error message on DVD Shrink

dvon76 · 21st January 2007, 10:36

Can anyone help me out with an error message that I have just started getting on my dvd shrink. It runs through the whole process and then at the end it has a huge list of basically unreadable text (to me anyway) it just started doing this and the last time, it told me that it was a session fixation error and your dvd did not burn. Any help would be appreciated. I will try and burn the same dvd tonight and if no one has any answers then I will paste the whole error box contents on here. Thanks

linx05 · 21st January 2007, 13:31

From the little information you gave, it could be a problem with your burner or you've got a bad disc. Show us all the error messages in full and tell us the name of the DVD with it's Region Code (just in case).

blutach · 21st January 2007, 15:02

Transferred to DVD Burning.

Check media quality (use Verbatims or Taiyo Yudens only), firmware is up to date, DMA and burn speed.

Regards

dvon76 · 23rd January 2007, 07:46

Quote:

Originally Posted by linx05

From the little information you gave, it could be a problem with your burner or you've got a bad disc. Show us all the error messages in full and tell us the name of the DVD with it's Region Code (just in case).

1C80-0000-19E5-MA2X-4003-9595-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0

Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : ST3160812AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 5 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652L atapi Port 5 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
TSSTcorp CD/DVDW TS-H652L F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 446MB (457200kB)
Free physical memory: 225MB (231176kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.1.2007
NeroAPI
12:38:38 AM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started

12:38:38 AM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)

12:38:38 AM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

12:38:38 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:38:38 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:38:38 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

12:38:38 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

12:38:38 AM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

12:38:39 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

12:38:39 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

12:38:39 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:38:39 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:38:39 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

12:38:39 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2286112 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286112 | 0 | 0x00
2286112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:38:39 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:38:39 AM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

12:38:39 AM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

12:38:39 AM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

12:38:39 AM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 16x (22,160 KB/s)

12:38:39 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:38:39 AM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

12:38:39 AM #22 Text 0 File DVDR.cpp, Line 6796
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

12:38:39 AM #23 CDR -1211 File DVDR.cpp, Line 6154
Book Type set to: DVD-ROM

12:38:39 AM #24 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

12:41:12 AM #25 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x22050080: Len x10000
0x01 00 02 00 75 00 00 00 84 DD F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 53 4F 50 52 41 4E 4F
0x53 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:41:12 AM #26 CDR -1114 File Writer.cpp, Line 299
Reset occurred
E: LITE-ON DVDRW SOHW-1693S

12:41:13 AM #27 SPTI -1080 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A

12:41:13 AM #28 SPTI -1080 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A

12:41:13 AM #29 Phase 127 File APIProgress.cpp, Line 282
Generating DVD high compatibility borders

12:41:14 AM #30 Text 0 File DVDR.cpp, Line 6796
Drive: LITE-ON DVDRW SOHW-1693S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0

12:41:14 AM #31 CDR -1080 File WriterStatus.cpp, Line 162
Disc not present
E: LITE-ON DVDRW SOHW-1693S

12:41:14 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

12:41:14 AM #33 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 16x (22,160 KB/s)

12:41:15 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

12:41:15 AM #35 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

12:41:15 AM #36 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:41:16 AM #37 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

12:41:17 AM #38 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 11:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.20a, size=46080 bytes, created 3/9/2006 12:00:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I was trying to back up The Sopranos Season one disc one its a region 1 dvd
Does this help any?

CWR03 · 23rd January 2007, 08:04

Yes, I believe The Sopranos has an advanced copy protection scheme. Rip the disk using RipIt4Me in full disk mode.

dvon76 · 24th January 2007, 11:16

Quote:

Originally Posted by blutach

Transferred to DVD Burning.

Check media quality (use Verbatims or Taiyo Yudens only), firmware is up to date, DMA and burn speed.

Regards

I know I should be asking this in the newbie section but What is DMA and how do I check it. also by firmware do you mean DVD shrink or Rip it 4 Me or a program like that

21st January 2007, 10:36	#1 \| Link
dvon76 Registered User Join Date: Mar 2006 Posts: 30	error message on DVD Shrink Can anyone help me out with an error message that I have just started getting on my dvd shrink. It runs through the whole process and then at the end it has a huge list of basically unreadable text (to me anyway) it just started doing this and the last time, it told me that it was a session fixation error and your dvd did not burn. Any help would be appreciated. I will try and burn the same dvd tonight and if no one has any answers then I will paste the whole error box contents on here. Thanks

21st January 2007, 13:31	#2 \| Link
linx05 Registered User Join Date: Mar 2005 Location: Region 4 Posts: 518	From the little information you gave, it could be a problem with your burner or you've got a bad disc. Show us all the error messages in full and tell us the name of the DVD with it's Region Code (just in case). __________________ AnyDVD \| DVD Decrypter \| PgcEdit \| VobBlanker \| DVD Rebuilder \| ImgBurn

21st January 2007, 15:02	#3 \| Link
blutach Country Member Join Date: Sep 2004 Location: is everything! Posts: 6,499	Transferred to DVD Burning. Check media quality (use Verbatims or Taiyo Yudens only), firmware is up to date, DMA and burn speed. Regards __________________ Les Only use genuine Verbatim or Taiyo Yuden media.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

23rd January 2007, 08:04	#5 \| Link
CWR03 Custom User Title Join Date: Mar 2005 Posts: 3,733	Yes, I believe The Sopranos has an advanced copy protection scheme. Rip the disk using RipIt4Me in full disk mode.