eac3to - audio conversion tool - Page 440

xkodi · 23rd April 2009, 11:27

Quote:

Originally Posted by sidekick2

Or, has anyone tried upgrading arcsoft to version 3 and had eac3to still work?

I really don't want to lose my eac3to tools!

Thanks!

i haven't tried, but DTS-HD decoded DLL in version 3 is exactly the same version as in version 2, so i guess eac3to will work .

ACrowley · 23rd April 2009, 12:03

Quote:

Originally Posted by xkodi

i haven't tried, but DTS-HD decoded DLL in version 3 is exactly the same version as in version 2, so i guess eac3to will work .

eac3to( or Dshow Apps/Players) wont work with TMT v3

1. Arcsoft TMT 3 doesnt install Filters/Decoders in C:\Programme(x86)\CommonFiles and theyre not registered from installer in Dshow.
2. Its not possible to reg them manually .You get a Error Message from reg32. It looks like that we cant use the Filters from TMT v3 outside TMT.
However, the Decoder Versions are not updated so i dont care

Workaround :
-Install Arcsoft TMT 3 as usual and use it.
-Install Arsoft TMT 2.25 Standalone Decoder Package to use the Decoders in eac3to and other Apps.
It works in eac3to and TMT 3 use its on Filters from installation Folder

@umaximus
I cannot reproduce your Problem. All Files are working fine on my NMT A110.
Remuxed with eac3to and/or MKVmerge with all types of Audio (including DTSHD,TrueHD etc)

sidekick2 · 24th April 2009, 07:37

ACrowley,

I'm not quite understanding that 2nd part... Are you saying to install the old version of Arcsoft TMT 2.25 after installing 3.0? Or are you saying to download a specific decoder package from somewhere? If so, where? I've looked on Arcsoft's site, and googled, and I'm not finding a decoder only package?!?

Hmm.. looking in my C:\Program Files\ArcSoft\TotalMedia Extreme\Digital Theatre\Codec I see the files in there. Should I just save a copy of that folder somewhere, or what?

Thanks!

Quote:

Originally Posted by ACrowley

eac3to( or Dshow Apps/Players) wont work with TMT v3

Workaround :
-Install Arcsoft TMT 3 as usual and use it.
-Install Arsoft TMT 2.25 Standalone Decoder Package to use the Decoders in eac3to and other Apps.
It works in eac3to and TMT 3 use its on Filters from installation Folder

rica · 26th April 2009, 17:00

Hi guys,

What program do you suggest me to clean the audio files ?

Thunderbolt8 · 26th April 2009, 22:38

for ac3 files? delaycut 1.3

jj666 · 27th April 2009, 06:17

Hi Madshi,

I'm remuxing the main movie from Blu-ray disks and keeping all DTS-HD audio files intact. Would there be any way you would consider to make a note of the audio bitrate when demuxing as there is no easy way to ascertain the bitrate on VBR DTS-HD files (which 99% seem to be) as Mediainfo is not geared up to handle that type of file. I did already ask Zenitram about adding, I think on his list of "to-do's" for the far future as it would mean Mediainfo needs to scan the entire file which is not possible at the moment. I'm forced to use BDInfo at the moment to scan the entire disk, which can be time consuming.

Cheers,

-jj-

tebasuna51 · 27th April 2009, 11:39

Quote:

Originally Posted by jj666

...Would there be any way you would consider to make a note of the audio bitrate when demuxing as there is no easy way to ascertain the bitrate on VBR DTS-HD files ...

Is easy to know the average bitrate if you have the DTS-HD demuxed:

bitrate = filesize_in_bits / duration_in_seconds

jj666 · 28th April 2009, 01:17

Thank you for your insight tebasuna51.

I'm just testing a file I have with the following information:

DTS-HD MA:
1.36 gigabytes = (11408506.88 kilobits) calculator
1 hour 37 minutes 26 seconds (5846 seconds)
= bitrate 1951.50 kbps

compares adequately to the mentioned av. bitrate of 1991 kbps in BDINFO after full scan :-).

Thanks again, this saves me a lot of time!

Cheers,

-jj-

stinman · 28th April 2009, 01:50

Malwarebytes' Anti-Malware 1.36
Database version: 2051
Windows 6.0.6001 Service Pack 1

4/27/2009 8:28:17 PM
mbam-log-2009-04-27 (20-28-13).txt

Scan type: Quick Scan
Objects scanned: 69890
Time elapsed: 2 minute(s), 19 second(s)

Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 4

Memory Processes Infected:
(No malicious items detected)

Memory Modules Infected:
(No malicious items detected)

Registry Keys Infected:
(No malicious items detected)

Registry Values Infected:
(No malicious items detected)

Registry Data Items Infected:
(No malicious items detected)

Folders Infected:
(No malicious items detected)

Files Infected:
C:\Program Files\avcodec.dll (Spyware.OnlineGames) -> No action taken.
C:\Program Files\avutil-49.dll (Spyware.OnlineGames) -> No action taken.
C:\Program Files\libaften.dll (Spyware.OnlineGames) -> No action taken.
C:\Program Files\libFLAC.dll (Spyware.OnlineGames) -> No action taken.

This is the log file,should I send it to malwarebytes or could it of got contaminated.I sure do not believe these filters are viruses.I do not how how they got spyware online gaming.I think it is from eac3to or megui.

Mark

rack04 · 28th April 2009, 15:47

Can anyone tell me if the following extensions are correct for extracting audio from Blu-ray/HD DVD?

Code:

if "%INPUT_AUDIO_TYPE%" EQU "ac3" goto ac3
if "%INPUT_AUDIO_TYPE%" EQU "eac3" goto eac3
if "%INPUT_AUDIO_TYPE%" EQU "thd" goto thd
if "%INPUT_AUDIO_TYPE%" EQU "dts" goto dts
if "%INPUT_AUDIO_TYPE%" EQU "dtshd" goto dtshd
if "%INPUT_AUDIO_TYPE%" EQU "pcm" goto pcm

:ac3
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.ac3"
@Echo off
goto subtitle

:eac3
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.eac3"
@Echo off
goto subtitle

:thd
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.thd+ac3"
@Echo off
goto subtitle

:dts
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.dts"
@Echo off
goto subtitle

:dtshd
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.dtshd"
@Echo off
goto subtitle

:pcm
Echo.
Echo.
Echo.
@Echo on
"%eac3to_PATH%" "%INPUT_DIRECTORY%" "%MAIN_MOVIE%") %AUDIO_TRACK%: "%WORKING_DIRECTORY%\%OUTPUT_FILENAME%.w64"
@Echo off
goto subtitle

mrr19121970 · 28th April 2009, 19:18

Code:

AC3
E-AC3
DTS
DTS Master Audio
DTS Hi-Res
DTS-HD (no core)
DTS Express
FLAC
RAW/PCM
MLP
TrueHD
TrueHD/AC3
WAV
W64RF64
DTSWAV
AC3WAV
AAC
MP1
MP2
MP3
Unknown audio track

these are all the possible ones.

rfic · 28th April 2009, 20:03

i use eac3to to convert dts fps from 25 to 23.976

i have SurCode DVD DTS 1.0.21; but eac3to reports SurCode can't read .wave file whatever, then exit; the worst thing is it delete all generated .wave files and i can't even bebug what's wrong there

can i somehow at least keep those .wave files and use Surcode directly?

thanks

and here's log file

===================

eac3to v3.15
command line: eac3to.exe JACKY.track_4132.dts Jacky.23.976.dts -25.000 -changeTo23.976 -resampleTo48000
------------------------------------------------------------------------------
DTS Master Audio, 5.1 channels, 24 bits, 96khz
(core: DTS-96/24, 5.1 channels, 24 bits, 1509kbps, 96khz)
Decoding with ArcSoft DTS Decoder...
Changing FPS from 25.000 to 23.976...
Resampling to 48khz...
Reducing depth from 64 to 32 bits...
Writing WAVs...
Creating file "Jacky.23.976.SL.wav"...
Creating file "Jacky.23.976.LFE.wav"...
Creating file "Jacky.23.976.SR.wav"...
Creating file "Jacky.23.976.R.wav"...
Creating file "Jacky.23.976.C.wav"...
Creating file "Jacky.23.976.L.wav"...
Clipping detected, a 2nd pass will be necessary. <WARNING>
The original audio track has a constant bit depth of 24 bits.
The processed audio track has a constant bit depth of 32 bits.
Caution: The WAV file is bigger than 2GB. <WARNING>
Some WAV readers might not be able to handle this file correctly. <WARNING>
Starting 2nd pass...
Decoding with ArcSoft DTS Decoder...
Changing FPS from 25.000 to 23.976...
Resampling to 48khz...
Reducing depth from 64 to 32 bits...
Writing WAVs...
Creating file "Jacky.23.976.L.wav"...
Creating file "Jacky.23.976.R.wav"...
Creating file "Jacky.23.976.C.wav"...
Creating file "Jacky.23.976.SR.wav"...
Creating file "Jacky.23.976.LFE.wav"...
Creating file "Jacky.23.976.SL.wav"...
The processed audio track has a constant bit depth of 32 bits.
Caution: The WAV file is bigger than 2GB. <WARNING>
Some WAV readers might not be able to handle this file correctly. <WARNING>
Encoding DTS <1536kbps> with Surcode...
Found Surcode DTS Encoder version 1.0.21.0.
Surcode says/asks: "At least one valid source file must be specified to encode.".
Pressing the Surcode "Encode" button didn't seem to work...
Closing Surcode...

hubblec4 · 28th April 2009, 21:47

hello

you can try this one:
command line: eac3to.exe JACKY.track_4132.dts Jacky.23.976.wavs -25.000 -changeTo23.976 -resampleTo48000

and then start SurCode load the files manually and convert them.

hubble

Joniii · 29th April 2009, 13:29

I'm demuxing E-AC3 track from HD DVD, eac3to says remapping channels. Is there something wrong, I thought E-AC3 tracks from HD DVD shouldn't be remapped?

rfic · 29th April 2009, 21:17

Quote:

Originally Posted by hubblec4

hello

you can try this one:
command line: eac3to.exe JACKY.track_4132.dts Jacky.23.976.wavs -25.000 -changeTo23.976 -resampleTo48000

and then start SurCode load the files manually and convert them.

hubble

thanks, hubble

it works -- i can get all 6 channel of .wav

and after i use Surcode to synth 6 channel of .wav to .dts, it finish successfully; but somehow, when i try to add this .dts to Tsmuxer, it doesn't recognize

anything i need to do?

thanks

hoju3508 · 30th April 2009, 17:01

I have the same issue with Tsmuxer and Ripbot264 not recognizing my .dts file. I just saw this in another post:

http://forum.doom9.org/showthread.ph...82#post1271882

He ran the .dts file through eac3to again and it's working for him. I'm going to try this myself.

Quote:

Originally Posted by rfic

thanks, hubble

it works -- i can get all 6 channel of .wav

and after i use Surcode to synth 6 channel of .wav to .dts, it finish successfully; but somehow, when i try to add this .dts to Tsmuxer, it doesn't recognize

anything i need to do?

thanks

ggking7 · 30th April 2009, 20:50

The latest eac3to breaks Linux support via wine for me. I now get:

$ wine ~/eac3to/eac3to video "1)" 2: video.vc1 3: audio.ac3
Error reading file "video\BDMV\STREAM\00004.m2ts".

This same command worked perfectly on a previous version of eac3to (can't remember which one). I think it's because eac3to uses \ instead of / characters for the path. Does anyone know how to work around this?

tebasuna51 · 1st May 2009, 01:13

Quote:

Originally Posted by rfic

and after i use Surcode to synth 6 channel of .wav to .dts, it finish successfully; but somehow, when i try to add this .dts to Tsmuxer, it doesn't recognize

When you encode with Surcode use the .cpt (compact) format instead the .dts (padded) format. After rename to dts.

hoju3508 · 1st May 2009, 05:25

I see what you mean. I ran it through eac3to again and it removed the padding. Now it works with TsMuxer.

Thanks,

-Hoju

Quote:

eac3to v3.15
command line: ..\..\eac3to\eac3to.exe wdky.dts wdky_new.dts
------------------------------------------------------------------------------
DTS (zero padded), 5.1 channels, 1:40:04, 24 bits, 1510kbps, 48khz
Removing DTS zero padding...
Creating file "wdky_new.dts"...
eac3to processing took 2 minutes, 8 seconds.
Done.

Quote:

Originally Posted by tebasuna51

When you encode with Surcode use the .cpt (compact) format instead the .dts (padded) format. After rename to dts.

Someone_123 · 1st May 2009, 20:37

I have a problem. I load the track in eac3to and select to decode it, but nothing happens... and I wait, and wait. I tried everyting: changed the version of the program with newer, reinstalled the codecs, but the problem still is the same. Usually when i load the track in the program and select to decode it, it opens CMD for a second or two and makes an analyse, then i can do my job.
What's the problem? And how can I fix it?

28th April 2009, 01:50	#8789 \| Link
stinman Registered User Join Date: Jul 2007 Posts: 54	malwarebytes tells me that these tool in eac3to are virus,please look Malwarebytes' Anti-Malware 1.36 Database version: 2051 Windows 6.0.6001 Service Pack 1 4/27/2009 8:28:17 PM mbam-log-2009-04-27 (20-28-13).txt Scan type: Quick Scan Objects scanned: 69890 Time elapsed: 2 minute(s), 19 second(s) Memory Processes Infected: 0 Memory Modules Infected: 0 Registry Keys Infected: 0 Registry Values Infected: 0 Registry Data Items Infected: 0 Folders Infected: 0 Files Infected: 4 Memory Processes Infected: (No malicious items detected) Memory Modules Infected: (No malicious items detected) Registry Keys Infected: (No malicious items detected) Registry Values Infected: (No malicious items detected) Registry Data Items Infected: (No malicious items detected) Folders Infected: (No malicious items detected) Files Infected: C:\Program Files\avcodec.dll (Spyware.OnlineGames) -> No action taken. C:\Program Files\avutil-49.dll (Spyware.OnlineGames) -> No action taken. C:\Program Files\libaften.dll (Spyware.OnlineGames) -> No action taken. C:\Program Files\libFLAC.dll (Spyware.OnlineGames) -> No action taken. This is the log file,should I send it to malwarebytes or could it of got contaminated.I sure do not believe these filters are viruses.I do not how how they got spyware online gaming.I think it is from eac3to or megui. Mark

28th April 2009, 19:18	#8791 \| Link
mrr19121970 Registered User Join Date: Mar 2008 Posts: 305	Code: AC3 E-AC3 DTS DTS Master Audio DTS Hi-Res DTS-HD (no core) DTS Express FLAC RAW/PCM MLP TrueHD TrueHD/AC3 WAV W64RF64 DTSWAV AC3WAV AAC MP1 MP2 MP3 Unknown audio track these are all the possible ones. __________________ Blu-Ray Movie Only Copies : Clown_BD Blu-Ray Movie Only DVD Conversion : Clown_BD Blu-Ray Copies With Menus : Clown_BD BD Copier

28th April 2009, 20:03	#8792 \| Link
rfic Registered User Join Date: Mar 2009 Posts: 9	can i save decoded files if encoding fails? i use eac3to to convert dts fps from 25 to 23.976 i have SurCode DVD DTS 1.0.21; but eac3to reports SurCode can't read .wave file whatever, then exit; the worst thing is it delete all generated .wave files and i can't even bebug what's wrong there can i somehow at least keep those .wave files and use Surcode directly? thanks and here's log file =================== eac3to v3.15 command line: eac3to.exe JACKY.track_4132.dts Jacky.23.976.dts -25.000 -changeTo23.976 -resampleTo48000 ------------------------------------------------------------------------------ DTS Master Audio, 5.1 channels, 24 bits, 96khz (core: DTS-96/24, 5.1 channels, 24 bits, 1509kbps, 96khz) Decoding with ArcSoft DTS Decoder... Changing FPS from 25.000 to 23.976... Resampling to 48khz... Reducing depth from 64 to 32 bits... Writing WAVs... Creating file "Jacky.23.976.SL.wav"... Creating file "Jacky.23.976.LFE.wav"... Creating file "Jacky.23.976.SR.wav"... Creating file "Jacky.23.976.R.wav"... Creating file "Jacky.23.976.C.wav"... Creating file "Jacky.23.976.L.wav"... Clipping detected, a 2nd pass will be necessary. <WARNING> The original audio track has a constant bit depth of 24 bits. The processed audio track has a constant bit depth of 32 bits. Caution: The WAV file is bigger than 2GB. <WARNING> Some WAV readers might not be able to handle this file correctly. <WARNING> Starting 2nd pass... Decoding with ArcSoft DTS Decoder... Changing FPS from 25.000 to 23.976... Resampling to 48khz... Reducing depth from 64 to 32 bits... Writing WAVs... Creating file "Jacky.23.976.L.wav"... Creating file "Jacky.23.976.R.wav"... Creating file "Jacky.23.976.C.wav"... Creating file "Jacky.23.976.SR.wav"... Creating file "Jacky.23.976.LFE.wav"... Creating file "Jacky.23.976.SL.wav"... The processed audio track has a constant bit depth of 32 bits. Caution: The WAV file is bigger than 2GB. <WARNING> Some WAV readers might not be able to handle this file correctly. <WARNING> Encoding DTS <1536kbps> with Surcode... Found Surcode DTS Encoder version 1.0.21.0. Surcode says/asks: "At least one valid source file must be specified to encode.". Pressing the Surcode "Encode" button didn't seem to work... Closing Surcode...

26th April 2009, 17:00	#8784 \| Link
rica Registered User Join Date: Mar 2008 Posts: 2,021	Hi guys, What program do you suggest me to clean the audio files ?

26th April 2009, 22:38	#8785 \| Link
Thunderbolt8 Registered User Join Date: Sep 2006 Posts: 2,197	for ac3 files? delaycut 1.3

27th April 2009, 06:17	#8786 \| Link
jj666 Registered User Join Date: May 2003 Posts: 153	Hi Madshi, I'm remuxing the main movie from Blu-ray disks and keeping all DTS-HD audio files intact. Would there be any way you would consider to make a note of the audio bitrate when demuxing as there is no easy way to ascertain the bitrate on VBR DTS-HD files (which 99% seem to be) as Mediainfo is not geared up to handle that type of file. I did already ask Zenitram about adding, I think on his list of "to-do's" for the far future as it would mean Mediainfo needs to scan the entire file which is not possible at the moment. I'm forced to use BDInfo at the moment to scan the entire disk, which can be time consuming. Cheers, -jj-

28th April 2009, 01:17	#8788 \| Link
jj666 Registered User Join Date: May 2003 Posts: 153	Thank you for your insight tebasuna51. I'm just testing a file I have with the following information: DTS-HD MA: 1.36 gigabytes = (11408506.88 kilobits) calculator 1 hour 37 minutes 26 seconds (5846 seconds) = bitrate 1951.50 kbps compares adequately to the mentioned av. bitrate of 1991 kbps in BDINFO after full scan :-). Thanks again, this saves me a lot of time! Cheers, -jj-

28th April 2009, 21:47	#8793 \| Link
hubblec4 Matroska find' ich toll Join Date: Apr 2008 Posts: 1,380	hello you can try this one: command line: eac3to.exe JACKY.track_4132.dts Jacky.23.976.wavs -25.000 -changeTo23.976 -resampleTo48000 and then start SurCode load the files manually and convert them. hubble

29th April 2009, 13:29	#8794 \| Link
Joniii Registered User Join Date: Aug 2007 Posts: 301	I'm demuxing E-AC3 track from HD DVD, eac3to says remapping channels. Is there something wrong, I thought E-AC3 tracks from HD DVD shouldn't be remapped?

30th April 2009, 20:50	#8797 \| Link
ggking7 Registered User Join Date: Sep 2006 Posts: 249	The latest eac3to breaks Linux support via wine for me. I now get: $ wine ~/eac3to/eac3to video "1)" 2: video.vc1 3: audio.ac3 Error reading file "video\BDMV\STREAM\00004.m2ts". This same command worked perfectly on a previous version of eac3to (can't remember which one). I think it's because eac3to uses \ instead of / characters for the path. Does anyone know how to work around this?

1st May 2009, 20:37	#8800 \| Link
Someone_123 Registered User Join Date: Apr 2009 Posts: 4	I have a problem. I load the track in eac3to and select to decode it, but nothing happens... and I wait, and wait. I tried everyting: changed the version of the program with newer, reinstalled the codecs, but the problem still is the same. Usually when i load the track in the program and select to decode it, it opens CMD for a second or two and makes an analyse, then i can do my job. What's the problem? And how can I fix it?