MadVR in use with LG OLED Thread - Page 32

Magik Mark · 29th January 2020, 13:34

I'm experimenting with madvr beta 113. Is there a procedure in installing it? I just copied it in my madvr folder. I was able to run the configuration but when I play a movie it hangs and asking me to quit or continue.

Continuing freezes the player. Do I need to reset it then redo the configuration?

quietvoid · 29th January 2020, 19:16

You need to disable smooth motion with beta 113, there is a bug that crashes the renderer.

Magik Mark · 29th January 2020, 21:10

Oh. Thanks for letting me know

Sent from my iPhone using Tapatalk

senzaparole · 4th February 2020, 15:42

Hello guys.

I own an LG B9 TV and a pc with the RX 5700 XT video card.

Do you recommend in the madVR settings to select "tone map HDR using shaders" without selecting "video output in HDR format"?

I would do an HDR> SDR conversion on the LG B9 TV using madVR tone mapping.

In this way I also solve the problem of the washed out colors caused by the Rx 5700 XT when the TV switches to HDR mode.
It's a good idea or is it better to enable video output in HDr format??

Asmodian · 4th February 2020, 16:19

I think it is a good idea, at least until AMD's drivers get fixed.

senzaparole · 10th February 2020, 13:05

I abbandoned the conversion from HDR to SDR on the LG OLED B9 because the videos have a low brightness.

So to solve the problem of the drivers of the RX 5700 XT I thought to enable the Windows HDR:

It all seems ok but I'm not an expert. What are you saying? Can I improve something?
In chroma upscaling and image upscaling I have selected NGU sharp for 4K videos only.

Magik Mark · 20th February 2020, 00:55

When using MadVR Tone mapping, Shall I:

1. Passthrough Meta data to the display?
2. Turn off dynamic tone mapping of the display?

Any other prerequisites?

SamuriHL · 20th February 2020, 01:21

I use HDR output enabled, real display nits set to 700, and most definitely disable the LG DTM.

Magik Mark · 20th February 2020, 02:33

Thanks a lot. Do you mind sharing the screenshot of your MadVR tone Mapping?

QBhd · 20th February 2020, 03:57

Here is mine... But I'm always curious to see others as well

QB

Magik Mark · 20th February 2020, 04:06

Thanks QBhd

This is b113 right?

How about your 60FPS hdr?

QBhd · 20th February 2020, 07:18

I just passthrough 60fps... slide show with tone mapping so I needed a profile for the One and Only 60 fps movie out there (at least new movies)… I really don't expect it will be used again

QB

Magik Mark · 20th February 2020, 09:40

Thanks again QBhd!

SamuriHL · 20th February 2020, 12:58

Those are almost identical to my settings. The things I changed are really preference items. But I'm using the same curve and saturation settings. Sorry I didn't get to post them yesterday. Got busy watching some movies.

Sent from my SM-G975U using Tapatalk

chros · 20th February 2020, 13:12

Quote:

Originally Posted by Magik Mark

Thanks a lot. Do you mind sharing the screenshot of your MadVR tone Mapping?

Here it is.

Magik Mark · 20th February 2020, 14:04

Thanks guys!

Sent from my iPhone using Tapatalk

Magik Mark · 21st February 2020, 01:00

For those who are not using SM, can you share any tips and procedure for minimizing or completely eliminating frame drops on 2160p 23, 25 and 60 FPS? So war 24FPS in my oled C9 65" is perfect.

If you are using CRU can you share screenshots on what you have done?

Thank you so much!

Yviena · 21st February 2020, 05:24

Hmm has anyone noticed that in PC-MODE setting native bitdepth in madvr to 6bit together with Ycbcr in NVCP get's rid of the vertical stripes in the darker regions in a gradient test?

RXP · 21st February 2020, 14:20

Interesting comparison here: OLED Game Mode vs Cinema mode: https://youtu.be/ZmT8yvopMLg?t=454

No real differences but Game Mode has slightly more Chroma resolution.

huhn · 21st February 2020, 14:37

he is kinda saying the opposite of the tested results in this thread.

and someone should tell him not all LCD TV work the same in game mode what he just blindly assumes here.

29th January 2020, 13:34	#621 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	I'm experimenting with madvr beta 113. Is there a procedure in installing it? I just copied it in my madvr folder. I was able to run the configuration but when I play a movie it hangs and asking me to quit or continue. Continuing freezes the player. Do I need to reset it then redo the configuration? __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

29th January 2020, 21:10	#623 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Oh. Thanks for letting me know Sent from my iPhone using Tapatalk __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

4th February 2020, 15:42	#624 \| Link
senzaparole Registered User Join Date: Jan 2020 Location: Italia Posts: 55	Hello guys. I own an LG B9 TV and a pc with the RX 5700 XT video card. Do you recommend in the madVR settings to select "tone map HDR using shaders" without selecting "video output in HDR format"? I would do an HDR> SDR conversion on the LG B9 TV using madVR tone mapping. In this way I also solve the problem of the washed out colors caused by the Rx 5700 XT when the TV switches to HDR mode. It's a good idea or is it better to enable video output in HDr format?? __________________ TV:LG B9 65 Amplifier: Denon X4500H Front Speakers: n. 3 XTZ Cinema M6 Subwoofer: XTZ 10.17 EDGE Atmos Speakers:n. 4 XTZ S2 Surround Speakers: n. 2 XTZ Spirit 2 - HTPC: Fractal Meshify C-RX 5700 XT

4th February 2020, 16:19	#625 \| Link
Asmodian Registered User Join Date: Feb 2002 Location: San Jose, California Posts: 4,407	I think it is a good idea, at least until AMD's drivers get fixed. __________________ madVR options explained

10th February 2020, 13:05	#626 \| Link
senzaparole Registered User Join Date: Jan 2020 Location: Italia Posts: 55	I abbandoned the conversion from HDR to SDR on the LG OLED B9 because the videos have a low brightness. So to solve the problem of the drivers of the RX 5700 XT I thought to enable the Windows HDR: It all seems ok but I'm not an expert. What are you saying? Can I improve something? In chroma upscaling and image upscaling I have selected NGU sharp for 4K videos only. __________________ TV:LG B9 65 Amplifier: Denon X4500H Front Speakers: n. 3 XTZ Cinema M6 Subwoofer: XTZ 10.17 EDGE Atmos Speakers:n. 4 XTZ S2 Surround Speakers: n. 2 XTZ Spirit 2 - HTPC: Fractal Meshify C-RX 5700 XT

29th January 2020, 19:16	#622 \| Link
quietvoid Registered User Join Date: Jan 2019 Location: Canada Posts: 574	You need to disable smooth motion with beta 113, there is a bug that crashes the renderer.

20th February 2020, 00:55	#627 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	When using MadVR Tone mapping, Shall I: 1. Passthrough Meta data to the display? 2. Turn off dynamic tone mapping of the display? Any other prerequisites? __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

20th February 2020, 01:21	#628 \| Link
SamuriHL Registered User Join Date: May 2004 Posts: 5,351	I use HDR output enabled, real display nits set to 700, and most definitely disable the LG DTM. __________________ HTPC: Windows 11, AMD 5900X, RTX 3080, Pioneer Elite VSX-LX303, LG G2 77" OLED

20th February 2020, 02:33	#629 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Thanks a lot. Do you mind sharing the screenshot of your MadVR tone Mapping? __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

20th February 2020, 03:57	#630 \| Link
QBhd QB the Slayer Join Date: Feb 2011 Location: Toronto Posts: 697	Here is mine... But I'm always curious to see others as well QB __________________

20th February 2020, 04:06	#631 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Thanks QBhd This is b113 right? How about your 60FPS hdr? __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR Last edited by Magik Mark; 20th February 2020 at 06:12.

20th February 2020, 07:18	#632 \| Link
QBhd QB the Slayer Join Date: Feb 2011 Location: Toronto Posts: 697	I just passthrough 60fps... slide show with tone mapping so I needed a profile for the One and Only 60 fps movie out there (at least new movies)… I really don't expect it will be used again QB __________________

20th February 2020, 09:40	#633 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Thanks again QBhd! __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

20th February 2020, 12:58	#634 \| Link
SamuriHL Registered User Join Date: May 2004 Posts: 5,351	Those are almost identical to my settings. The things I changed are really preference items. But I'm using the same curve and saturation settings. Sorry I didn't get to post them yesterday. Got busy watching some movies. Sent from my SM-G975U using Tapatalk __________________ HTPC: Windows 11, AMD 5900X, RTX 3080, Pioneer Elite VSX-LX303, LG G2 77" OLED

20th February 2020, 14:04	#636 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Thanks guys! Sent from my iPhone using Tapatalk __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

21st February 2020, 01:00	#637 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	For those who are not using SM, can you share any tips and procedure for minimizing or completely eliminating frame drops on 2160p 23, 25 and 60 FPS? So war 24FPS in my oled C9 65" is perfect. If you are using CRU can you share screenshots on what you have done? Thank you so much! __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

21st February 2020, 05:24	#638 \| Link
Yviena Registered User Join Date: Nov 2012 Posts: 7	Hmm has anyone noticed that in PC-MODE setting native bitdepth in madvr to 6bit together with Ycbcr in NVCP get's rid of the vertical stripes in the darker regions in a gradient test?

21st February 2020, 14:20	#639 \| Link
RXP Registered User Join Date: Aug 2002 Posts: 55	Interesting comparison here: OLED Game Mode vs Cinema mode: https://youtu.be/ZmT8yvopMLg?t=454 No real differences but Game Mode has slightly more Chroma resolution.

21st February 2020, 14:37	#640 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,921	he is kinda saying the opposite of the tested results in this thread. and someone should tell him not all LCD TV work the same in game mode what he just blindly assumes here.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode