Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Hardware & Software > Software players

Reply
 
Thread Tools Search this Thread Display Modes
Old 21st September 2015, 16:22   #33001  |  Link
James Freeman
Registered User
 
Join Date: Sep 2013
Posts: 919
Quote:
Originally Posted by James Freeman
Can anyone please test for video freezing after pause and unpause several times.
I will try to find in what version this appeared.

Quote:
Originally Posted by madshi
And you can reproduce this easily with v0.89.x but not at all with v0.88.21? Are you absolutely sure about that?
In that case I'd like to see a debug log with v0.89.3 where this problem occurs.
It's magically solved in 0.89.3.
I have no idea what is the reason and hope it does not come back in future builds, but if you want I can reproduce that in 0.89.2 and send a report.
Or we can lay it aside knowing your list way beyond full, until it pops again (if).

Thanks.
__________________
System: i7 3770K, GTX660, Win7 64bit, Panasonic ST60, Dell U2410.
James Freeman is offline   Reply With Quote
Old 21st September 2015, 17:22   #33002  |  Link
Dlget
Registered User
 
Join Date: Sep 2012
Posts: 53
Can we use nested if else statement for condition??
Without nested statement,there may confusion if many profile & many parameters are checked

ex-
i want to 1st check fps.
then subdivide them into 480p,720p,1080p,4k etc
__________________
Win 7 Ultimate x64
Core i5 2500K 4.2Ghz,Asus p8z68 v pro gen 3
Corsair 2x4GB DDR3 @1600Mhz
Asus Gtx 960 strix OC
Dlget is offline   Reply With Quote
Old 21st September 2015, 18:33   #33003  |  Link
digitech
Registered User
 
Join Date: Jun 2012
Posts: 54
can somebody help me and post a proper MadVR Profile to use 480p,720p,1080p resolutions for all video files please, i haven't found one like that
digitech is offline   Reply With Quote
Old 21st September 2015, 18:59   #33004  |  Link
kasper93
MPC-HC Developer
 
Join Date: May 2010
Location: Poland
Posts: 586
@madshi I find extreme black bars case. BlackBars.mpg This is official DVD release. I just wanted to share a sample for reference. I don't really expect madVR to detect such noisy bars.

Ps. I'm even surprised how bad DVD release can get o_O
kasper93 is offline   Reply With Quote
Old 21st September 2015, 19:01   #33005  |  Link
Asmodian
Registered User
 
Join Date: Feb 2002
Location: San Jose, California
Posts: 4,406
Quote:
Originally Posted by Serhiyko View Post
What can I do then?


Don't think so
Use xySubFilter instead of the internal subtitle renderer.

Quote:
Originally Posted by Dlget View Post
Can we use nested if else statement for condition??
Without nested statement,there may confusion if many profile & many parameters are checked

ex-
i want to 1st check fps.
then subdivide them into 480p,720p,1080p,4k etc
You cannot, also it is possible to be too long if you want to check too many parameters. Do you really need that many though?

How about?:

if (deintFPS > 31) and (srcHeight > 1080) "Fast"
elseif (deintFPS > 31) and (srcHeight > 720) "1080p60"
elseif (deintFPS > 31) and (srcHeight > 480) "720p60"
.
.
else "Fast"

Quote:
Originally Posted by digitech View Post
can somebody help me and post a proper MadVR Profile to use 480p,720p,1080p resolutions for all video files please, i haven't found one like that
I am not sure what you mean. Do you want to have madVR set your monitor resolution based on video resolution?
__________________
madVR options explained
Asmodian is offline   Reply With Quote
Old 21st September 2015, 19:02   #33006  |  Link
avinab
Registered User
 
Join Date: May 2015
Posts: 14
I am on 0.89.3. I am using gtx 980 card latest drivers.But when i am selecting NNEDI3 its showing Jinc3 in OSD.I am using pot player x64.What other setting i have to follow to enable NNEDI3 in windows 10 x64?
avinab is offline   Reply With Quote
Old 21st September 2015, 19:13   #33007  |  Link
Asmodian
Registered User
 
Join Date: Feb 2002
Location: San Jose, California
Posts: 4,406
Quote:
Originally Posted by avinab View Post
I am on 0.89.3. I am using gtx 980 card latest drivers.But when i am selecting NNEDI3 its showing Jinc3 in OSD.I am using pot player x64.What other setting i have to follow to enable NNEDI3 in windows 10 x64?
Nothing special is needed, it is working well for me using a 980Ti, 855.82, and Win10 x64.

Try resetting to defaults (the batch file in madVR directory), and also try deleting the registry key:

HKEY_CURRENT_USER\Software\madshi\madVR\OpenCL
__________________
madVR options explained
Asmodian is offline   Reply With Quote
Old 21st September 2015, 19:35   #33008  |  Link
avinab
Registered User
 
Join Date: May 2015
Posts: 14
Quote:
Originally Posted by Asmodian View Post
Nothing special is needed, it is working well for me using a 980Ti, 855.82, and Win10 x64.

Try resetting to defaults (the batch file in madVR directory), and also try deleting the registry key:

HKEY_CURRENT_USER\Software\madshi\madVR\OpenCL
I did run the batch.In the registry i didn't find OpenCL dword in madvr folder.please suggest what will i do.I uninstalled Madvr and again installed it,still showing jinc AR.Do i have to reinstall nvidia drivers.?
avinab is offline   Reply With Quote
Old 21st September 2015, 19:52   #33009  |  Link
chros
Registered User
 
chros's Avatar
 
Join Date: Mar 2002
Posts: 2,323
Quote:
Originally Posted by Dlget View Post
Nnedi3 not working anywhere not even croma upscaling.
Quote:
Originally Posted by Dlget View Post
MadVR just working fine now....(why?)
It was not working just 4 hours ago here.Now it's working just fine magically.

Nnedi3 is ok.Image doubling is ok
That's pretty interesting: not for me (see my signature, using nvidia), simple Nedi is working, not NNedi3, it crashes MPC-HC immedietly.

Edit: and a huge thanks for the black bar reporting to players! Now it uses less gpu with wide movie content!
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config

Last edited by chros; 21st September 2015 at 20:16.
chros is offline   Reply With Quote
Old 21st September 2015, 19:53   #33010  |  Link
avinab
Registered User
 
Join Date: May 2015
Posts: 14
Quote:
Originally Posted by avinab View Post
I did run the batch.In the registry i didn't find OpenCL dword in madvr folder.please suggest what will i do.I uninstalled Madvr and again installed it,still showing jinc AR.Do i have to reinstall nvidia drivers.?
I reinstalled the nvidia driver.Now nnedi3 is enabled (in OSD)but player fully freezes.i have to kill the player through task manager.
what more i have to do?i can see render and present queue are 0. i have set it to 19.
avinab is offline   Reply With Quote
Old 21st September 2015, 19:56   #33011  |  Link
digitech
Registered User
 
Join Date: Jun 2012
Posts: 54
Quote:
Originally Posted by Asmodian View Post

I am not sure what you mean. Do you want to have madVR set your monitor resolution based on video resolution?
I always have 60 hz Smooth Motion on but on the scaling algorythms profiles i want to be able to have three differents madvr configurations, one for SD (around 480p) HD (720p) and FullHD (1080p) for all kind of video files, not just some of them, i have found some configurations online but in some particular cases they dont apply correctly, example: im playing a sd file but madvr highlights and report like a full HD is playing and viceversa so some configuration must be wrong
digitech is offline   Reply With Quote
Old 21st September 2015, 19:56   #33012  |  Link
yok833
Registered User
 
Join Date: Aug 2012
Posts: 73
Hello Madshi,

I have the same problem with a freeze and black screen immediately when I launch the new built with NNEDI3 (chroma or doubling - no problem with jinc or other..)

here is a link
https://drive.google.com/file/d/0B6N...ew?usp=sharing

Thank you for your support.. can't wait to use NNEDI3 again

Last edited by yok833; 21st September 2015 at 20:00.
yok833 is offline   Reply With Quote
Old 21st September 2015, 20:06   #33013  |  Link
Asmodian
Registered User
 
Join Date: Feb 2002
Location: San Jose, California
Posts: 4,406
Quote:
Originally Posted by avinab View Post
I reinstalled the nvidia driver.Now nnedi3 is enabled (in OSD)but player fully freezes.i have to kill the player through task manager.
what more i have to do?i can see render and present queue are 0. i have set it to 19.
Maybe 19 is too big? Try the defaults, or even lower.

Quote:
Originally Posted by digitech View Post
I always have 60 hz Smooth Motion on but on the scaling algorythms profiles i want to be able to have three differents madvr configurations, one for SD (around 480p) HD (720p) and FullHD (1080p) for all kind of video files, not just some of them, i have found some configurations online but in some particular cases they dont apply correctly, example: im playing a sd file but madvr highlights and report like a full HD is playing and viceversa so some configuration must be wrong
How about this very simple one:

if (srcHeight > 720) "1080p"
elseif (srcHeight > 480) "720p"
else "480p"
__________________
madVR options explained

Last edited by Asmodian; 21st September 2015 at 20:10.
Asmodian is offline   Reply With Quote
Old 21st September 2015, 20:17   #33014  |  Link
avinab
Registered User
 
Join Date: May 2015
Posts: 14
Quote:
Originally Posted by Asmodian View Post
Maybe 19 is too big? Try the defaults, or even lower.



How about this very simple one:

if (srcHeight > 720) "1080p"
elseif (srcHeight > 480) "720p"
else "480p"
tried defaults.but still player freezes but audio keeps on playing.
avinab is offline   Reply With Quote
Old 21st September 2015, 20:26   #33015  |  Link
digitech
Registered User
 
Join Date: Jun 2012
Posts: 54
Quote:
Originally Posted by Asmodian View Post

How about this very simple one:

if (srcHeight > 720) "1080p"
elseif (srcHeight > 480) "720p"
else "480p"
Thank you for your help Asmodian, just need to copy and paste? or do i have to add something after or before in these three lines
digitech is offline   Reply With Quote
Old 21st September 2015, 20:40   #33016  |  Link
Asmodian
Registered User
 
Join Date: Feb 2002
Location: San Jose, California
Posts: 4,406
Quote:
Originally Posted by digitech View Post
Thank you for your help Asmodian, just need to copy and paste? or do i have to add something after or before in these three lines
Just a copy and paste.

Also make sure to have your profiles named 480p, 720p, and 1080p.

Quote:
Originally Posted by avinab View Post
tried defaults.but still player freezes but audio keeps on playing.
I have never used potplayer, have you tried MPC-HC as a test to see if it might be a player setting?

I would also try lowering the queues a lot as a test, 3 or below. Present queues too.

Maybe give Windowed Overlay mode a try?

It is a bit of a mystery as your system is very like mine only I am using Zoom Player instead of potplayer and have a 980Ti.
__________________
madVR options explained

Last edited by Asmodian; 21st September 2015 at 20:51.
Asmodian is offline   Reply With Quote
Old 21st September 2015, 23:29   #33017  |  Link
Hprd
Registered User
 
Join Date: Mar 2011
Posts: 60
Ok, here's a log. Hope this helps.

https://www.dropbox.com/s/qngz0cxw6y...20log.zip?dl=0
Hprd is offline   Reply With Quote
Old 22nd September 2015, 00:08   #33018  |  Link
XRyche
Registered User
 
Join Date: May 2008
Posts: 211
Quote:
Originally Posted by madshi View Post

Don't use admin privileges, just double click it. If that still fails, just do the following manually:

1) rename "madVR.ax" to "madVR [release].ax".
2) rename "madVR [debug].ax" to "madVR.ax".

That's basically all the batch file is doing. When you're done, just undo both renamings.

If I try to run the batch file without giving it Admin rights it says "Access Denied" in all cases.

When I rename the files and run the batch without Admin rights its states:

Access denied
Access denied
Access denied
Access denied

Activating release mode failed
__________________
Intel i5 3470, EVGA GTX 1050Ti SC ACX 2.0, Windows 10 Pro 64 bit, 16 GB 1600 mhz DDR3 RAM
XRyche is offline   Reply With Quote
Old 22nd September 2015, 00:39   #33019  |  Link
Asmodian
Registered User
 
Join Date: Feb 2002
Location: San Jose, California
Posts: 4,406
Quote:
Originally Posted by XRyche View Post
If I try to run the batch file without giving it Admin rights it says "Access Denied" in all cases.

When I rename the files and run the batch without Admin rights its states:

Access denied
Access denied
Access denied
Access denied

Activating release mode failed
If madVR is in program files it needs admin rights.
__________________
madVR options explained
Asmodian is offline   Reply With Quote
Old 22nd September 2015, 02:24   #33020  |  Link
XRyche
Registered User
 
Join Date: May 2008
Posts: 211
Quote:
Originally Posted by Asmodian View Post
If madVR is in program files it needs admin rights.
It is in program files, actually. The issue is that even when i run the batch file with admin rights it says it cannot find madVR.ax. Both madVR.ax and madVR64.ax are both in the same folder as the batch file, plain as day. As they should be.

I've uninstalled, using the uninstall batch file, and deleted the madVR folder and unzipped and used the install batch file 2 or 3 times to make sure I haven't been doing something obviously wrong on my end.
__________________
Intel i5 3470, EVGA GTX 1050Ti SC ACX 2.0, Windows 10 Pro 64 bit, 16 GB 1600 mhz DDR3 RAM
XRyche is offline   Reply With Quote
Reply

Tags
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:43.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.