StaxRip - Page 147

Natty · 18th June 2018, 08:56

is this official developer of staxrip now?
https://github.com/Revan654/staxrip/releases

luigizaninoni · 18th June 2018, 14:42

Quote:

Originally Posted by Revan654

Not sure if stax76 is even updating the software anymore.

I forked the project

Link: https://github.com/Revan654/staxrip/...oding/NVEnc.vb

Well done !! I thought Staxrip was dead ...

Magik Mark · 18th June 2018, 14:45

Revan654

Is it possible for you to update the x265 switches as well?

What's a good option for hdr to sdr conversation?

Sent from my iPhone using Tapatalk

Taurus · 18th June 2018, 16:48

@Revan654:
Thanks for bringing StaxRip back to life

!

Revan654 · 18th June 2018, 17:15

Quote:

Originally Posted by Natty

is this official developer of staxrip now?
https://github.com/Revan654/staxrip/releases

It's my own modded version with allot of changes to filters and such. Add small little tweaks here and there. Still tweak the filter list, it's hard to test for every combination possible. I Had to update and compile some of the filters myself, They would not run on 64bit machines. Some of the scripts have been tweaked since they would not load. With MCTemporalDenoise being the hardest to get up and running, It would not get along with the other filters.

Revan654 · 18th June 2018, 17:21

Quote:

Originally Posted by Magik Mark

Revan654

Is it possible for you to update the x265 switches as well?

What's a good option for hdr to sdr conversation?

Sent from my iPhone using Tapatalk

I've added the AVX512 to it already. Some of the newer options I need to search more to see how they suppose to work and where there placed. Some of the menu's I'm running out of room to add more options. I might have to add a part to some of the tabs.

If you want a certain option to be added, post what it is and where it's placed. Any details about.

Best option would be the use of a 3Dlut with proper settings applied. That of course requires HDRColor filter and 3Dlut. HDRColor is not a free filter.

The next best option would be HDRtoSDR filter

Link: http://rationalqm.us/board/viewtopic...4e46&start=330

The DGMaptoning Filter also works well ( I kind I prefer it over the newer HDRtoSDR filter).

Link: http://rationalqm.us/mine.html

Use Dither tool to resize if any is needed.

------------

One side note, due to the changes in mediainfo for Master-Display will not auto-load anymore. Since mediainfo removed the color coordinates. It only shows the colorspace now.

I removed ProjectX completely from Staxrip, there are better option to use now then that. Plus who runs java anymore?

Revan654 · 18th June 2018, 18:04

- Last post
- If anyone wants certain filters (must be 64Bit) added to the core. Post what they are with link and there default syntax.
- If anyone has suggestions on any additional features (That can be done within the realm of MVS2017). Do post your suggest and I will take a look and see if it's possible to do.
- or any other changes or tweaks. Post your your suggestions and I will take a look at them.

NikosD · 18th June 2018, 19:04

Hello.

I think there are new versions of QSVEnc v3.06 and NVEnc v4.07.

Maybe you could take a look if they add new switches, as well.

Revan654 · 18th June 2018, 21:41

Quote:

Originally Posted by NikosD

Hello.

I think there are new versions of QSVEnc v3.06 and NVEnc v4.07.

Maybe you could take a look if they add new switches, as well.

Those have already been added. The new version has introduced some issues as well. Mainly with QSVEnc, The documentation is either faulty or code is buggy. It's having problems processing certain colorspace.

NikosD · 18th June 2018, 21:46

Quote:

Originally Posted by Revan654

Those have already been added. The new version has introduced some issues as well. Mainly with QSVEnc, The documentation is either faulty or code is buggy. It's having problems processing certain colorspace.

You could definitely reach the developer (rigaya) he is all ears.

Writing a comment or directly with an email.

https://rigaya34589.blog.fc2.com/blo...y-1031.html?sp

You seem very active and someone who knows what he is talking about.

Revan654 · 18th June 2018, 21:55

Quote:

Originally Posted by NikosD

You could definitely reach the developer (rigaya) he is all ears.

Writing a comment or directly with an email.

https://rigaya34589.blog.fc2.com/blo...y-1031.html?sp

You seem very active and someone who knows what he is talking about.

I did try to contact him, But haven't heard back from him. I even tried by creating a post in the issue section on the project.

I have no idea if there an issue since I don't speak Japanese.

NikosD · 18th June 2018, 22:00

Quote:

Originally Posted by Revan654

I did try to contact him, But haven't heard back from him.

I have no idea if there an issue since I don't speak Japanese.

No that's not an issue.

He speaks English as well, but he is a slow responder sometimes.

Did you email him ?

Revan654 · 18th June 2018, 22:06

Quote:

Originally Posted by NikosD

No that's not an issue.

He speaks English as well, but he is a slow responder sometimes.

Did you email him ?

I believe I did, maybe E-mail didn't all the way through or it was flagged as spam (I use Yahoo).

tyler durdan · 19th June 2018, 13:26

Does this new version support 10 bit HDR conversion for 4k without having to tweak anything?
Thanks

paauw · 19th June 2018, 14:46

Can you update gui options for QSVencc, like LA ICQ and other settings ?

Khun_Doug · 19th June 2018, 15:07

I just downloaded the 1.8.2.0 build. Simple job and setup. Read a HD file, crop it, apply mClean, and PreFetch. Works solid in the older 1.7.0.6 build. In 1.8.2.0 the preview fails and the entire app crashes. If I omit the PreFetch it will preview but ever so slowly. I can screen snip the exception information from the preview if needed.

luigizaninoni · 19th June 2018, 17:48

Quote:

Originally Posted by Khun_Doug

I just downloaded the 1.8.2.0 build. Simple job and setup. Read a HD file, crop it, apply mClean, and PreFetch. Works solid in the older 1.7.0.6 build. In 1.8.2.0 the preview fails and the entire app crashes. If I omit the PreFetch it will preview but ever so slowly. I can screen snip the exception information from the preview if needed.

The same here (crashes even without prefetch)

Another issue with MCTD, says:
cannot load file c:/ .../FFT3DGPU.dll. Platform returned code 126. The specified module could not be found.

Also, the script tries to load both
LoadPlugin("C:\Users\luigi\Desktop\media\Stax1820\Apps\Plugins\avs\FFT3DFilter\fft3dfilter.dll")
LoadPlugin("C:\Users\luigi\Desktop\media\Stax1820\Apps\Plugins\avs\FFT3DGPU\FFT3dGPU.dll")

which seems not necessary

Revan654 · 19th June 2018, 19:51

Quote:

Originally Posted by luigizaninoni

The same here (crashes even without prefetch)

Another issue with MCTD, says:
cannot load file c:/ .../FFT3DGPU.dll. Platform returned code 126. The specified module could not be found.

Also, the script tries to load both
LoadPlugin("C:\Users\luigi\Desktop\media\Stax1820\Apps\Plugins\avs\FFT3DFilter\fft3dfilter.dll")
LoadPlugin("C:\Users\luigi\Desktop\media\Stax1820\Apps\Plugins\avs\FFT3DGPU\FFT3dGPU.dll")

which seems not necessary

There is allot of code in that script, The actual script isn't written by me.

I made some new tweaks hopefully it will help in the long run. It will be included in the next release. That script was nothing but a PIA to get up and running.

The issue is the script sees GPU dll and auto loads it. I believe the script requires it or it will not even load. I have to take a closer look at the script when I get a chance to see what it does.

Platform returned code 126. The specified module could not be found. That happens when you don't have a GPU that supports the filter or wrong syntax for the filter.

Revan654 · 19th June 2018, 19:54

Quote:

Originally Posted by Khun_Doug

I just downloaded the 1.8.2.0 build. Simple job and setup. Read a HD file, crop it, apply mClean, and PreFetch. Works solid in the older 1.7.0.6 build. In 1.8.2.0 the preview fails and the entire app crashes. If I omit the PreFetch it will preview but ever so slowly. I can screen snip the exception information from the preview if needed.

It's mclean, the new version is a bit unstable. Half the time I get a blank screen. I was going to remove it but, people like that filter so I left it in.

Post the script your using and I will test it at my end.

Revan654 · 19th June 2018, 20:00

Quote:

Originally Posted by tyler durdan

Does this new version support 10 bit HDR conversion for 4k without having to tweak anything?
Thanks

The changes I made to this was designed to work with HDR content.

I have loaded a uncompressed 4K HDR file into the software and it loaded without any issues. Just make sure you pick a proper filter for your source file.

*Note* Everything was tested on a Rec.2020 HDR monitor, the picture may be a bit dim due to ST.2084 and not having a HDR monitor. That is normal when view it on a SDR monitor.

18th June 2018, 14:45	#2923 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Revan654 Is it possible for you to update the x265 switches as well? What's a good option for hdr to sdr conversation? Sent from my iPhone using Tapatalk __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

18th June 2018, 19:04	#2928 \| Link
NikosD Registered User Join Date: Aug 2010 Location: Athens, Greece Posts: 2,901	Hello. I think there are new versions of QSVEnc v3.06 and NVEnc v4.07. Maybe you could take a look if they add new switches, as well. __________________ Win 10 x64 (19042.572) - Core i5-2400 - Radeon RX 470 (20.10.1) HEVC decoding benchmarks H.264 DXVA Benchmarks for all

19th June 2018, 14:46	#2935 \| Link
paauw Registered User Join Date: Jun 2018 Posts: 17	QSVencc Can you update gui options for QSVencc, like LA ICQ and other settings ?

18th June 2018, 08:56	#2921 \| Link
Natty Noob Join Date: Mar 2017 Posts: 221	is this official developer of staxrip now? https://github.com/Revan654/staxrip/releases

18th June 2018, 16:48	#2924 \| Link
Taurus Registered User Join Date: Mar 2002 Location: Krautland Posts: 903	@Revan654: Thanks for bringing StaxRip back to life !

18th June 2018, 18:04	#2927 \| Link
Revan654 Registered User Join Date: May 2004 Posts: 324	- Last post - If anyone wants certain filters (must be 64Bit) added to the core. Post what they are with link and there default syntax. - If anyone has suggestions on any additional features (That can be done within the realm of MVS2017). Do post your suggest and I will take a look and see if it's possible to do. - or any other changes or tweaks. Post your your suggestions and I will take a look at them.

19th June 2018, 13:26	#2934 \| Link
tyler durdan Registered User Join Date: Apr 2010 Posts: 13	Does this new version support 10 bit HDR conversion for 4k without having to tweak anything? Thanks

19th June 2018, 15:07	#2936 \| Link
Khun_Doug Registered User Join Date: Jul 2016 Posts: 100	I just downloaded the 1.8.2.0 build. Simple job and setup. Read a HD file, crop it, apply mClean, and PreFetch. Works solid in the older 1.7.0.6 build. In 1.8.2.0 the preview fails and the entire app crashes. If I omit the PreFetch it will preview but ever so slowly. I can screen snip the exception information from the preview if needed.