Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
20th December 2002, 16:56 | #1 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
Staircase effect on CX23881 card ?? how to avoid it ??
not sure if this should go in newbies or here, so here it is (i am sure it will be moved otherwise)
with my new CX23881 chip based card i can get some good quality, but.... i found toinight running some tests the best res is 320x240 384x288 is a better quality, but i get these damn lines, like a "digital" look to it. @ 640x480, its all over the place, of course 240x180 removes these lines completely, but the quality is, of course, getting closer to the old 8-bit chipped based cards http://DavidWard.myvnc.com/lines.jpg what could this be and any filters for VD that could solve it?? i capture with iuVCR, as the software that came with sux and theres limited programs that suport this new chipset thanx
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! Last edited by DaveQB; 12th January 2003 at 16:53. |
20th December 2002, 17:33 | #2 | Link |
Achtung Baby
Join Date: Aug 2002
Location: Dublin
Posts: 625
|
It is interlaced.
Use a De-interlace filter in VurtualDub or AVS filter later. Search for interlace as this would surly have benn discussed before. Good luck. Edge
__________________
http://www.cellular-news.com/images/...il_Ireland.gif |
20th December 2002, 17:56 | #3 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
yeah thought exactly that, but no,
the deinterlace in VD makes the picture so bad its terrible
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
20th December 2002, 18:20 | #4 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
ok it worked this time,
i thinks it all to do with res i ran the Deinterlace @ 640x480 and it got ride of the lines, but a little blurrier. so i figured if its interlaced then it need to be deinterlaced even @ 320x240 which is showing no lines anyway, but that simply makes the picture blurry, doesnt help the coz my question now is, is it possible to make a Capture Card capture interlaced @ certain res and not interlaced @ other resolutions ??? any light shed on this subject, much appreciated
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
21st December 2002, 11:11 | #5 | Link |
Registered User
Join Date: Sep 2002
Posts: 157
|
Every capture card will cause interlace if captured with a vertical res. higher than half of max. possible. E.g., you'll get interlaced video for PAL if the vertical res is > 288. There is some old fashioned material(old movies, for example) which is noninterlaced anyway, so it won't be captured interlaced no matter which res.
If you want to encode the captured video to vcd, you can configure VDub to discard one field, as you won't need it. Then resize the picture to vcd res. |
21st December 2002, 12:11 | #6 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
hmmm okee, very interesting.
its max res as stated on the site and box is 720x576 576/2 = 288 (duh!) so my 320x240 is the best res to use ?? it doesnt have the lines at all, but isnt as clear as 384x288 384x288 cap ran through VD with Deinterlace filter on does end up somewhat similar to a direct 320x240 cap hmmmm all good to learn, back to some more testing ..... thanx
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
22nd December 2002, 03:05 | #8 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
oh, hmmm
but theres the interlacing lines like my eg vid up there ^ just not as bad, 320x240 removes all interlace effects, i am confused now
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
22nd December 2002, 15:25 | #9 | Link |
Banned
Join Date: Aug 2002
Location: Croatia [local name:Hrvatska]
Posts: 551
|
i see you're from australia,and therefore on PAL
and therefore you can consider only 2 (two) vertical resolutions: 288 or 576 ! ( you can toy with horizontal resolution (352,480 etc), but using on capture something different than those two vertical resolutions i DON'T reccomend- for PAL off course ) use 576 and you worries are gone! (not to go deeply into explanation why 480 is wron for PAL etc. ) cheers Ivo |
22nd December 2002, 15:46 | #10 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
hmmm, but i have found that 320x240 is the highest i can capture at without getting the interlacing effects all over the screen.
384x288 produces them, along with every res above that is that just this card in particular or is that normal ?!?! should i therefore, cap @ 384x288 and then run deinterlace over it ?? the largest res it will allow in iuVCR is 640x480
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
22nd December 2002, 18:57 | #11 | Link |
Banned
Join Date: Aug 2002
Location: Croatia [local name:Hrvatska]
Posts: 551
|
driver issues for that card have ben discussed recently here
to some extent....... search for those(in thread "samples" you'll find some people that have the card,etc._i don't know if they'll be willing to help,probably yes...also on recent therad on "best capture card" something,there some more........few people have it,and even fewer got it to work properly on their systems.... ),& see if you can get it to work on hi-res: 352x288 is not good enough if you're gonna ask me, 640x480 is flat-wrong for PAL input ( that's sure as hell! ) if 288 is all you can get,you better off,and use bt8x8 on 720x576 (or so) instead....... (but i guess by now you know 288 is lousy on that device,and on any bt device really..) btw: 288 CAN'T be interlaced ,as in that mode card disregards one field.....(if you selected PAL for input..if you selected NTSC and then tried it then....well.......) iuVCR has some funny resolution pick-up issues etc.,and also when it makes segmentation (if you're on FAT32) it drops some content on those spots..... [if you think that you saw interlacing on 288 then send screenshot,and i'll try to tell you what happened....off course your card has to be in PAl mode (jumpers on card itself,etc.) ] |
5th January 2003, 14:42 | #12 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
heres a pic @ 384x288 see the funny lines on the far side line ?? @ 320x240 those funny lines have gone, but so has picture quality i cant decide which card to sell, this based on the new 10-bit ship or my Winfast based on the old 8-bit chip i think the future is the CX23881 but right perhaps not ?!?1
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
5th January 2003, 15:06 | #13 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
368x276 see the funny lookin lines ???
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
6th January 2003, 01:57 | #15 | Link | |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
Quote:
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
|
6th January 2003, 14:12 | #17 | Link |
Theora and Mkv fan! :)
Join Date: Jun 2002
Location: Sydney
Posts: 347
|
i ran several tests and found VD's own deinterlace to be better then any other plugin filter i could find (including SmartDeinterlacer)
heres a good eg of those lines, it looks like compression, but its not, they actually move in like a wavy pattern, happens alot on edges and especially computer generated graphics
__________________
Can't we all just get along? Opty 146 @ 2.5Ghz || nForce3 ||1x330 + 3x120gig || CX23881 Capture Card OCAU || My blog Proud to be an Aussie! |
7th January 2003, 03:14 | #19 | Link |
Registered User
Join Date: Dec 2001
Posts: 234
|
I really suggest you use 640x480, then edit it with AVISynth2 and deinterlace it with Donald Graft's Decomb plugin. It'll retain sharpness of both fields of the interlaced frame, and avisynth just rocks for editing.
Use something like this: Code:
AVISource("cap_0.00.avi")+AVISource("cap_0.01.avi") LoadPlugin("C:\Program Files\AviSynth2\plugins\decomb.dll") Telecide(guide=1) Trim(framehere,framehere)++Trim(framehere,framehere) Decimate(cycle=5) Crop(0,4,640,476) BilinearResize(512,384) Amplify(2.2) # increases the audio volume |
7th January 2003, 03:19 | #20 | Link |
Registered User
Join Date: Apr 2002
Posts: 272
|
the decomb script above is for IVTC and is not appropriate for PAL;
instead you should just try telecide() or fielddeinterlace() daveqb - can't really see these jaggies properly - they are either caused by bad deinterlacing or a poor resizing algorithim give the avisynth deinterlacing filter tomsmocomp a try |
Thread Tools | Search this Thread |
Display Modes | |
|
|