smartLabs tsMuxeR: Transport Stream muxer - Page 43

dd03pehe · 30th March 2008, 17:30

Quote:

Originally Posted by roman76r

chamb_link

Yes. I have started to improve subtitles support in tsMuxR.
I plan the following:
1. Add .srt subtitles support and ability to convert srt to PGS
2. Add dvd subtitles support and ability to convert srt to SUB.
3. Ability to convert SUB to PGS
4. Add HD-DVD subtitles, ability to convert HD-DVD subtitles to DVD SUB or PGS.
5. Add other txt based subtitles

Very nice!

dirkr · 30th March 2008, 17:44

Quote:

Originally Posted by roman76r

dirkr

Yes. tsMuxeR remove pulldown marks only, It does not try to convert interlaced video to progresive. why converting to progressive mode is necessary? It does not improve visual quality.

Well, the reason for that is simple.....My Popcornhour box stutters If I want to play the movie in 24p as long as it is interleaced.

By using vc1conv I can play every HD-DVD smooth in 24p! That is the reason and I thought your removing pulldown button does the same as vc1conv.

As far as I know VC1conv doesn't convert anything it changes the header....

DoomBot · 30th March 2008, 17:55

Quote:

Originally Posted by dirkr

Well, the reason for that is simple.....My Popcornhour box stutters If I want to play the movie in 24p as long as it is interleaced.

By using vc1conv I can play every HD-DVD smooth in 24p! That is the reason and I thought your removing pulldown button does the same as vc1conv.

As far as I know VC1conv doesn't convert anything it changes the header....

Thats correct, VC1conv only changes the header.

roman76r · 30th March 2008, 18:01

VC1conv does 2 actions:
-Removal pulldown marks.
-сhange frames header type from interlaced to progressive.

OK. I'll add second action in the future version.

TEB · 30th March 2008, 18:24

Quote:

Originally Posted by roman76r

chamb_link

Yes. I have started to improve subtitles support in tsMuxR.
I plan the following:
1. Add .srt subtitles support and ability to convert srt to PGS
2. Add dvd subtitles support and ability to convert srt to SUB.
3. Ability to convert SUB to PGS
4. Add HD-DVD subtitles, ability to convert HD-DVD subtitles to DVD SUB or PGS.
5. Add other txt based subtitles

Awesome.. Will u support DVD subs --> DVB subs ? with the ability to remove source subs ? (strip away unnecessary garbage!)
Keep up the good work!

TE

kurt · 30th March 2008, 19:17

Quote:

Originally Posted by roman76r

VC1conv does 2 actions:
-Removal pulldown marks.
-сhange frames header type from interlaced to progressive.

OK. I'll add second action in the future version.

much appreciated for us Popcorn users

dirkr · 30th March 2008, 19:25

Quote:

Originally Posted by roman76r

VC1conv does 2 actions:
-Removal pulldown marks.
-сhange frames header type from interlaced to progressive.

OK. I'll add second action in the future version.

A HUGE Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!

guru1968 · 30th March 2008, 19:25

Quote:

Originally Posted by roman76r

* Version 1.7.2(b)
- Issue with demuxing PGS to SUP format fixed.

Confirmed!
- at least the issues I ran into are history with version 1.7.2(b)

Thanx
guru

nekrosoft13 · 30th March 2008, 23:45

would it be possible to add an option to merge files?

roman76r · 31st March 2008, 00:23

dirkr
kurt
In any case, please try new version on popkorn. May be reason of stutters in pulldown marks only.

survivant001 · 31st March 2008, 00:49

Quote:

Originally Posted by roman76r

dirkr
kurt
In any case, please try new version on popkorn. May be reason of stutters in pulldown marks only.

what is popkorn ?

DoomBot · 31st March 2008, 01:36

Popcorn hour is a media player

73ChargerFan · 31st March 2008, 02:20

First, I demuxed a TS file into the H264 & LPCM streams.

The LPCM track was exported as two 6-channel wav files, due to the size limit of the wav format. SurCode DTS needs 6 separate mono wav files, one for each channel. I wasted all day trying to create these, and most of the tools aren't up to it.

Finally I used Audacity 1.3.4-beta to merge the parts, rename the streams (it named them 1, 2, ..., 6), then exported the separated streams. DIFFICULT.

Encoded LPCM track to DTS 1.536 mb/s using SurCode DVD DTS version 1.0.23.

The .dts file gave error "can't detect stream type" (latest mpc can play it, but for some reason the length was expanded from 131 minutes to 133 minutes.)

A 6 channel DTS .wav file was recognized as 2 channel (so does mpc.)

tsMuxeR v1.7.2 correctly recognized the DTS Compact file .cpt.

Now I'm trying to remux the results.

Q1: Should I enable or disable "Add picture timing info" and "Continually insert SPS/PPS" options for the H264 stream? What are these options?

Q2: Can the options be explained in the first post?

Q3: Can the readme.txt file be translated from russian to english?

Q4. Can an option be added to export LPCM tracks to separate channels, as mono WAV files with the names "FL, FR, CENTER, LFE, SL, SR"?

Thanks for all the hard work.

73ChargerFan · 31st March 2008, 02:29

I cleared the two options, "timing info" & "SPS/PPS" and muxed a few minutes work, and the results look and sound good.

When I mux, I get the following messages in the output:

Decoding H264 stream (track 1): Profile: High@4.1 Resolution: 1920:1080p Frame rate: 23.976
H.264 muxing fps not set. Get fps from stream.

Why the error message about the fps not set?

Ryu77 · 31st March 2008, 03:33

Quote:

Originally Posted by 73ChargerFan

I cleared the two options, "timing info" & "SPS/PPS" and muxed a few minutes work, and the results look and sound good.

When I mux, I get the following messages in the output:

Decoding H264 stream (track 1): Profile: High@4.1 Resolution: 1920:1080p Frame rate: 23.976
H.264 muxing fps not set. Get fps from stream.

Why the error message about the fps not set?

The message is simply letting you know that you didn't set the fps manually and it will get the information from the stream.

In regards to your "Add picture timing info" and "Continually insert SPS/PPS" question... I would also like to know detailed information about what these options actually do.

kurt · 31st March 2008, 07:12

Quote:

Originally Posted by roman76r

dirkr
kurt
In any case, please try new version on popkorn. May be reason of stutters in pulldown marks only.

sorry, unfortunately I'm not at home for the next 14 days and cannot test.
dirkr?

but if I remember correctly the early vc1conv version (which only removed pulldown) did actually work without stuttering on Pocorn Hour ...

n0mag!c · 31st March 2008, 07:53

Quote:

Originally Posted by roman76r

* Version 1.6.3(b)[/URL]
-Bug fixed: PTS/DTS timing for MPEG2 streams without GOP headers filled wrong

720x576@25 - now plays fine on PS3
1920x1080@24 - now plays fine on PS3
1920x1080@30 (with 3:2 pulldown) - still can't plays fine on PC & PS3

Quote:

Originally Posted by roman76r

* Version 1.7.2(b)
- Bug fixed: Now pulldown info correctly processed.
- Ability to remove pulldown info from stream added. All video codecs are supported: H.264, VC-1, MPEG2.

I will test again with new version this week.

dirkr · 31st March 2008, 09:11

Quote:

Originally Posted by roman76r

dirkr
kurt
In any case, please try new version on popkorn. May be reason of stutters in pulldown marks only.

tested with 1.7.1b => not working.

will try 1.7.2b in 2 hours

fbd · 31st March 2008, 10:33

Quote:

Originally Posted by dirkr

tested with 1.7.1b => not working.

will try 1.7.2b in 2 hours

@ roman76r and all
vc1conv V0.3 modify these settings :

http://forum.doom9.org/showpost.php?...6&postcount=54

See Ron writing:

Resetting the interlaced flag to 0 (yes)
Resetting the pulldown flag to 0 (no)
Resetting the frame rate to 24000/1001 (yes)
Removing the FCM (yes)
Removing TFF/RFF (aka RPTFRM) (no)
Removing UVSAMP (yes)
Removing that last byte if it is 0x00. (no)

I don't clear the pulldown flag. I just set RPTFRM to 0 in each frame. This seems to be the common practice on Blu-ray streams.

Regards,
Franck

mmace · 31st March 2008, 10:46

I tried this software yesterday on 2 films, both are 1920x1080 mpeg2 23.976fps m2v files, I also had .dts 6 channel 1500kps for each of them.
I tried muxing to m2ts as well as Blu-ray structure, both films ended up with no audio (I tried playing the .dts and it's fine on its own)

what am I doing wrong?

31st March 2008, 00:23	#850 \| Link
roman76r Registered User Join Date: Jan 2008 Posts: 140	dirkr kurt In any case, please try new version on popkorn. May be reason of stutters in pulldown marks only. Last edited by roman76r; 31st March 2008 at 00:27.

31st March 2008, 02:20	#853 \| Link
73ChargerFan Registered User Join Date: Dec 2006 Posts: 523	Please Explain Command Line Options First, I demuxed a TS file into the H264 & LPCM streams. The LPCM track was exported as two 6-channel wav files, due to the size limit of the wav format. SurCode DTS needs 6 separate mono wav files, one for each channel. I wasted all day trying to create these, and most of the tools aren't up to it. Finally I used Audacity 1.3.4-beta to merge the parts, rename the streams (it named them 1, 2, ..., 6), then exported the separated streams. DIFFICULT. Encoded LPCM track to DTS 1.536 mb/s using SurCode DVD DTS version 1.0.23. The .dts file gave error "can't detect stream type" (latest mpc can play it, but for some reason the length was expanded from 131 minutes to 133 minutes.) A 6 channel DTS .wav file was recognized as 2 channel (so does mpc.) tsMuxeR v1.7.2 correctly recognized the DTS Compact file .cpt. Now I'm trying to remux the results. Q1: Should I enable or disable "Add picture timing info" and "Continually insert SPS/PPS" options for the H264 stream? What are these options? Q2: Can the options be explained in the first post? Q3: Can the readme.txt file be translated from russian to english? Q4. Can an option be added to export LPCM tracks to separate channels, as mono WAV files with the names "FL, FR, CENTER, LFE, SL, SR"? Thanks for all the hard work.

31st March 2008, 02:29	#854 \| Link
73ChargerFan Registered User Join Date: Dec 2006 Posts: 523	I cleared the two options, "timing info" & "SPS/PPS" and muxed a few minutes work, and the results look and sound good. When I mux, I get the following messages in the output: Decoding H264 stream (track 1): Profile: High@4.1 Resolution: 1920:1080p Frame rate: 23.976 H.264 muxing fps not set. Get fps from stream. Why the error message about the fps not set?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30th March 2008, 18:01	#844 \| Link
roman76r Registered User Join Date: Jan 2008 Posts: 140	VC1conv does 2 actions: -Removal pulldown marks. -сhange frames header type from interlaced to progressive. OK. I'll add second action in the future version.

30th March 2008, 23:45	#849 \| Link
nekrosoft13 Registered User Join Date: Jun 2003 Location: Chicagoland or Poland Posts: 193	would it be possible to add an option to merge files?

31st March 2008, 01:36	#852 \| Link
DoomBot Registered User Join Date: Jan 2008 Posts: 98	Popcorn hour is a media player

31st March 2008, 10:46	#860 \| Link
mmace Registered User Join Date: Mar 2007 Posts: 123	I tried this software yesterday on 2 films, both are 1920x1080 mpeg2 23.976fps m2v files, I also had .dts 6 channel 1500kps for each of them. I tried muxing to m2ts as well as Blu-ray structure, both films ended up with no audio (I tried playing the .dts and it's fine on its own) what am I doing wrong?