BD Rebuilder Beta - Bug Reports Only - Page 192

chudm · 10th July 2009, 03:42

yeah my bad!

at least its working good now, but transformers and batman begins worked perfect, only with this kung fu panda appeared that error

jdobbs · 10th July 2009, 04:56

I've been experimenting and I think I've come up with a much better CRF prediction algorithm for one-pass encoding. Hopefully I'll get it more accurate by this weekend. I've also finished working on the DD+ PiP audio and it now works (I tested it on "The Matrix").

chudm · 10th July 2009, 05:18

Quote:

Originally Posted by jdobbs

I've been experimenting and I think I've come up with a much better CRF prediction algorithm for one-pass encoding. Hopefully I'll get it more accurate by this weekend. I've also finished working on the DD+ PiP audio and it now works (I tested it on "The Matrix").

so, no more problems with pip? in the next release we will get pip always working?

or there are others audio for pip? (im not sure sorry

)

GaPony · 10th July 2009, 05:34

Nothing is 100% bulletproof... Nothing will "always work", especially when its still in beta.

chudm · 10th July 2009, 05:40

yeah yeah i know

but i mean... what audio does the pip uses? only dd? and thats the one that wasnt working right? so it should work now almost every pip movie with all the stuff of the bluray?

thats what i meant

chudm · 10th July 2009, 05:51

hey guys a friend have an lg bh200, does anyone knows if can read bd-r

?

GaPony · 10th July 2009, 06:06

Quote:

Originally Posted by chudm

hey guys a friend have an lg bh200, does anyone knows if can read bd-r

?

Thats a question for this thread: http://forum.doom9.org/showthread.php?t=144674

chudm · 10th July 2009, 06:10

Quote:

Originally Posted by GaPony

Thats a question for this thread: http://forum.doom9.org/showthread.php?t=144674

thx man

, but thats only for bd5/bd9 i was wondering about full backup on bd-r

chudm · 10th July 2009, 06:18

sorry for the offstopic! i found it on google, (April 08) firmware version # BH02080402F reads bd-r, but firmware from june 08 doesnt allow the player to read bd-r

saphire199 · 10th July 2009, 06:18

Tried to do death race again with new beta (25.01) Got this error on clip 59:
- Error in attempt to multiplex: MUX_00293.meta
- This is not an EBML file (id=0/440786851
[21:01:40] - Failed to build structure, aborted.

Never seen this before, so don't know what to do with it.

saphire199

chudm · 10th July 2009, 06:20

Quote:

Originally Posted by saphire199

Tried to do death race again with new beta (25.01) Got this error on clip 59:
- Error in attempt to multiplex: MUX_00293.meta
- This is not an EBML file (id=0/440786851
[21:01:40] - Failed to build structure, aborted.

Never seen this before, so don't know what to do with it.

saphire199

me neither! and i was thinking to do a backup of death race tomorrow

, im hoping mine works

GaPony · 10th July 2009, 06:27

Congratulation jdobbs!

I tried the Fast Encode option for DOGMA (42gb). The High Quality setting to BD25 took aprox 4.5 hrs and the Fast Encode setting took 2hrs 2min. The final size was 21.6gb, so the undersize wasn't very much. The quality difference between the two copies is virtually none and everything works for both copies.

I won't waste space posting the log unless you want to see it.

Thanks for an excellant addition!

Sharc · 10th July 2009, 06:34

Quote:

Originally Posted by jdobbs

Hmmm... I wonder what that could mean? The 720 resize has always worked before.

Yes, the 720 downsize worked here as well before.

Anyway, here the results of the 1-pass encode (skipping the sups):
- Target size BD-9 (DVD-9) / Full Backup / 720p resize / 2 x ac3 audio / no subs
=> Disk filled to 69% (undersize)
=> crf of main feature = 22.05. So despite the undersize the quality is still good .... very good.
=> crf estimation took 20 minutes which represents a considerable time saving compared to a say 2 hours 1st pass of a standard 2-pass encode

jdobbs · 10th July 2009, 14:08

Quote:

Originally Posted by chudm

yeah yeah i know

but i mean... what audio does the pip uses? only dd? and thats the one that wasnt working right? so it should work now almost every pip movie with all the stuff of the bluray?

thats what i meant

PiP (secondary audio) also uses a special type of DTS HD, which is not currently supported by BD-RB because TSMUXER cannot mux it.

Furiousflea · 10th July 2009, 14:19

Quote:

Originally Posted by jdobbs

PiP also uses DTS Express, which is not currently supported by BD-RB, because TSMUXER cannot mux it.

Yep, and most PiP audio tracks are DTS Express. Of my 30 or so blurays with PiP only around 5-6 are AC3+. So he might be waiting abit longer

chudm · 10th July 2009, 14:32

ohhh i see, i didnt know that guys, thx for the info

dianasta · 10th July 2009, 17:04

Hello,

I'm a new member and thanks for this great program keep the good work going

.

I did the HELLBOY2 with no errors. I use PowerDVD8 and the menu is fine. When I hit play it goes throught the fbi warning and then the PG13 screen, some other screen and then is blank nothing it just stays there.

Any ideas what this could be?

Regards.

chudm · 10th July 2009, 17:14

Quote:

Originally Posted by dianasta

Hello,

I'm a new member and thanks for this great program keep the good work going

.

I did the HELLBOY2 with no errors. I use PowerDVD8 and the menu is fine. When I hit play it goes throught the fbi warning and then the PG13 screen, some other screen and then is blank nothing it just stays there.

Any ideas what this could be?

Regards.

welcome dianasta

, what version of bd-rb did you used? was full backup to bd5? bd9? or bd25?

dianasta · 10th July 2009, 17:19

Quote:

Originally Posted by chudm

welcome dianasta

, what version of bd-rb did you used? was full backup to bd5? bd9? or bd25?

It was a full backup bd25 and the same issue was with the following bd-rb versions 2401, 2402, 2501

Thanks.

tekmobile · 10th July 2009, 17:30

Quote:

Originally Posted by dianasta

It was a full backup bd25 and the same issue was with the following bd-rb versions 2401, 2402, 2501

Thanks.

0.24.01 had a major bug that would cause something like this but it was promptly fixed in 0.24.02 onwards.

Have you tried a fresh encode with the latest version by this I mean from the start without resuming from a previous version

10th July 2009, 04:56	#3822 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 20,975	I've been experimenting and I think I've come up with a much better CRF prediction algorithm for one-pass encoding. Hopefully I'll get it more accurate by this weekend. I've also finished working on the DD+ PiP audio and it now works (I tested it on "The Matrix"). __________________ Help with development of new apps: Donations. Website: www.jdobbs.net

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10th July 2009, 03:42	#3821 \| Link
chudm Registered User Join Date: Jun 2009 Posts: 182	yeah my bad! at least its working good now, but transformers and batman begins worked perfect, only with this kung fu panda appeared that error

10th July 2009, 05:34	#3824 \| Link
GaPony Registered User Join Date: Dec 2008 Location: Georgia, USA Posts: 496	Nothing is 100% bulletproof... Nothing will "always work", especially when its still in beta.

10th July 2009, 05:40	#3825 \| Link
chudm Registered User Join Date: Jun 2009 Posts: 182	yeah yeah i know but i mean... what audio does the pip uses? only dd? and thats the one that wasnt working right? so it should work now almost every pip movie with all the stuff of the bluray? thats what i meant

10th July 2009, 05:51	#3826 \| Link
chudm Registered User Join Date: Jun 2009 Posts: 182	hey guys a friend have an lg bh200, does anyone knows if can read bd-r ?

10th July 2009, 06:18	#3829 \| Link
chudm Registered User Join Date: Jun 2009 Posts: 182	sorry for the offstopic! i found it on google, (April 08) firmware version # BH02080402F reads bd-r, but firmware from june 08 doesnt allow the player to read bd-r

10th July 2009, 06:18	#3830 \| Link
saphire199 Registered User Join Date: Feb 2009 Posts: 34	Tried to do death race again with new beta (25.01) Got this error on clip 59: - Error in attempt to multiplex: MUX_00293.meta - This is not an EBML file (id=0/440786851 [21:01:40] - Failed to build structure, aborted. Never seen this before, so don't know what to do with it. saphire199

10th July 2009, 06:27	#3832 \| Link
GaPony Registered User Join Date: Dec 2008 Location: Georgia, USA Posts: 496	Congratulation jdobbs! I tried the Fast Encode option for DOGMA (42gb). The High Quality setting to BD25 took aprox 4.5 hrs and the Fast Encode setting took 2hrs 2min. The final size was 21.6gb, so the undersize wasn't very much. The quality difference between the two copies is virtually none and everything works for both copies. I won't waste space posting the log unless you want to see it. Thanks for an excellant addition!

10th July 2009, 14:32	#3836 \| Link
chudm Registered User Join Date: Jun 2009 Posts: 182	ohhh i see, i didnt know that guys, thx for the info

10th July 2009, 17:04	#3837 \| Link
dianasta Registered User Join Date: Jul 2009 Posts: 9	Hello, I'm a new member and thanks for this great program keep the good work going . I did the HELLBOY2 with no errors. I use PowerDVD8 and the menu is fine. When I hit play it goes throught the fbi warning and then the PG13 screen, some other screen and then is blank nothing it just stays there. Any ideas what this could be? Regards.