Can't get DeDynamic to save output as WMA2

JimmyBarnes · 9th January 2002, 06:00

I'm using DeDynamic v1.1b

I ran

dedynamic -a 6 ph.wav ph_6.wav

and selected Windows Media Audio v2 format, 64 kb/s 44 KHz DivX audio

The program scanned for peaks, but produced only a token ph_6.wav
(probably just the header). Didn't give any error messages.

Any idea what's wrong?

The following is the screen output from an actual run:

I:\temp>dedynamic -a 10 ph.wav PHx4(WMA2).wav
DeDynamic Version 1.1b
(c) 2000 by Matthias Lenk (matthias.lenk@gmx.de)

Amplifying 10.0 dB

1.Find Peaks ....... maximum sample value 32768
2.Process Audio .... done

Source Length: 9959.967 s
Destination Length: 0.000 s
Not Processed (end): 0.000 s
Compression: 22.0 x
Compressed rate: 8010.352 bytes/s

9th January 2002, 13:31

??? Jimmy, what the heck are you trying to do here ?
DeDynamic is a WAV processor, the output should always be WAV again AFAIK ... can you select PCM output somewhere ?

prot0vision · 9th January 2002, 18:05

Hi There,

I think that WMA2 only accepts 44.1 khz streams.

When I use dedynamic I always use the '-rate 44100' option to convert down to 44.1

prot0vision

9th January 2002, 06:00	#1 \| Link
JimmyBarnes the Interrogator Join Date: Oct 2001 Location: DownUnder Posts: 664	Can't get DeDynamic to save output as WMA2 I'm using DeDynamic v1.1b I ran dedynamic -a 6 ph.wav ph_6.wav and selected Windows Media Audio v2 format, 64 kb/s 44 KHz DivX audio The program scanned for peaks, but produced only a token ph_6.wav (probably just the header). Didn't give any error messages. Any idea what's wrong? The following is the screen output from an actual run: I:\temp>dedynamic -a 10 ph.wav PHx4(WMA2).wav DeDynamic Version 1.1b (c) 2000 by Matthias Lenk (matthias.lenk@gmx.de) Amplifying 10.0 dB 1.Find Peaks ....... maximum sample value 32768 2.Process Audio .... done Source Length: 9959.967 s Destination Length: 0.000 s Not Processed (end): 0.000 s Compression: 22.0 x Compressed rate: 8010.352 bytes/s

9th January 2002, 18:05	#3 \| Link
prot0vision Registered User Join Date: Oct 2001 Posts: 31	convert to 44.1 khz Hi There, I think that WMA2 only accepts 44.1 khz streams. When I use dedynamic I always use the '-rate 44100' option to convert down to 44.1 prot0vision

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

9th January 2002, 13:31	#2 \| Link
ChristianHJW Guest Posts: n/a	??? Jimmy, what the heck are you trying to do here ? DeDynamic is a WAV processor, the output should always be WAV again AFAIK ... can you select PCM output somewhere ?