RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 554

soneca · 30th April 2012, 21:32

The same error here too, removed and loaded again from the new version, solved

mdchaser · 30th April 2012, 23:51

Atak_Snajpera, I just want to say thanks! The new version now allows me to encode across four sandybridge quad cores on a domain at unbelievable speeds. A full blu-ray in under an hour, phenomenal program!!!

rc71 · 1st May 2012, 01:31

Something strange. Just FYI.

After a couple of encodes, I notice the final files were missing. After some investigating I found that the ":" was gone from the path in the destination. I bring it up, because I DIDN'T type it. I simply chose the directory with the GUI and somewhere along the way ripbot dropped the : from the path.

Putting the default path in the ini file solved my problem, but like I said. FYI.

gr1mmj0w · 1st May 2012, 03:31

Quote:

Originally Posted by Atak_Snajpera

problem with m2ts is that it requires user's interaction. you have to select correct playlist , audio.

ahhhh ok.

that's unfortunate, well I thank you for all the hard work that goes into this. Always loved this app, even donated when I can.

slalom · 1st May 2012, 09:16

Quote:

Originally Posted by Atak_Snajpera

that job was created with older version 1.17.0?

No, same version was used

Atak_Snajpera · 1st May 2012, 12:02

rc71 and slalom
How can I reproduce that issue? Step by Step. The best would be video example from your desktop.

soneca · 1st May 2012, 15:07

Atak,

A statement that shows the percentage level as the audio has already been converted in this version does not work.

Atak_Snajpera · 1st May 2012, 19:08

this is perfect example that if ain't broken don't fix it.

i know what i did wrong.

Trayman · 1st May 2012, 19:30

Hey Atak,

Is there any particular reason that you use pgcdemux and not just do copy /b to join the vobs together ?
I tried both methods on one of my movies and then compared the resulting files using a sha1 checksum and they are exactly the same. Even checked with ppf-studio and it found zero differences.

The reason i'm wondering is that i get a dgindex error on some of my movies when there is more than one cell id in the pgc. Well actually not an dgcindex error since pgcdemux generates one file for each cell id and Ripbot264 isn't capbable to handle this so it calls dgindex with no input filename.

I tried joining one of these movies with copy /b and ran dgindex on at and it seems to have workd like it should.

I would love to try a pached version using copy /b instead of pgcdemux just to see if it goes thru like it should.
Or paus ripbot right after the combine is finished and exchange the joined vob with the copy /b one. whatever is easiest to implement for testing purposes.

//Trayman

slalom · 1st May 2012, 19:43

This is when I tried to add a new job, while encoding

This is when I tried to edit a job, while encoding

luckily, I'm still encoding

Atak_Snajpera · 1st May 2012, 20:41

trayman
tomorrow i will send you modified version.

some user said that pgcdemux helps to avoid a/v sync issues.

slalom and soneca
tomorrow i will also release fixed version.

Busero360 · 1st May 2012, 22:43

Thank you very much for this very good program, I need to spend a video of 1920x1080p to 1920x1080i without I finalize this one it is the interlaced false one, there is some way of doing this codification with this program, thank you very much for everything.

rc71 · 2nd May 2012, 03:08

Quote:

Originally Posted by Atak_Snajpera

rc71 and slalom
How can I reproduce that issue? Step by Step. The best would be video example from your desktop.

My subtitle error was solved by your update and moving the second movie in the folder to it's own folder.
For the missing COLON, ............

----DELETED by me -------------

I'm sorry I wasted your time atak. My Freaken mistake. I have two machines running ripbot and on one the .ini file had the wrong info. I PUT IT IN WRONG!!. Sorry again.

rc71 · 2nd May 2012, 03:23

If it's not a hassle. Batch encode defaults to Normalize 100%. Would it be possible to have that off by default?

Trayman · 2nd May 2012, 03:24

Quote:

Originally Posted by Atak_Snajpera

trayman
tomorrow i will send you modified version.

some user said that pgcdemux helps to avoid a/v sync issues.

Thnx man i appriciate it

//Trayman

benjyv · 2nd May 2012, 09:53

Quote:

Originally Posted by Atak_Snajpera

tomorrow i will send you modified version.

I also need too, that modified version....

Where can I find it?

soneca · 2nd May 2012, 13:14

Atak,

That problem was corrected, but with this update normalization turned on 200% by default.
And no option to turn off when x.x copy stream is selected.

Atak_Snajpera · 2nd May 2012, 16:01

RipBot264_update_2012-05-02
http://www.mediafire.com/?2w3j46at4d08dbx

soneca · 2nd May 2012, 17:40

Now everything seems to be ok.

Trayman · 2nd May 2012, 18:18

Atak I just encoded Deep Blue Sea and took a fast look through it and the audio seems to be in sync.
No problems during the encode. Will test The Exorcist next.
Will let you know how it goes.

//Trayman

1st May 2012, 12:02	#11066 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	rc71 and slalom How can I reproduce that issue? Step by Step. The best would be video example from your desktop. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

1st May 2012, 19:08	#11068 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	this is perfect example that if ain't broken don't fix it. i know what i did wrong. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

1st May 2012, 19:30	#11069 \| Link
Trayman Registered User Join Date: May 2010 Location: Sweden Posts: 63	Hey Atak, Is there any particular reason that you use pgcdemux and not just do copy /b to join the vobs together ? I tried both methods on one of my movies and then compared the resulting files using a sha1 checksum and they are exactly the same. Even checked with ppf-studio and it found zero differences. The reason i'm wondering is that i get a dgindex error on some of my movies when there is more than one cell id in the pgc. Well actually not an dgcindex error since pgcdemux generates one file for each cell id and Ripbot264 isn't capbable to handle this so it calls dgindex with no input filename. I tried joining one of these movies with copy /b and ran dgindex on at and it seems to have workd like it should. I would love to try a pached version using copy /b instead of pgcdemux just to see if it goes thru like it should. Or paus ripbot right after the combine is finished and exchange the joined vob with the copy /b one. whatever is easiest to implement for testing purposes. //Trayman Last edited by Trayman; 1st May 2012 at 19:55. Reason: Compared the files byte for byte.

1st May 2012, 20:41	#11071 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	trayman tomorrow i will send you modified version. some user said that pgcdemux helps to avoid a/v sync issues. slalom and soneca tomorrow i will also release fixed version. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

2nd May 2012, 13:14	#11077 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	Atak, That problem was corrected, but with this update normalization turned on 200% by default. And no option to turn off when x.x copy stream is selected. Last edited by soneca; 2nd May 2012 at 13:26.

30th April 2012, 21:32	#11061 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	The same error here too, removed and loaded again from the new version, solved

30th April 2012, 23:51	#11062 \| Link
mdchaser Registered User Join Date: Aug 2005 Posts: 36	Atak_Snajpera, I just want to say thanks! The new version now allows me to encode across four sandybridge quad cores on a domain at unbelievable speeds. A full blu-ray in under an hour, phenomenal program!!!

1st May 2012, 01:31	#11063 \| Link
rc71 Registered User Join Date: Aug 2011 Posts: 121	Something strange. Just FYI. After a couple of encodes, I notice the final files were missing. After some investigating I found that the ":" was gone from the path in the destination. I bring it up, because I DIDN'T type it. I simply chose the directory with the GUI and somewhere along the way ripbot dropped the : from the path. Putting the default path in the ini file solved my problem, but like I said. FYI.

1st May 2012, 15:07	#11067 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	Atak, A statement that shows the percentage level as the audio has already been converted in this version does not work.

1st May 2012, 19:43	#11070 \| Link
slalom Registered User Join Date: Jan 2010 Posts: 456	This is when I tried to add a new job, while encoding This is when I tried to edit a job, while encoding luckily, I'm still encoding

1st May 2012, 22:43	#11072 \| Link
Busero360 Registered User Join Date: Dec 2011 Posts: 2	Thank you very much for this very good program, I need to spend a video of 1920x1080p to 1920x1080i without I finalize this one it is the interlaced false one, there is some way of doing this codification with this program, thank you very much for everything.

2nd May 2012, 03:23	#11074 \| Link
rc71 Registered User Join Date: Aug 2011 Posts: 121	If it's not a hassle. Batch encode defaults to Normalize 100%. Would it be possible to have that off by default?

2nd May 2012, 16:01	#11078 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,810	RipBot264_update_2012-05-02 http://www.mediafire.com/?2w3j46at4d08dbx __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

2nd May 2012, 17:40	#11079 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	Now everything seems to be ok.

2nd May 2012, 18:18	#11080 \| Link
Trayman Registered User Join Date: May 2010 Location: Sweden Posts: 63	Atak I just encoded Deep Blue Sea and took a fast look through it and the audio seems to be in sync. No problems during the encode. Will test The Exorcist next. Will let you know how it goes. //Trayman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode