HDConvertToX v. 3.0 (14/10/2010)

[whipdancer]

Originally Posted by rickatnight11

Generally the main movie is only one of those m2ts files. The rest are the bonus extras on the disk. Your call, though.

Apparently this is one of those BD movies that doesn't have a single m2ts file for the main movie. It's got about 100 different m2ts files, the largest of which is about 2gb in size.

[whipdancer]

Here's the make report

HDConvertToX v.2.1.465.3552 "Isotta" report

Input File: d:\gran torino\bdmv\stream\00004.m2ts ( D:\GRAN TORINO\BDMV\STREAM\00004.m2ts )
Codec Video: vc-1
Width / Heigh : 1920 / 1080
Framerate / Framecount: 23.976 / 167706
Duration(hh:mm:ss): 1:56:35
Aspect Ratio: 1.7778
Resized resolution: 1920 / 800
Crop Values : 0:140:0:140

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Bitrate= 8000
Encoding Preset: 6
Final Size: 700
Priority: idle
Denoise Level: Super Light
Set Manual Bitrate: 8000
Video Handling: Use Best Decoder
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 64
Audio Channels: Original
MP3 Mode: abr
Normalize: On
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 3: truehd/ac3, english, 5.1 channels, 48khz, dialnorm: -27db
4: ac3, english, 5.1 channels, 640kbps, 48khz, dialnorm: -27db
5: ac3, french, 5.1 channels, 640kbps, 48khz, dialnorm: -27db
6: ac3, spanish, 5.1 channels, 640kbps, 48khz, dialnorm: -27db
7: ac3, portuguese, 5.1 channels, 640kbps, 48khz, dialnorm: -27db

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
8: subtitle (pgs), english
9: subtitle (pgs), french
10: subtitle (pgs), spanish
11: subtitle (pgs), portuguese
12: subtitle (pgs), english
13: subtitle (pgs), french
14: subtitle (pgs), spanish

-> End Full Subtitle List

Encrust Subtitle in Video file: On

Start Advanced AviSynth ->
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
prompt $d $t $_$P$G

"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" "d:\gran torino\bdmv\stream\00004.m2ts" 3: stdout.wav  -normalize  | "C:\Program Files (x86)\hdconvert\applications\neroaacenc.exe" -if - -br 64000 -ignorelength -of "C:\Program Files (x86)\hdconvert\analysis\hdencodertox-pid3.mp4"
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 1 --bitrate 8000  --preset medium --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 2 --no-chroma-me  --tune film  --sar 1:1  --output "C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.h264" "C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.avs"
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 2 --bitrate 8000  --preset medium --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 2 --no-chroma-me  --tune film  --sar 1:1  --output "C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.h264" "C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.avs"
"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" 1:"C:\Program Files (x86)\hdconvert\analysis\chapters.txt"
"C:\Program Files (x86)\hdconvert\applications\mp4box.exe" -add "C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.h264" -fps 23.976  -add "C:\Program Files (x86)\hdconvert\analysis\hdencodertox-pid3.mp4":lang=eng  -chap "C:\Program Files (x86)\hdconvert\analysis\chapters.txt" "C:\Program Files (x86)\hdconvert\hdconverttox_full_00004.mp4"
-> End Queue

AviSynth Script ->
Working with files: C:\Program Files (x86)\hdconvert\analysis\hdconverttox_00004.avs
SetMemoryMax(512)
SetMTMode(2,0)
directshowsource("d:\gran torino\bdmv\stream\00004.m2ts",audio=false)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
GaussResize(1920,800,0,140,-0,-140,p=75)
ColorMatrix(mode="Rec.709->Rec.601")
hqdn3d(1)
-> End AviSynth Script

[flebber]

Whipdancer how did you enable HDC to read the IFO chapter files?

[prospeed]

Hey Guys,
Wondering if I could get some advice as to what has happened with this encode as x264 seems to have stalled...

HDConvertToX v.2.1.465.3552 "Isotta" report

Input File: d:\dayaftertomorrow\bdmv\stream\00001.m2ts ( D:\DAYAFTERTOMORROW\BDMV\STREAM\00001.m2ts )
Codec Video: avc
Width / Heigh : 1920 / 1080
Framerate / Framecount: 23.976 / 574508
Duration(hh:mm:ss): 6:39:22
Aspect Ratio: 1.7778
Resized resolution: 1920 / 1072
Crop Values : 0:4:0:4

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Bitrate= 1498
NMT Compatibility: On
Encoding Preset: 7
Final Size: 8704
Priority: idle
Denoise Level: Super Light
Video Handling: Force DirectShowSource2 (Haali)
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 224
Audio Channels: 6 (5.1)
MP3 Mode: abr
Normalize: On
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 3: dts master audio, english, 5.1 channels, 24 bits, 48khz, -14ms
*** 4: ac3, english, 2.0 channels, 224kbps, 48khz, dialnorm: -27db, 4ms

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
NONE
*** 5: subtitle (pgs), english
*** 6: subtitle (pgs), english

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
prompt $d $t $_$P$G

"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\eac3to.exe" "d:\dayaftertomorrow\bdmv\stream\00001.m2ts" 5:"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_5.sup" 6:"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_6.sup"
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\eac3to.exe" "d:\dayaftertomorrow\bdmv\stream\00001.m2ts" 3: stdout.wav  -normalize  -down6 | "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\neroaacenc.exe" -if - -br 224000 -ignorelength -of "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox-pid3.mp4"
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\eac3to.exe" "d:\dayaftertomorrow\bdmv\stream\00001.m2ts" 4: stdout.wav  -normalize  -down2 | "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\neroaacenc.exe" -if - -br 224000 -ignorelength -of "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox-pid4.mp4"
java -jar "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\BDSup2Sub.jar" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_5.sup" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_5.idx" /res:1080p
java -jar "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\BDSup2Sub.jar" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_6.sup" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_6.idx" /res:1080p
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\x264.exe" --pass 1 --bitrate 2598  --preset medium --bframes 3 --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.h264" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.avs" --level 4.0 
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\x264.exe" --pass 2 --bitrate 2598  --preset medium --bframes 3 --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.h264" "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.avs" --level 4.0 
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\eac3to.exe" "d:\dayaftertomorrow\bdmv\stream\00001.m2ts" 1:"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\chapters.txt"
"C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\applications\mkvmerge.exe" -o "D:\DAYAFTERTOMORROW\BDMV\STREAM\DAY_AFTER_TOMORROW.MKV" --default-duration 0:23.976fps  "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.h264"   --language -1:eng "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox-pid3.mp4"  --language -1:eng "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox-pid4.mp4" --default-track -1:no   --language -1:eng "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_5.idx"   --language -1:eng "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs_6.idx"  --chapters "C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\chapters.txt"  --title "Done with HDConvertToX v.2.1.465.3552 _Isotta_" 
-> End Queue

AviSynth Script ->
Working with files: C:\Users\ \Downloads\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.avs
DSS2("d:\dayaftertomorrow\bdmv\stream\00001.m2ts",fps=23.976)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
LanczosResize(1920,1072,0,4,-0,-4)
hqdn3d(1)
-> End AviSynth Script

Also:

Writing C:\Users\Downloads\HDConvertToX_2.0.424.3356\job1\hdencodertox__subs
_6.idx

Conversion of 1 file(s) finished

Tue 01/09/2009 12:04:14.26
C:\Users\Downloads\HDConvertToX_2.0.424.3356\job1>"C:\Users\Downloads\HD
ConvertToX_2.0.424.3356\applications\x264.exe" --pass 1 --bitrate 2598  --preset
 medium --bframes 3 --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto
--me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Users\Downloads
\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.h264" "C:\Users\Downloads
\HDConvertToX_2.0.424.3356\job1\hdconverttox_00001.avs" --level 4.0
avis [info]: 1920x1072 @ 23.98 fps (574505 frames)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cach
e64
x264 [info]: cabac=1 ref=1 deblock=1:-1:-1 analyse=0x1:0 me=dia subme=2 psy_rd=0
.0:0.0 mixed_ref=0 me_range=16 chroma_me=0 trellis=0 8x8dct=0 cqm=0 deadzone=21,
11 chroma_qp_offset=0 threads=3 nr=0 decimate=1 mbaff=0 bframes=3 b_pyramid=0 b_
adapt=1 b_bias=0 direct=3 wpredb=1 keyint=250 keyint_min=25 scenecut=40 rc=abr b
itrate=2598 ratetol=1.0 qcomp=0.60 qpmin=10 qpmax=51 qpstep=4 ip_ratio=1.40 pb_r
atio=1.30 aq=1:1.00
x264 [info]: profile Main, level 4.0
[0.0%] 60/574505 frames, 24.40 fps, 15.20 kb/s, eta 6:32:22

[Adub]

Originally Posted by flebber

Whipdancer how did you enable HDC to read the IFO chapter files?

It does it automatically. Just be sure to select the IFO file when converting your DVD.

[Sharc]

Originally Posted by buzzqw

please try this build -> http://www.64k.it/andres/data/hdconv...tToX_sharc.exe

This helps. All vobs are included now. Thanks!

[whipdancer]

Originally Posted by flebber

Whipdancer how did you enable HDC to read the IFO chapter files?

Are you referring to when I convert a DVD? I simply select the Video_TS.ifo (i think that's it) when picking the file. After that I get a prompt from HDC indicating that it's analyzed the ifo file and found the movie/soundtrack.

[flebber]

Originally Posted by Adub

It does it automatically. Just be sure to select the IFO file when converting your DVD.

So when I select Multi Episodes DVD it will automatically read episode chapter files and apply them to muxed output without enabling anything? Or do I need to enable autochapter in hidden options?

[buzzqw]

Originally Posted by whipdancer

Here's the make report

"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" 1:"C:\Program Files (x86)\hdconvert\analysis\chapters.txt

thanks fixed, use live update

Originally Posted by flebber

Whipdancer how did you enable HDC to read the IFO chapter files?

just select your vts_xxxx.ifo
if you select video_ts.ifo, chapter wouldn't be extracted

autochapter is in hdconverttox.ini...

Originally Posted by prospeed

Hey Guys,
Wondering if I could get some advice as to what has happened with this encode as x264 seems to have stalled...

DSS2("d:\dayaftertomorrow\bdmv\stream\00001.m2ts",fps=23.976)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
LanczosResize(1920,1072,0,4,-0,-4)
hqdn3d(1)

you are using DirectShowSource.
Most probably dss isn't feeding frames to encoder.
make sure you have a working decoder for your video

BHH

[flebber]

Originally Posted by buzzqw

thanks fixed, use live update



just select your vts_xxxx.ifo
if you select video_ts.ifo, chapter wouldn't be extracted

autochapter is in hdconverttox.ini...


BHH

so if I change my ini to autochapter=1 then extracted chapters from vts.ifo will be automaticaly applied to final output during muxing?

[prospeed]

Originally Posted by buzzqw

you are using DirectShowSource.
Most probably dss isn't feeding frames to encoder.
make sure you have a working decoder for your video

BHH

Thanks buzzqw

[buzzqw]

Originally Posted by flebber

so if I change my ini to autochapter=1 then extracted chapters from vts.ifo will be automaticaly applied to final output during muxing?

in advanced options there is the autochapter check

BUT if you want that autochapter is alwasy ON, you must use the ini

anyway, you don't have to check autochapter when working with ifo.
select the correct ifo and hdc will extract the chapter file

if you check autochapter it will overwrite the chapters of dvd

BHH

[flebber]

Thanks Buzzqw I fully understand now, you are making it too easy...

[Sharc]

Thanks buzzqw for adding -par x:y to the XviD command line.
Anamorphic encoded XviD streams are now always played back with the correct AR.

[Chengbin]

buzzqw, could you add a function to HDC?

Could you allow multiple videos to be loaded at once? Many times I have to cut a video into multiple parts (as many as 86 once). It is NOT fun building a 86 job queue in HDC (took an hour). You don't need to analyze a script anyway.

Even for videos, a bulk analyze is much more sane (for the lack of better word). This is especially helpful if I'm encoding multiple videos with the same settings.

Oh, don't tell me to use Avisynth, because I need to use different settings for them.

Thanks.

[Crono141]

As someone who just spent about an hour adding 26 episodes to a queue, I must second Chengbin's request. I'll be doing something similar with a 50+ episode set of anime, and I'm not looking forward to the queueing.

Any possibility of mirroring MediaCoder's queue system, or something similar?

But not ripbot's. Takes way to damn long to analyze, and you have to do it one at a time. Blarg...

[buzzqw]

Originally Posted by Chengbin

buzzqw, could you add a function to HDC?

Could you allow multiple videos to be loaded at once? Many times I have to cut a video into multiple parts (as many as 86 once). It is NOT fun building a 86 job queue in HDC (took an hour). You don't need to analyze a script anyway.

Even for videos, a bulk analyze is much more sane (for the lack of better word). This is especially helpful if I'm encoding multiple videos with the same settings.

Oh, don't tell me to use Avisynth, because I need to use different settings for them.

Thanks.

Originally Posted by Crono141

As someone who just spent about an hour adding 26 episodes to a queue, I must second Chengbin's request. I'll be doing something similar with a 50+ episode set of anime, and I'm not looking forward to the queueing.

Any possibility of mirroring MediaCoder's queue system, or something similar?

But not ripbot's. Takes way to damn long to analyze, and you have to do it one at a time. Blarg...

and i should suppose that every files loaded share the same proprieties ? (lenght, fps, width/height, kind of streams...)

BHH

[buzzqw]

very beta build: http://www.64k.it/andres/data/hdconv...rtToX-beta.exe

added support for "quick queqing"

after first file, HDC will ask if next loaded file(s) share same proprieties as file before

BHH

[Chengbin]

buzzqw, thank you

Is this possible in "quick queuing" mode?

[buzzqw]

not now, you must add one file at time

BHH