MB vs 64kbps / 8 * 3600 = 28.1 MB

[AMED]

I'm not sure if i'm missing something here, but does RipBot support creating anamorphic encodes like MeGUI?

The output of the few DVD movies i have tested with RipBot don't seem to be stretching on playback.

I'm not sure if it's my steps causing the problem, so i'll list what i'm doing.

1. Open ripped dvd in RipBot clicking on first .VOB
2. Once loaded, I click Properties.
3. Auto Crop, size is set to do not resize.
4. Denoise set to Flim

How RipBot encode plays in MPC-HC


How MeGUI encode plays in MPC-HC

#MT


#VideoSource
LoadPlugin("E:\RipBot264v1.14.5\Tools\dgindex\DGDecode.dll")
video=MPEG2Source("D:\temp\RipBot264temp\job1\job1.d2v")

#Deinterlace



#Decimate



#Crop
video=Crop(video,10,68,-6,-72)


#Resize



#Colors

 

#Denoise
LoadPlugin("E:\RipBot264v1.14.5\Tools\AviSynth plugins\fft3dgpu\fft3dgpu.dll")
LoadPlugin("E:\RipBot264v1.14.5\Tools\AviSynth plugins\gradfun2db\gradfun2db.dll")
video=FFT3DGPU(video,sigma=1.25).gradfun2db
 
#Subtitles



#AudioSource
LoadPlugin("E:\RipBot264v1.14.5\tools\AviSynth plugins\NicAudio\NicAudio.dll")
audio=NicAC3Source("D:\temp\RipBot264temp\job1\job1 T80 3_2ch 384Kbps DELAY 0ms.ac3")
audio=ResampleAudio(audio,48000)
#DownMix
Import("E:\RipBot264v1.14.5\Tools\AviSynth plugins\Scripts\DownMixAudio.avs")
audio=DownMix2Stereo(audio)

#Delay
audio=DelayAudio(audio,0)


#Tempo



#Normalize



#AudioDub
audio=ConvertAudioTo16bit(audio)
AudioDub(video,audio)

#Triming



#AVSameLength



#ColorSpace
ConvertToRGB

[Atak_Snajpera]

Anamorphic works only if resolution is 720x480 or 720x576 or 1280x1080 or 1440x1080

[illestdomer2005]

I am trying to convert "Be Kind Rewind," and I keep getting the error message in Media Player Classic:

"DirectShowSource: couldn't open file [directory]: The system cannot find the file specified.

(C:\Temp\RipBot264\job5\getinfo.avs, line 2)"

Any help? I am using 1.14.4. Thanks!

[Ajax_Undone]

I have released a new installer on mediafire the link is in my signature...
There is also a torrent if you prefer.

Oh I almost forgot if you choose to download via the torrent please Seed.

[Preludee01]

Is thier any diference between yours and Atak_Snajpera?

[Ajax_Undone]

Originally Posted by Preludee01

Is thier any diference between yours and Atak_Snajpera?

'Mine?' I just packed it into an nsis script installer that includes the extras needed to get it to run...

[tommy9901]

Originally Posted by Rumbah

As you are using Windows 7, try using a tool to change the default DirectShow behaviour. You could use http://www.codecguide.com/windows7_p...er_tweaker.htm . Switch the desired decoder to ffdshow. If you want to use the Microsoft vc1 decoder, you have to select ffdshow in the program and then set the decoder in ffdshow to wmv9.
You have to set it only for 32 bit (and need a 32 bit ffdshow) as avisynth uses 32 bit.

i've the same problem in mpeg-1 ,what can i do

[MKVCrazy]

Originally Posted by Atak_Snajpera

ripbot264 always automatically resamples audio to 48khz.

Ok then now this is solved.

Originally Posted by Atak_Snajpera

I see no logical explanation why user would need 48 kbps option. Difference in size is too small compared to video size. 60 min -> 48kbps / 8 * 3600 = 21.1 MB vs 64kbps / 8 * 3600 = 28.1 MB

Uhm, well that's great then. Do you know if Zune or ZuneHD plays 64kbps HE-AAC audio? By they way do you recommend converting DVD movie backups to PSP format with 64kbps HE-AAC even though the frequency is half? How does half affect the experience?

I still need the answer on how to modify the default FFT3GPU parameters you put in RipBot264.

MKVCrazy

[Atak_Snajpera]

Do not use HE-AAC because mobile players (PSP and so on) do not decode HE part. Instead of 48khz you will get 24Khz.

[MKVCrazy]

Originally Posted by Atak_Snajpera

Do not use HE-AAC because mobile players (PSP and so on) do not decode HE part. Instead of 48khz you will get 24Khz.

Yes, I noticed that clearly. I'll use 96 LC-AAC then. Sorry if you didn't see my last reply as I edited after you replied.

Is there away to change the default FFT3GPU parameters that's used when selecting any of the DENOISE option? For me, the FILM was is a little too smoothed.

[Rumbah]

I just got an error of Ripbot not finishing an encoding job. With further inspection of the log file I noticed that Ripbot set -fps 23,96 in the x264 command line and it has to be 23.96. I'm using a German Windows and the "," is the normal decimal separator opposed to the English ".". Manually editing the bat file fixes the problem.

My log:

P:\>"C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\tools\bepipe\bepipe.exe" --script "import(^P:\temp\RipBot264temp\job1\job1.avs^)"   | "C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\Tools\enc_aacPlus\enc_aacPlus.exe" - "P:\temp\RipBot264temp\audio.aac" --lc --cbr 98804 

***************************************

 BePipe by dimzon

***************************************

Script used:

# BEGIN

import("P:\temp\RipBot264temp\job1\job1.avs")

# END





Scanning for Audio Stream...

Found Audio Stream

Channels=2, BitsPerSample=16, SampleRate=48000Hz

Writing Header...

Writing Data...

0%
Done!			

********************************************************************

* AACPlus v2 Encoder (using Winamp 5.2 enc_aacplus.dll)

* Source timestamp Mon May 15 17:24:26 2006

* Build May 15 2006, 17:24:35

********************************************************************

* NOTE!	enc_aacplus.dll must be into executable directory

*	get it from Winamp 5.2 plugins directory

*	tested on Winamp 5.2 Release Feb 23 2006 Full (Not Pro) version)

********************************************************************

Input file: -

Output file: P:\temp\RipBot264temp\audio.aac

SampleRate: 48000

ChannelCount: 2

BitsPerSample: 16

Bitrate: 98804

ChannelMode: Stereo

Encoder: AAC-LC

Encoding...
Finalizing...
Done           


P:\>"C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\tools\avs2yuv\pipebuf.exe" "C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\tools\avs2yuv\avs2yuv.exe" "P:\temp\RipBot264temp\job1\job1.avs" -raw - : "C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\tools\x264\x264_x64.exe" --crf 22 --stats "P:\temp\RipBot264temp\job1\job1.stats" --fps 23,96 --min-keyint 24 --keyint 240 --frames 28493 --sar 1:1 --level 3.0 --filter 1,1 --ref 3  --bframes 16 --b-adapt 2  --direct auto --subme 10 --aq-mode 1 --trellis 2 --partitions p8x8,b8x8,i4x4,p4x4 --no-8x8dct --me umh --output "P:\temp\RipBot264temp\video.264" - 480x272 : 2 

x264 [error]: invalid argument: fps = 23,96

P:\temp\RipBot264temp\job1\job1.avs: 480x272, 10000000/417327 fps, 28493 frames

Output error: wrote only 185716 of 195840 bytes


P:\>"C:\Users\Michael\Desktop\Treiber\RipBot264v1.14.5\tools\mp4box\mp4box.exe" -tmp "P:\temp\RipBot264temp"  -add "P:\temp\RipBot264temp\video.264":name="videoklein" -fps 23.96 -add "P:\temp\RipBot264temp\audio.aac":lang=und -mpeg4  -new "C:\Temp\videoklein.mp4" 

Cannot find file P:\temp\RipBot264temp\video.264

Error importing P:\temp\RipBot264temp\video.264:name=videoklein: Requested URL is not valid or cannot be found
-------------------------
 
Elapsed Time: 00h:00m:31s

[Preludee01]

Hey. Ive got a problem. When i use ripbot to re-encode 1080p MKV to 720p MKV, it does not complete. (Worked before for a while). After like 3m to 1h, it say completed. And i dont have nothing in the forlder i saved in it. Usally it takes 6-7h, in 2Pass-Mode. Is their someting that can cause that> tks

[Atak_Snajpera]

After like 3m to 1h, it say completed.

is your CPU stable? Use LINX (link in first post)

[MKVCrazy]

Originally Posted by Atak_Snajpera

is your CPU stable? Use LINX (link in first post)

There's no way to change the default FFT3GPU parameters?

[Atak_Snajpera]

not yet. you are first who does not like my default settings.