smartLabs tsMuxeR: Transport Stream muxer - Page 90

hvda · 8th July 2008, 13:21

@Roman76r
I would like to report following problem that occur when opening transport stream (.ts) files, containing satellite HD transmission captures of Channel Arte HD (on 19.2E TP 11914 SR 27500 FEC 9/10) : tsMuxeR 1.8.4(b) does not recognize video track (AVC Video stream) and second audio track (MPEG Layer2). (Note: program TsRemux V.0.0.21.2 recognizes 1 Video AVC stream and 2 audio streams MPEG Layer2).

Conditions:
- Captures done with Dreambox DM800HD Gemini 3.60 image. Duration of the captures : 5minutes.
- TS files tested with tsMuxeR version 1.6.3b and with version 1.8.4b.

I hope this information can be useful to you in order to improve the tsMuxeR program.
If you are interested, I could upload a sample (tssplitted) of those captures on a server of your choice, for analysis (please specify minimum sample size needed).

- Information gathered with MediaInfo program for Arte HD capture.
General
ID : 3F3
Complete name : E:\DVBS-TS\ArteHD_5min.ts
Format : MPEG-TS
File size : 434 MiB
Duration : 5mn 6s
Overal bit rate : 11.9 Mbps

Video
ID : 6210 (0x1842)
Menu ID : 11120 (0x2B70)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Duration : 5mn 6s
Bit rate : 10.9 Mbps
Width : 1280 pixels
Height : 720 pixels
Display aspect ratio : 16/9
Frame rate : 50.000 fps
Colorimetry : 4:2:0
Scan type : Progressive
Language : German
Language_More : Clean effects

Audio #1
ID : 6221 (0x184D)
Menu ID : 11120 (0x2B70)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Resolution : 16 bits
Video delay : -919ms
Language : German
Language_More : Clean effects

Audio #2
ID : 6222 (0x184E)
Menu ID : 11120 (0x2B70)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Resolution : 16 bits
Video delay : -983ms
Language : French
Language_More : Clean effects

Text
ID : 6230 (0x1856)
Menu ID : 11120 (0x2B70)
Format : Teletext
Language : German
Language_More : Clean effects

cutadel · 11th July 2008, 12:54

hvda,
this problem is well known since the second EinsFestival Hd transmission in 720p. I had informed the author of tsMuxer about that, but received unfortunately no reply in any form.
The problem is, that something is rejecting tsMuxer to import the video stream. With audio i have no problems.
Lets hope, that somebody now can help. A solution would be great, because only with tsMuxer created (mini) bluray discs (on DVD+R,DVD+RW, BD-R/RE) play the captured hd videos on my Panasonic BD-30.

Butterfly666 · 11th July 2008, 23:23

Is it possible 2 put in the next update more effects for the subtitles like shadows?

Because now it's hard to reed in very light scenes..

dorati · 14th July 2008, 10:43

Is the development of TSmuxer dead?

I don't see roman76r a long time online ?!?

DoomBot · 14th July 2008, 12:41

Sure looks like it to me.

n0mag!c · 14th July 2008, 15:57

Quote:

Originally Posted by rica

When i remuxed vc1 and ac3 into TS with TS muxer and renamed srt created with supread with the same name of muxed ts and put them in the same folder, i can easily watch suptitle with MPC-HC.

What if i cut remuxed video, audio and srt with TSMuxer?

When you're watching your original .TS-file, then subtitles are rendered with DirectVobSub.
When you're muxing .SRT-file with tsmuxer, it renderes text to PGS. So SupRead can't recognize it. That's my guess.

EPiPH0NE · 14th July 2008, 18:36

Quote:

Originally Posted by dorati

Is the development of TSmuxer dead?

I don't see roman76r a long time online ?!?

tsMuxeR is free from the company roman76 runs/works for so I would guess he either left the company or is happy with it's current state as are their paying customers for which tsMuxeR is bundled with their commercial products. Just a guess.........

jj666 · 14th July 2008, 18:52

It's a shame if development has stopped as the source wasn't available for any one else to pick up. It's certainly a utility I use daily and the ease of use of the program certainly isn't replaceable easily with any other utility. Would certainly be willing to pay if it turned to a commercial utility or donate if such an option was available :-)

Cheers,

-jj-

Nullity · 14th July 2008, 20:17

It would be a shame if development of tsMuxer has stopped as it is probably the most useful program of its kind out there.

I don't know if anyone else has noticed, but there is a slightly newer version (1.8.5) hosted on his company's website that was not posted about here at doom9:

http://www.smlabs.net/tsMuxer/tsMuxeR_1.8.5(b).zip

I downloaded it, but haven't tried it yet. There is no changelog available, so I'm not sure what has been fixed/changed.

laserfan · 14th July 2008, 20:57

Quote:

Originally Posted by Nullity

I downloaded it, but haven't tried it yet. There is no changelog available, so I'm not sure what has been fixed/changed.

No change to Readme, but the two .exe files are 3 days newer. On launch it says 1.85 w/no (b) beta indication. Maybe they just said "this is it" and it's 1.84(b) w/o the beta indication...?

rica · 14th July 2008, 21:24

Quote:

Originally Posted by n0mag!c

When you're watching your original .TS-file, then subtitles are rendered with DirectVobSub.
When you're muxing .SRT-file with tsmuxer, it renderes text to PGS. So SupRead can't recognize it. That's my guess.

Hi i just remux audio and video. Leave srt as seperate file.

Unregister DirectVobSub and here is the way i go:

http://forum.doom9.org/showthread.ph...93#post1157293

DXVA with subtitles:

The working graph at the back stage:

BTW, for BD you have to use TSMuxer for demuxing subtitles and you will get sup which SupReader may recognize.

EPiPH0NE · 14th July 2008, 22:36

Quote:

Originally Posted by Nullity

It would be a shame if development of tsMuxer has stopped as it is probably the most useful program of its kind out there.

I don't know if anyone else has noticed, but there is a slightly newer version (1.8.5) hosted on his company's website that was not posted about here at doom9:

http://www.smlabs.net/tsMuxer/tsMuxeR_1.8.5(b).zip

I downloaded it, but haven't tried it yet. There is no changelog available, so I'm not sure what has been fixed/changed.

Thnx for the heads up

dieselgg · 16th July 2008, 01:22

I am getting the error: Some tracks not recognized. This track ignored for the following an .mkv vide file:

- codec .H264 Profile High @5.1 Resolution 1280:720p
- codec AC3 Bit ratekps 448kbps sample rate 48kHz channels 6

Is the problem with AC3 audio track having a bitrate of 448kbps or is it something else?

If the bit rate is the problem, what would be the best way to correct this?

EPiPH0NE · 16th July 2008, 03:36

Quote:

Originally Posted by dieselgg

I am getting the error: Some tracks not recognized. This track ignored for the following an .mkv vide file:

- codec .H264 Profile High @5.1 Resolution 1280:720p
- codec AC3 Bit ratekps 448kbps sample rate 48kHz channels 6

Is the problem with AC3 audio track having a bitrate of 448kbps or is it something else?

If the bit rate is the problem, what would be the best way to correct this?

Maybe try demuxing the MKV with MKVextract and then feed the raw streams into tsMuxeR? May/may not work.

dieselgg · 16th July 2008, 04:13

Quote:

Originally Posted by EPiPH0NE

Maybe try demuxing the MKV with MKVextract and then feed the raw streams into tsMuxeR? May/may not work.

Thanks for the reply I will give it a try or use the front end GUI AVCHD Disk Creator app.

By the way which is a better format for the PS3 when using tsMuxerR, m2ts or AVCHD?

Any advantage or disadvantage to using either.

woah! · 16th July 2008, 05:59

Quote:

Originally Posted by dieselgg

I am getting the error: Some tracks not recognized. This track ignored for the following an .mkv vide file:

- codec .H264 Profile High @5.1 Resolution 1280:720p
- codec AC3 Bit ratekps 448kbps sample rate 48kHz channels 6

Is the problem with AC3 audio track having a bitrate of 448kbps or is it something else?

If the bit rate is the problem, what would be the best way to correct this?

profile high has to be 4.1 at most i believe ...

EPiPH0NE · 16th July 2008, 07:50

Quote:

Originally Posted by woah!

profile high has to be 4.1 at most i believe ...

If that's the case you could try running the raw stream through h264info and change the header to read L4.1 but that may/may not work. Worth a shot unless there's a quicker way.

B4tm4n · 16th July 2008, 12:40

Quote:

Originally Posted by dieselgg

I am getting the error: Some tracks not recognized. This track ignored for the following an .mkv vide file:

- codec .H264 Profile High @5.1 Resolution 1280:720p
- codec AC3 Bit ratekps 448kbps sample rate 48kHz channels 6

Is the problem with AC3 audio track having a bitrate of 448kbps or is it something else?

If the bit rate is the problem, what would be the best way to correct this?

I've had this problem in the past when the AC3 track isn't recognised. Its not a Tsmuxer problem ( I think ) just the headers on the audio track are screwed.
Use mkv merge and gut a couple of seconds of the begining of the film and that should do the trick.
The other way is to demux the audio track and re-encode it and then remux it back in.

Good luck.

Quote:

Originally Posted by woah!

profile high has to be 4.1 at most i believe ...

I don't know if you use a PS3 but with the latest firmware 2.40+ it will take 5.1 high profile.

dieselgg · 16th July 2008, 13:09

I agree, I may have to remux the audio, perhaps the audio bitrate is too high. The Maximum video bitrate for Blueray is 40000 kbps. I know for sure that the error is not because the profile high is 5.1. I have inserted a different video file with a profile high of 5.1, audio bitrate of 384kbps and there were no errors.

I used GUI AVCHD Disk Creator app which is a front end gui for TSMuxer. I converted the video file, which was giving me the problems and converted it to AVCHD without any errors. I will try out the disk when I get a chance.

survivant001 · 16th July 2008, 13:22

Quote:

Originally Posted by B4tm4n

I don't know if you use a PS3 but with the latest firmware 2.40+ it will take 5.1 high profile.

is it official that the 2.40 support 5.1 profile ?

8th July 2008, 13:21	#1781 \| Link
hvda Registered User Join Date: Jan 2008 Posts: 5	tsMuxeR does not recognize video and/or audio tracks in HD transport streams transmit @Roman76r I would like to report following problem that occur when opening transport stream (.ts) files, containing satellite HD transmission captures of Channel Arte HD (on 19.2E TP 11914 SR 27500 FEC 9/10) : tsMuxeR 1.8.4(b) does not recognize video track (AVC Video stream) and second audio track (MPEG Layer2). (Note: program TsRemux V.0.0.21.2 recognizes 1 Video AVC stream and 2 audio streams MPEG Layer2). Conditions: - Captures done with Dreambox DM800HD Gemini 3.60 image. Duration of the captures : 5minutes. - TS files tested with tsMuxeR version 1.6.3b and with version 1.8.4b. I hope this information can be useful to you in order to improve the tsMuxeR program. If you are interested, I could upload a sample (tssplitted) of those captures on a server of your choice, for analysis (please specify minimum sample size needed). - Information gathered with MediaInfo program for Arte HD capture. General ID : 3F3 Complete name : E:\DVBS-TS\ArteHD_5min.ts Format : MPEG-TS File size : 434 MiB Duration : 5mn 6s Overal bit rate : 11.9 Mbps Video ID : 6210 (0x1842) Menu ID : 11120 (0x2B70) Format : AVC Format/Info : Advanced Video Codec Format profile : Main@L4.0 Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Duration : 5mn 6s Bit rate : 10.9 Mbps Width : 1280 pixels Height : 720 pixels Display aspect ratio : 16/9 Frame rate : 50.000 fps Colorimetry : 4:2:0 Scan type : Progressive Language : German Language_More : Clean effects Audio #1 ID : 6221 (0x184D) Menu ID : 11120 (0x2B70) Format : MPEG Audio Format version : Version 1 Format profile : Layer 2 Bit rate mode : Constant Bit rate : 256 Kbps Channel(s) : 2 channels Sampling rate : 48.0 KHz Resolution : 16 bits Video delay : -919ms Language : German Language_More : Clean effects Audio #2 ID : 6222 (0x184E) Menu ID : 11120 (0x2B70) Format : MPEG Audio Format version : Version 1 Format profile : Layer 2 Bit rate mode : Constant Bit rate : 256 Kbps Channel(s) : 2 channels Sampling rate : 48.0 KHz Resolution : 16 bits Video delay : -983ms Language : French Language_More : Clean effects Text ID : 6230 (0x1856) Menu ID : 11120 (0x2B70) Format : Teletext Language : German Language_More : Clean effects

16th July 2008, 01:22	#1793 \| Link
dieselgg Registered User Join Date: Sep 2007 Posts: 13	Track not recognized for AC3 Bitrate 48kHz I am getting the error: Some tracks not recognized. This track ignored for the following an .mkv vide file: - codec .H264 Profile High @5.1 Resolution 1280:720p - codec AC3 Bit ratekps 448kbps sample rate 48kHz channels 6 Is the problem with AC3 audio track having a bitrate of 448kbps or is it something else? If the bit rate is the problem, what would be the best way to correct this? Last edited by dieselgg; 16th July 2008 at 01:28.

16th July 2008, 13:09	#1799 \| Link
dieselgg Registered User Join Date: Sep 2007 Posts: 13	I agree, I may have to remux the audio, perhaps the audio bitrate is too high. The Maximum video bitrate for Blueray is 40000 kbps. I know for sure that the error is not because the profile high is 5.1. I have inserted a different video file with a profile high of 5.1, audio bitrate of 384kbps and there were no errors. I used GUI AVCHD Disk Creator app which is a front end gui for TSMuxer. I converted the video file, which was giving me the problems and converted it to AVCHD without any errors. I will try out the disk when I get a chance. Last edited by dieselgg; 16th July 2008 at 13:28.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11th July 2008, 12:54	#1782 \| Link
cutadel Registered User Join Date: May 2008 Posts: 4	hvda, this problem is well known since the second EinsFestival Hd transmission in 720p. I had informed the author of tsMuxer about that, but received unfortunately no reply in any form. The problem is, that something is rejecting tsMuxer to import the video stream. With audio i have no problems. Lets hope, that somebody now can help. A solution would be great, because only with tsMuxer created (mini) bluray discs (on DVD+R,DVD+RW, BD-R/RE) play the captured hd videos on my Panasonic BD-30.

11th July 2008, 23:23	#1783 \| Link
Butterfly666 Registered User Join Date: May 2008 Posts: 54	Is it possible 2 put in the next update more effects for the subtitles like shadows? Because now it's hard to reed in very light scenes..

14th July 2008, 10:43	#1784 \| Link
dorati Registered User Join Date: Oct 2002 Posts: 70	Is the development of TSmuxer dead? I don't see roman76r a long time online ?!?

14th July 2008, 12:41	#1785 \| Link
DoomBot Registered User Join Date: Jan 2008 Posts: 98	Sure looks like it to me.

14th July 2008, 18:52	#1788 \| Link
jj666 Registered User Join Date: May 2003 Posts: 153	It's a shame if development has stopped as the source wasn't available for any one else to pick up. It's certainly a utility I use daily and the ease of use of the program certainly isn't replaceable easily with any other utility. Would certainly be willing to pay if it turned to a commercial utility or donate if such an option was available :-) Cheers, -jj-

14th July 2008, 20:17	#1789 \| Link
Nullity Registered User Join Date: Mar 2007 Posts: 46	It would be a shame if development of tsMuxer has stopped as it is probably the most useful program of its kind out there. I don't know if anyone else has noticed, but there is a slightly newer version (1.8.5) hosted on his company's website that was not posted about here at doom9: http://www.smlabs.net/tsMuxer/tsMuxeR_1.8.5(b).zip I downloaded it, but haven't tried it yet. There is no changelog available, so I'm not sure what has been fixed/changed.