Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
11th September 2009, 08:00 | #2001 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
@Sharc
thanks, i'll try to debug the called fuctions @Chengbin it can copy audio from avi if allowd muxing in mkv, BUT not in multiqueue. BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
11th September 2009, 20:25 | #2003 | Link |
Registered User
Join Date: Oct 2008
Posts: 46
|
Hi, I just do another test, without specifying 1100MB, leaving your default 700MB and I must say it looks very good...
I think I will left your default setting :-) 1) when I asked about automkv, you said that adding removegrain gives better results... Should I just enable it in advanced options ? 2) Manual says in AVI container you can mux only SRT (textual) subtitles. Subtitles from DVDs are graphical? There is a simple way to make xvid with subtitles not encrusted, starting from dvd? 3) xvid_encraw.exe process on my PC don't saturate the CPU... It stays about 70% ... I have an athlon64x2 4200+ , it's not a monster, but I'd like to use ALL its power :-) 4) eac3to says in its output log: [a05] The Nero decoder doesn't seem to work, will use libav instead. 5) I cannot find a way, eg. a checkbox, to save a logfile of the whole encoding. |
11th September 2009, 21:57 | #2004 | Link |
Registered User
Join Date: Mar 2002
Location: Austria
Posts: 40
|
Have problems now with the correct display ar or movie ar when analyzing dvd sources.
example lotr pal dvd i am getting somthing like this Input File: d:\fulldisc\lotr_two_towers_see_d1\video_ts\vts_01_1.vob ( D:\FullDisc\LOTR_TWO_TOWERS_SEE_D1\VIDEO_TS\VTS_01_0.IFO ) PGC : PGC 1. Length: 1:42:11:06 / chained=1 Codec Video: mpeg Width / Heigh : 720 / 576 Framerate / Framecount: 25.000 / 153275 Duration(hh:mm:ss): 1:42:12 Aspect Ratio: 1.3334 Resized resolution: 716 / 384 Crop Values : 2:80:2:80 dont know whats the problem, i worked in the past perfect! Ascept Ratio should be 2.35:1 All ripped with DVdfab in Full disc mode |
11th September 2009, 22:07 | #2005 | Link |
Registered User
Join Date: Jul 2009
Posts: 104
|
1 success, 1 failure
@buzzqw
I will be trying out the fix you put in back here (Here's the post I created the chapter file myself, and then ran the last line in the bat file and the result looks very good. I'll update later tonight if the fix works as well. |
12th September 2009, 09:51 | #2006 | Link |
Registered User
Join Date: May 2006
Posts: 3,997
|
@buzzqw
There seems to be a bug with the -par for the XviD encoder when I want to resize a video with the original -par of 1:1 to an DVD compliant anamorphic shape. For example, when I crop and resize a .m2ts with an original --sar of 1:1 and tick Anamorphic Shape, the -par for the XviD command line appears as -par 0:0, and XviD_encraw crashes. (When doing similar with an original anamorphic video, the -par is recalculated correctly). Secondly, I have to use AVIMux-GUI v1.17.7, because v1.17.8 which comes with HDC crashes when called from HDC. I am on Vista, and it is known from the AVIMux documentation that v1.17.8 must be run in XP compatibility mode. I enabled XP compatibility mode and can start AVIMux_GUI manually, however it always crashes when HDC wants to start it. Don't know if you can do much about it. Anyway, I can live with the former version 1.17.7 as I don't think that the update to 1.17.8 is critical. Last edited by Sharc; 13th September 2009 at 12:13. |
14th September 2009, 07:39 | #2007 | Link | ||||||||
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
Quote:
Quote:
Quote:
Quote:
Quote:
you are right. isn't possible to save log (and will not be possible) Quote:
Quote:
Quote:
about your queue bug: are you using drag&drop ??? BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
||||||||
14th September 2009, 17:59 | #2008 | Link |
Registered User
Join Date: May 2006
Posts: 3,997
|
The NVTools deinterlacing is working now
There is however still an issue with the -par for XviD. When I resize the original .m2ts to say 720 x 576 by manually overtyping the Height and ticking Anamorphic Shape, the par which is conveyed to the encoder is still 1:1, i.e. it is not recalculated according to my cropping and resizing. (It should be calculated the same way as the --sar for x264). |
15th September 2009, 06:56 | #2009 | Link |
Registered User
Join Date: Dec 2002
Posts: 507
|
I've been going thru the topic with very little luck. I'm trying to convert mkv to wmv and it never encodes. It seems to stop after the audio part. I've seen a few others have similar problems but I never saw a solution posted. Even with the link to the other topic there wasnt a solution just people started to ask the person why he is using wmv.
Am I missing something with the wmv conversions? The avs files play fine and converting to mp4 worked ok too. Any help would be great. I've converted in the past with WMNicEnc with good success. I'm running a Vista maching with all tools installed. I have checked my settings in ffdshow too. |
15th September 2009, 07:33 | #2010 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
@Sharc
i don't think i fully understud.. the code is the same for both encoding.. could you redownload the sharc beta ? i added a quick wannabe fix @DMagic1 could you post the make report ? also, opent the avs script with virtualdub , got errors ? try with 2 channels, and without normalize BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
15th September 2009, 14:32 | #2011 | Link |
Registered User
Join Date: Jan 2002
Posts: 210
|
Buzz regarding my bluray encoding problem. The moment I unticked multi thread it started working. Anyway I had posted this problem in x264 thread for which one of them advised instaed of this in the script
SetMemoryMax(512) SetMTMode(2,0) #Source File AVCSource("F:\HDConvertToX\temp\job0\movie.dga") #Applying Resizing GaussResize(1920,1072,0,4,-0,-4,p=75) #Insert Filters As Requested hqdn3d(1) You only need to "disable" the multithreaded opening of the source material ... so your AVS script (taken from the one in the logfile) should read: SetMemoryMax(512) SetMTMode(2,0) SetMTMode(5,0) AVCSource("F:\HDConvertToX\analysis\movie.dga") SetMTMode(2,0) GaussResize(1920,1072,0,4,-0,-4,p=75) hqdn3d(1) Well this script was made by HDC(not sure) so is this correct? http://forum.doom9.org/showthread.ph...49#post1325649 |
15th September 2009, 14:47 | #2012 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
interesting, thanks for this finding..
but i have a doubt.. why only you got this problem ? i too should got this error... i have i suggestion: check your RAM usage. i think your avaiable ram is very low, if not negative while encoding BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
15th September 2009, 20:52 | #2014 | Link |
Registered User
Join Date: Jun 2008
Posts: 3
|
Wrong language flag for my subtitles
After encoding a BluRay movie to x264/.mkv the language flag/titles is always set to Germen.
I have only selected one subtitles every time and that has been Norwegian. After muxing I've got the correct subtitles, but with wrong subtitles flag/title. Is this a bug or am I doing somthing wrong? best regards Andraves |
15th September 2009, 21:26 | #2015 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
please andraves, post the Make Report
BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
16th September 2009, 07:01 | #2016 | Link |
Registered User
Join Date: May 2007
Posts: 54
|
Hi,
I have ts file with two audio channels. I want to encode it with HDC, but when I analyze it just appear audio channel that I was select it during recording. I tried to save file with MPEG-VCR ( Womble ) then encode it, in this case HDC detect other channel, but after encoding process the second audio channel is not work good ( slow & strange sound). Code:
eac3to v3.16 command line: "C:\Documents and Settings\Frozen\Desktop\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "c:\documents and settings\frozen\desktop\2.ts" 1:"C:\Documents and Settings\Frozen\Desktop\HDConvertToX_2.1.458.3528\job0\hdconverttox.m2v" ------------------------------------------------------------------------------ TS, 1 video track, 2 audio tracks, 0:00:11, 50i 1: MPEG2, 576i50 (4:3) 2: MP2, 2.0 channels, 256kbps, 48khz, 40ms 3: MP2, 2.0 channels, 256kbps, 48khz, 40ms [v01] Extracting video track number 1... [v01] Creating file "C:\Documents and Settings\Frozen\Desktop\HDConvertToX_2.1.458.3528\job0\hdconverttox.m2v"... Video track 1 contains 278 frames. eac3to processing took 1 second. Done. Last edited by Frozen-Figo; 16th September 2009 at 07:08. |
16th September 2009, 07:16 | #2017 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
@Frozen-Frigo
please post the Make report you can also try to use NicAudio/SoundOut as Audio decoding BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 |
16th September 2009, 07:18 | #2018 | Link |
Registered User
Join Date: Jun 2008
Posts: 3
|
Here is the Make Report:
Code:
HDConvertToX v.2.1.471.3569 "Isotta" report Input File: h:\bdmv\stream\00002.m2ts ( H:\BDMV\STREAM\00002.m2ts ) Codec Video: avc Width / Heigh : 1920 / 1080 Framerate / Framecount: 23.976 / 148136 Duration(hh:mm:ss): 1:42:59 Aspect Ratio: 1.7778 Resized resolution: 1920 / 800 Crop Values : 0:140:0:140 Start Video Configuration -> Encoding Settings: X264 Slow ; Bitrate= 10000 Encoding Preset: 7 Final Size: 700 Priority: idle Denoise Level: Super Light Set Manual Bitrate: 10000 Video Handling: Force DirectShowSource2 (Haali) -> End Video Configuration Start Audio Configuration -> Audio Codec: Copy Audio Audio Bitrate/Quality: 128 Audio Channels: 2 MP3 Mode: abr Normalize: On Audio handling: Use Eac3to as demuxer Keep only core: On -> End Audio Configuration Full Audio List-> (*** mean selected) NONE *** 4: dts master audio, english, 5.1 channels, 24 bits, 48khz 5: ac3, english, 5.1 channels, 384kbps, 48khz, dialnorm: -27db 6: ac3, english, 2.0 channels, 224kbps, 48khz, dialnorm: -27db 7: dts express, english, 2.0 channels, 24 bits, 96kbps, 48khz -> End Full Audio List Full Subtitle List-> (*** mean selected) NONE 8: subtitle (pgs), english 9: subtitle (pgs), danish 10: subtitle (pgs), dutch 11: subtitle (pgs), finnish *** 12: subtitle (pgs), norwegian 13: subtitle (pgs), swedish 14: subtitle (pgs), english 15: subtitle (pgs), danish 16: subtitle (pgs), dutch 17: subtitle (pgs), finnish *** 18: subtitle (pgs), norwegian 19: subtitle (pgs), swedish 20: subtitle (pgs), dutch 21: subtitle (pgs), english 22: subtitle (pgs), danish 23: subtitle (pgs), finnish *** 24: subtitle (pgs), norwegian 25: subtitle (pgs), swedish -> End Full Subtitle List Mux Subtitle in MP4/MKV file: On Start Advanced AviSynth -> ColorMatrix: On -> End Advanced AviSynth Start Queue -> prompt $d $t $_$P$G "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "h:\bdmv\stream\00002.m2ts" 12:"C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_12.sup" 18:"C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_18.sup" 24:"C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_24.sup" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "h:\bdmv\stream\00002.m2ts" 4: "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox-pid4.dts" -core java -jar "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\BDSup2Sub.jar" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_12.sup" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_12.idx" /res:1080p java -jar "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\BDSup2Sub.jar" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_18.sup" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_18.idx" /res:1080p java -jar "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\BDSup2Sub.jar" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_24.sup" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_24.idx" /res:1080p "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 1 --bitrate 10000 --preset slow --tune film --sar 1:1 --output "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.h264" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.avs" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 2 --bitrate 10000 --preset slow --tune film --sar 1:1 --output "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.h264" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.avs" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "h:\bdmv\stream\00002.m2ts" 1:"C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\chapters.txt" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\applications\mkvmerge.exe" -o "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\hdconverttox_full_00002.mkv" --default-duration 0:23.976fps "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.h264" --language -1:eng "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox-pid4.dts" --default-track -1:no "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_12.idx" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_18.idx" "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdencodertox__subs_24.idx" --chapters "C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\chapters.txt" --title "Done with HDConvertToX v.2.1.471.3569 _Isotta_" -> End Queue AviSynth Script -> Working with files: C:\Users\HTPC\Desktop\HDConvertToX_2.1.458.3528\job1\hdconverttox_00002.avs DSS2("h:\bdmv\stream\00002.m2ts",fps=23.976) last = isRGB(last) ? ConvertToYV12(last) : last last = isYUY2(last) ? ConvertToYV12(last) : last LanczosResize(1920,800,0,140,-0,-140) hqdn3d(1) -> End AviSynth Script |
16th September 2009, 07:37 | #2019 | Link |
HDConvertToX author
Join Date: Nov 2003
Location: Cesena,Italy
Posts: 6,552
|
Hi Andraves
ths .idx files contains the language tag, and this tag is taken from mkvmerge while muxing i can guess that when BDSup2Sub convert your BD SUP to DVD SUB it set language to german... i will check on BDSup2Sub thread http://forum.doom9.org/showthread.php?t=145277 EDIT -> look here http://forum.doom9.org/showthread.ph...61#post1300861 EDIT2: maybe i added a workaround please try this build: http://www.64k.it/andres/data/hdconv...beta-sharc.exe it should detect Norwegian language BHH
__________________
HDConvertToX: your tool for BD backup MultiX264: The quick gui for x264 AutoMen: The Mencoder GUI AutoWebM: supporting WebM/VP8 Last edited by buzzqw; 16th September 2009 at 07:50. |
16th September 2009, 09:14 | #2020 | Link |
Registered User
Join Date: Oct 2008
Posts: 46
|
I had encoded a movie where the "intro screen" was of a different aspect ratio than the rest of the movie..
So I have black bars in all the movie except the intro. I think it would be better to remove them. Trying with visual crop I find that I need to crop 70 up and 70 down to remove bars, can this be ok? Usually I never find HDC cropping so much... Thank you |
Tags |
bluray, hdc, hdconverttox, m2ts, network media tank, playstation, x264 gui |
|
|