RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 340

Tolham · 27th January 2010, 05:38

Quote:

Originally Posted by Atak_Snajpera

@Tolham
Send me 100 MB sample (.m2ts file) to www.mediafire.com. Use DGsplit. Show me log file from Logs folder

i discovered the problem. my java installation was corrupt which was preventing BDsup2sub from doing it's job.

8ternity · 27th January 2010, 06:57

@awake33:

Personnaly i can suggest you to try theses things.

Uninstall all programs (avisynth, ffdshow, matroska). Reboot after this. Make a spot check if you don't have another directshow all-in-one application are installed in your system (like k-lite codecs pack, or any codec packages).

After download and/or install this:

- Latest DirectX Files ( http://www.microsoft.com/downloads/e...D-85FC422D1388 )
- Install ffdshow CLSID rev. (try mine are working right now rev.3176) ( http://sourceforge.net/projects/ffds...d.exe/download )
- Install matroska haali (available on the 1rst page of this thread) submited by Atak.
- Install avisynth 2.5.8 stable rev. ( http://sourceforge.net/projects/avis...8.exe/download )

Try with this and let us know if it is working.

I have experienced a trouble like you but with another program (HDConvertToX) wich i was using a ffdshow rev of CLSID, but i have re-installed ffdshow but rev of XXL. I never has or read something that said i was need to use ffdshow XXL with HDConvertToX. I was solved that trouble but for ripbot264, atak have recommand CLSID rev. (Not XXL or ICL-10).

Good Luck for your case!

joae · 27th January 2010, 09:31

I'm re-encoding a DVD to PS3 format, and the program stops within a few seconds at "muxing." I already encoded the DVD once with Ripbot264, but the AR was wrong.

I first thought it was using the old temp files and failed because of that, but it stops even after deleting the temp folder for the job.

Any ideas?

edit: encoding any other file works fine

prettyboy85712 · 27th January 2010, 13:35

Quote:

Originally Posted by joae

I'm re-encoding a DVD to PS3 format, and the program stops within a few seconds at "muxing." I already encoded the DVD once with Ripbot264, but the AR was wrong.

I first thought it was using the old temp files and failed because of that, but it stops even after deleting the temp folder for the job.

Any ideas?

edit: encoding any other file works fine

joae · 27th January 2010, 16:56

Quote:

Originally Posted by prettyboy85712

Not sure which file you mean, but here's two, hope they help

job7_EncodeVideoPass1:

Quote:

"C:\Program Files\RipBot264\tools\x264\x264_x86.exe" "C:\temp\RipBot264temp\job7\job7.avs" --crf 18 --fps 25 --min-keyint 25 --keyint 250 --sar 1:1 --level 4.0 --vbv-bufsize 30000 --vbv-maxrate 40000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --output "C:\temp\RipBot264temp\video.264"

and job7_MuxFiles

Quote:

"C:\Program Files\RipBot264\tools\mp4box\mp4box.exe" -tmp "C:\temp\RipBot264temp" -add "C:\temp\RipBot264temp\video.264":name="filename" -fps 25 -add "C:\temp\RipBot264temp\audio.aac":lang=und -mpeg4 -chap "C:\temp\RipBot264temp\job7\chapters.txt" -new "C:\[path]\filename.mp4"

eyekyu · 27th January 2010, 19:12

is there a difference using this software on a 64bit system

consultant · 27th January 2010, 23:01

To save time, while RipBot is encoding, I'm getting other jobs ready by ripping and demuxing them so when I add them ripbot doesn't have to demux.

I used eac3to to demux an m2ts file into a .h264 and .flac file (from PCM) and selected the .264 file. After a while ripbot came back with:

AVCSource: Could not open one of the input files.
(d:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

Atak_Snajpera · 27th January 2010, 23:14

I can only suggest to use mkv instead of raw .h264 file

consultant · 27th January 2010, 23:47

So it is not possible to submit a separate video and audio file for encoding and muxing by Ripbot264? There's a browse button on the audio filename in the second screen so I thought I would be able to submit a video file, then browse to my audio file? No possible?

Atak_Snajpera · 27th January 2010, 23:50

as you can see no. DGAVCDec didn't like your file. Period.

tulip001 · 28th January 2010, 10:58

Hi,

i have a Intel Core-2-Duo-Prozessor T7200 and when i encode an Bluray with RipBot the ETA is about 60hrs with 0,94 fps !!

I use the "[High 4.0] Bluray, Console" Profile with no modifications from v.1.15

Encoding the same Bluray with HDConvertToX shows me an ETA of 15hr using the x264 normal preset with crf of 22.

I am using Vists Home Premium x86.

Why is x264 encoding in RipBot so slow?

Ciao
Tulip001

prettyboy85712 · 28th January 2010, 13:45

Quote:

Originally Posted by tulip001

Hi,

i have a Intel Core-2-Duo-Prozessor T7200 and when i encode an Bluray with RipBot the ETA is about 60hrs with 0,94 fps !!

I use the "[High 4.0] Bluray, Console" Profile with no modifications from v.1.15

Encoding the same Bluray with HDConvertToX shows me an ETA of 15hr using the x264 normal preset with crf of 22.

I am using Vists Home Premium x86.

Why is x264 encoding in RipBot so slow?

Ciao
Tulip001

Post your script.

iSeries · 29th January 2010, 12:27

Hi,

Recently switched to Windows 7. I've just installed the latest RipBot and I'm getting an error after the the source file has been demuxed. After demuxing, it says 'Please wait, gathering information' for about 5 minutes, then an error comes up saying 'DirectShowSource : Timeout waiting for graph to start.
(D:\temp\RipBot264temp\job1\getinfo.avs, line 2)'. I've uninstalled/reinstalled ffdshow, avisynth and haali to no avail. Does anyone have any idea what could be causing this?

prettyboy85712 · 29th January 2010, 13:45

Quote:

Originally Posted by iSeries

Hi,

Recently switched to Windows 7. I've just installed the latest RipBot and I'm getting an error after the the source file has been demuxed. After demuxing, it says 'Please wait, gathering information' for about 5 minutes, then an error comes up saying 'DirectShowSource : Timeout waiting for graph to start.
(D:\temp\RipBot264temp\job1\getinfo.avs, line 2)'. I've uninstalled/reinstalled ffdshow, avisynth and haali to no avail. Does anyone have any idea what could be causing this?

What version of Haali to you have installed?

iSeries · 29th January 2010, 14:20

@ prettyboy85712 - I have the latest one as downloaded from http://haali.su/mkv/. In the 'About' properties it says 1.9.355.21.

prettyboy85712 · 29th January 2010, 14:58

Quote:

Originally Posted by iSeries

@ prettyboy85712 - I have the latest one as downloaded from http://haali.su/mkv/. In the 'About' properties it says 1.9.355.21.

Don't use that version. Use 19/12/2009.

dbone1026 · 29th January 2010, 15:31

Quote:

Originally Posted by prettyboy85712

Don't use that version. Use 19/12/2009.

Isnt the latest one on the haali site the 19/12/2009 version?

Atak_Snajpera · 29th January 2010, 15:36

have you read first post?

iSeries · 29th January 2010, 17:31

Yes I've read the first post. All it says in the first post is the latest Haali will not work with VC1 .m2ts files. However the source file is already remuxed into MKV, and the video codec is AVC not VC1. So therefore I assumed this advice was not applicable here.

pacaveli211 · 29th January 2010, 19:45

I have the latest Haali, vc1 files inside m2ts will just not play. like if I try to play an m2ts with MPC (that's setup to use haali instead of the default codec) it will play just the audio and not the video.
I can still process vc1/m2ts fine through ripbot264. it just demuxes the vc1 into an mkv anyways (I assume that's what it's always done as ripbot doesn't recognize raw vc1)
so the only thing the new haali will prevent you from doing is playin vc1 inside m2ts

27th January 2010, 06:57	#6782 \| Link
8ternity Registered User Join Date: May 2008 Location: At Home Posts: 403	@awake33: Personnaly i can suggest you to try theses things. Uninstall all programs (avisynth, ffdshow, matroska). Reboot after this. Make a spot check if you don't have another directshow all-in-one application are installed in your system (like k-lite codecs pack, or any codec packages). After download and/or install this: - Latest DirectX Files ( http://www.microsoft.com/downloads/e...D-85FC422D1388 ) - Install ffdshow CLSID rev. (try mine are working right now rev.3176) ( http://sourceforge.net/projects/ffds...d.exe/download ) - Install matroska haali (available on the 1rst page of this thread) submited by Atak. - Install avisynth 2.5.8 stable rev. ( http://sourceforge.net/projects/avis...8.exe/download ) Try with this and let us know if it is working. I have experienced a trouble like you but with another program (HDConvertToX) wich i was using a ffdshow rev of CLSID, but i have re-installed ffdshow but rev of XXL. I never has or read something that said i was need to use ffdshow XXL with HDConvertToX. I was solved that trouble but for ripbot264, atak have recommand CLSID rev. (Not XXL or ICL-10). Good Luck for your case! __________________ PC; 7.5 on 7.9 (Windows Experience Rating) on the lower rating. Last edited by 8ternity; 27th January 2010 at 07:00.

27th January 2010, 09:31	#6783 \| Link
joae Registered User Join Date: Sep 2009 Posts: 10	Ripbot264 stops immediately after starting I'm re-encoding a DVD to PS3 format, and the program stops within a few seconds at "muxing." I already encoded the DVD once with Ripbot264, but the AR was wrong. I first thought it was using the old temp files and failed because of that, but it stops even after deleting the temp folder for the job. Any ideas? edit: encoding any other file works fine Last edited by joae; 27th January 2010 at 10:20.

27th January 2010, 23:14	#6788 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	I can only suggest to use mkv instead of raw .h264 file __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

27th January 2010, 23:50	#6790 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	as you can see no. DGAVCDec didn't like your file. Period. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

28th January 2010, 10:58	#6791 \| Link
tulip001 Registered User Join Date: Jan 2010 Posts: 4	Slower than HDC Hi, i have a Intel Core-2-Duo-Prozessor T7200 and when i encode an Bluray with RipBot the ETA is about 60hrs with 0,94 fps !! I use the "[High 4.0] Bluray, Console" Profile with no modifications from v.1.15 Encoding the same Bluray with HDConvertToX shows me an ETA of 15hr using the x264 normal preset with crf of 22. I am using Vists Home Premium x86. Why is x264 encoding in RipBot so slow? Ciao Tulip001

27th January 2010, 19:12	#6786 \| Link
eyekyu Registered User Join Date: Feb 2008 Posts: 19	is there a difference using this software on a 64bit system

27th January 2010, 23:01	#6787 \| Link
consultant Registered User Join Date: May 2004 Posts: 147	To save time, while RipBot is encoding, I'm getting other jobs ready by ripping and demuxing them so when I add them ripbot doesn't have to demux. I used eac3to to demux an m2ts file into a .h264 and .flac file (from PCM) and selected the .264 file. After a while ripbot came back with: AVCSource: Could not open one of the input files. (d:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

27th January 2010, 23:47	#6789 \| Link
consultant Registered User Join Date: May 2004 Posts: 147	So it is not possible to submit a separate video and audio file for encoding and muxing by Ripbot264? There's a browse button on the audio filename in the second screen so I thought I would be able to submit a video file, then browse to my audio file? No possible?

29th January 2010, 12:27	#6793 \| Link
iSeries Registered User Join Date: Jan 2009 Posts: 625	Hi, Recently switched to Windows 7. I've just installed the latest RipBot and I'm getting an error after the the source file has been demuxed. After demuxing, it says 'Please wait, gathering information' for about 5 minutes, then an error comes up saying 'DirectShowSource : Timeout waiting for graph to start. (D:\temp\RipBot264temp\job1\getinfo.avs, line 2)'. I've uninstalled/reinstalled ffdshow, avisynth and haali to no avail. Does anyone have any idea what could be causing this?

29th January 2010, 14:20	#6795 \| Link
iSeries Registered User Join Date: Jan 2009 Posts: 625	@ prettyboy85712 - I have the latest one as downloaded from http://haali.su/mkv/. In the 'About' properties it says 1.9.355.21.

29th January 2010, 15:36	#6798 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	have you read first post? __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

29th January 2010, 17:31	#6799 \| Link
iSeries Registered User Join Date: Jan 2009 Posts: 625	Yes I've read the first post. All it says in the first post is the latest Haali will not work with VC1 .m2ts files. However the source file is already remuxed into MKV, and the video codec is AVC not VC1. So therefore I assumed this advice was not applicable here.

29th January 2010, 19:45	#6800 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	I have the latest Haali, vc1 files inside m2ts will just not play. like if I try to play an m2ts with MPC (that's setup to use haali instead of the default codec) it will play just the audio and not the video. I can still process vc1/m2ts fine through ripbot264. it just demuxes the vc1 into an mkv anyways (I assume that's what it's always done as ripbot doesn't recognize raw vc1) so the only thing the new haali will prevent you from doing is playin vc1 inside m2ts