DG NV tools - Page 92

Audionut · 30th June 2010, 05:52

Hi neuron2.

Can I poke you with a stick about this : http://forum.doom9.org/showthread.ph...04#post1363304

I ran into this problem again while outputting trimmed ts. Same thing. If you rename the file in the save as dialog box, dgindex doesn't automatically add the extension.

Saving a dgi file is fine. You can put whatever into the save as box and it will auto add the .dgi extension.

Guest · 30th June 2010, 13:08

It's not so simple. Suppose you do trimmed ts and enter "myfile", while the files myfile.trp and myfile.ts both already exist. And you want to append. How do I know which one to use? Or if just myfile.ts exists how do I know whether you want to make a new file or append to that one? And suppose someone *wants* a file with no extension? (In the case of DGI it is mandatory.) Finally, my view is if you replace a filename with one lacking an extension that was your intention. So I'm disinclined to do anything about this issue. It's not so hard to type an extension.

TinTime · 30th June 2010, 14:16

Quote:

Originally Posted by neuron2

The only possible decoding is on the GPU. if you see video it is decoded on the GPU.

Just out of curiosity how does this work for older GPUs? I'm using a pretty venerable 8600GT. As far as I know it offers full decoding of AVC but only partial decoding for VC-1 and MPEG-2. Have Nvidia also written CPU decoders for these that are invoked through CUDA? NB. I'm not aware of the technicalities here so I realise the question may not make sense

Sorry, I'm sure this has been asked before but I couldn't find the answer.

quantum5uicid3 · 30th June 2010, 14:18

starting with ver 2013, both the 32bit and 64bit versions of dgindexnv do not open mkv files on my computer. no error, just nothing happens after adding to the file list and clicking ok. if i use 2012, it works fine. i updated my nvidia drivers with no change. ive tried alot of files, so i don't think source matters.

vista x64 sp2
9600gt 257.21

cweb · 30th June 2010, 14:19

Quote:

Originally Posted by quantum5uicid3

starting with ver 2013, both the 32bit and 64bit versions of dgindexnv do not open mkv files on my computer. no error, just nothing happens after adding to the file list and clicking ok. if i use 2012, it works fine. i updated my nvidia drivers with no change. ive tried alot of files, so i don't think source matters.

vista x64 sp2
9600gt 257.21

Did you update your license file? See a few posts ago. Download the latest version before updating the license file though.

Guest · 30th June 2010, 14:19

Quote:

Originally Posted by TinTime

Just out of curiosity how does this work for older GPUs? I'm using a pretty venerable 8600GT. As far as I know it offers full decoding of AVC but only partial decoding for VC-1 and MPEG-2. Have Nvidia also written CPU decoders for these that are invoked through CUDA?

Yes, obviously any functions not done in the VP engine will be done in the driver software.

Guest · 30th June 2010, 14:22

Quote:

Originally Posted by quantum5uicid3

starting with ver 2013, both the 32bit and 64bit versions of dgindexnv do not open mkv files on my computer. no error, just nothing happens after adding to the file list and clicking ok. if i use 2012, it works fine. i updated my nvidia drivers with no change. ive tried alot of files, so i don't think source matters.

Don't you read release notes? Even the download link explains you have to regenerate your license. I'm really curious how you could have missed all that.

quantum5uicid3 · 30th June 2010, 14:34

i just generated a new file probably not even a month ago, i guess it was right before that. the bigger question i think, is why doesn't it throw an error if i need a new license file?

edit
that was it though, thank you.

hejhopp · 30th June 2010, 16:30

Hi neuron2
I use VideoReDo TVSuite V4 for cuting my .ts(h.264) HDTV files.
but when I cut at a I frame the first 22 frames gets green after I use DGDecNV. tested on a 50fps and a 25fps HDTV ts file. p and b looks to be OK too start a clip at. When I use DirectShowSource the clip's looks fine, no green frames.
Any idea why it's like this?

Guest · 30th June 2010, 16:59

Quote:

Originally Posted by hejhopp

Hi neuron2
I use VideoReDo TVSuite V4 for cuting my .ts(h.264) HDTV files.
but when I cut at a I frame the first 22 frames gets green after I use DGDecNV. tested on a 50fps and a 25fps HDTV ts file. p and b looks to be OK too start a clip at. When I use DirectShowSource the clip's looks fine, no green frames.
Any idea why it's like this?

Post a link to a sample source stream cut by VideoRedo that I can use to duplicate the issue. A JPG is useless.

hejhopp · 30th June 2010, 17:31

Quote:

Originally Posted by neuron2

Post a link to a sample source stream cut by VideoRedo that I can use to duplicate the issue. A JPG is useless.

here u go http://www.megaupload.com/?d=S4GFXP1N
hope it works.

adiabatic · 30th June 2010, 17:45

I'm just dropping in to give some feedback on the 64-bit binaries. So far so good!

I can't give direct speed comparisons because I was using an older 32-bit x264.exe (4 months old maybe) and the latest 64-bit x264.exe. With my usual AVS script (1080i -> 720p and colormatrix()) HDTV MPEG-2 to x264 conversions are a few fps faster but really it's coin toss as to if 32-bit or 64-bit is faster on my system. No matter really, either way I'm converting at 2x real time and that makes me happy!

Anyway Donald, the 2015 64-bit code is rock soild on my system. I'll test 2017 this weekend. You're updating versions faster than I can capture!!!!

Guest · 30th June 2010, 19:06

Quote:

Originally Posted by hejhopp

here u go http://www.megaupload.com/?d=S4GFXP1N
hope it works.

"The file you are trying to access is temporarily unavailable."

Please use mediafire.com

hejhopp · 30th June 2010, 19:42

Quote:

Originally Posted by neuron2

"The file you are trying to access is temporarily unavailable."

Please use mediafire.com

lets try this one.
http://download907.mediafire.com/wx1...myjj/test_i.ts

crl2007 · 30th June 2010, 21:50

I have a little problem here:

With v 2017. Win 7 x64, gtx 285, 257.21 drivers.

laserfan · 30th June 2010, 22:23

Quote:

Originally Posted by crl2007

I have a little problem here...

Did you get/install a new license key?

crl2007 · 30th June 2010, 22:29

Yes. The one for 2013.

Guest · 30th June 2010, 22:37

You need to regenerate your license. RTM.

crl2007 · 30th June 2010, 22:41

Thanks, it works now. We will have to regenerate the license with every program version ?

LE: I already used 4 licenses without me wanting. From 2 refreshes ( mozilla got in a not responding state ) i had 2 new licenses.

Guest · 30th June 2010, 23:40

If you read the recent posts you would know that:

Licenses will continue working going forward from 2015.

I plan to reset everybody's license count to 0.

30th June 2010, 05:52	#1821 \| Link
Audionut Registered User Join Date: Nov 2003 Posts: 1,281	Hi neuron2. Can I poke you with a stick about this : http://forum.doom9.org/showthread.ph...04#post1363304 I ran into this problem again while outputting trimmed ts. Same thing. If you rename the file in the save as dialog box, dgindex doesn't automatically add the extension. Saving a dgi file is fine. You can put whatever into the save as box and it will auto add the .dgi extension. __________________ http://www.7-zip.org/

30th June 2010, 13:08	#1822 \| Link
Guest Guest Join Date: Jan 2002 Posts: 21,901	It's not so simple. Suppose you do trimmed ts and enter "myfile", while the files myfile.trp and myfile.ts both already exist. And you want to append. How do I know which one to use? Or if just myfile.ts exists how do I know whether you want to make a new file or append to that one? And suppose someone wants a file with no extension? (In the case of DGI it is mandatory.) Finally, my view is if you replace a filename with one lacking an extension that was your intention. So I'm disinclined to do anything about this issue. It's not so hard to type an extension. Last edited by Guest; 30th June 2010 at 13:22.

30th June 2010, 14:34	#1828 \| Link
quantum5uicid3 Registered User Join Date: Oct 2009 Posts: 176	i just generated a new file probably not even a month ago, i guess it was right before that. the bigger question i think, is why doesn't it throw an error if i need a new license file? edit that was it though, thank you. Last edited by quantum5uicid3; 30th June 2010 at 14:38.

30th June 2010, 16:30	#1829 \| Link
hejhopp Registered User Join Date: Nov 2008 Posts: 8	Hi neuron2 I use VideoReDo TVSuite V4 for cuting my .ts(h.264) HDTV files. but when I cut at a I frame the first 22 frames gets green after I use DGDecNV. tested on a 50fps and a 25fps HDTV ts file. p and b looks to be OK too start a clip at. When I use DirectShowSource the clip's looks fine, no green frames. Any idea why it's like this? Attached Images

30th June 2010, 22:41	#1839 \| Link
crl2007 Registered User Join Date: Nov 2007 Posts: 650	Thanks, it works now. We will have to regenerate the license with every program version ? LE: I already used 4 licenses without me wanting. From 2 refreshes ( mozilla got in a not responding state ) i had 2 new licenses. Last edited by crl2007; 30th June 2010 at 22:44.

30th June 2010, 14:18	#1824 \| Link
quantum5uicid3 Registered User Join Date: Oct 2009 Posts: 176	starting with ver 2013, both the 32bit and 64bit versions of dgindexnv do not open mkv files on my computer. no error, just nothing happens after adding to the file list and clicking ok. if i use 2012, it works fine. i updated my nvidia drivers with no change. ive tried alot of files, so i don't think source matters. vista x64 sp2 9600gt 257.21

30th June 2010, 17:45	#1832 \| Link
adiabatic Registered User Join Date: Oct 2008 Posts: 17	I'm just dropping in to give some feedback on the 64-bit binaries. So far so good! I can't give direct speed comparisons because I was using an older 32-bit x264.exe (4 months old maybe) and the latest 64-bit x264.exe. With my usual AVS script (1080i -> 720p and colormatrix()) HDTV MPEG-2 to x264 conversions are a few fps faster but really it's coin toss as to if 32-bit or 64-bit is faster on my system. No matter really, either way I'm converting at 2x real time and that makes me happy! Anyway Donald, the 2015 64-bit code is rock soild on my system. I'll test 2017 this weekend. You're updating versions faster than I can capture!!!!

30th June 2010, 21:50	#1835 \| Link
crl2007 Registered User Join Date: Nov 2007 Posts: 650	I have a little problem here: With v 2017. Win 7 x64, gtx 285, 257.21 drivers.

30th June 2010, 22:29	#1837 \| Link
crl2007 Registered User Join Date: Nov 2007 Posts: 650	Yes. The one for 2013.

30th June 2010, 22:37	#1838 \| Link
Guest Guest Join Date: Jan 2002 Posts: 21,901	You need to regenerate your license. RTM.

30th June 2010, 23:40	#1840 \| Link
Guest Guest Join Date: Jan 2002 Posts: 21,901	If you read the recent posts you would know that: Licenses will continue working going forward from 2015. I plan to reset everybody's license count to 0. Last edited by Guest; 30th June 2010 at 23:45.