RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[pacaveli211]

I know it's there
"Attachments Pending Approval" (which means it can't be opened until it's approved)
I just don't understand why you'd put it in a word doc
photo attachments may not require approval....or microsoft office
but you'd just want to upload to an image hosting site anyways

[Atak_Snajpera]

It's there, it's a screen shot saved into a word doc...are you having trouble opening it?

it would be even better if you compressed that .doc to rar with password and split file in 100 pieces...

[Mr. Monte]

Originally Posted by Atak_Snajpera

@Mr. Monte
Normalize 100% increases volume to safe maximum volume (dynamic range is preserved). Everything above is not recommended because it causes distortion in sound. 200% was only added for PSP users because internal speakers are very weak.


new version will check and force Haali media splitter for supported extensions (.ts .mts .m2ts .mp4 .mov and so on)

Atak,

I re-encoded a movie last night using the 100% option. It still too low for my likening. I compared it to another encode of the same movie I did with the latest [spam]. It has by default the AAC audio encode set to 125%.

Would you mind considering allowing th euser of your GUI to be able to adjust the audio boost level? (rename it from normalize to audio boost)

TIA

[rendez2k]

OK, just installed RB on my new Win 7 64bit machine. When I add an MKV and the streams are demuxed, the correct length and frames are reported. Whem the encode starts, only the first 7000 or so frames are encoded. I've tried 2 or 3 MKVs with the same results. Any ideas?!



G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\bepipe\bepipe.exe" --script "import(^G:\temp\RipBot264temp\job1\job1.avs^)" | "C:\Program Files (x86)\RipBot264v1.16.1\Tools\enc_aacPlus\enc_aacPlus.exe" - "G:\temp\RipBot264temp\audio.aac" --lc --br 327680 --mpeg4aac

***************************************

BePipe by dimzon

***************************************

Script used:

# BEGIN

import("G:\temp\RipBot264temp\job1\job1.avs")

# END





Scanning for Audio Stream...

Found Audio Stream

Channels=6, BitsPerSample=16, SampleRate=48000Hz

Writing Header...

Writing Data...

0%
Done!



********************************************************************

* AACPlus v2 Encoder (using Winamp enc_aacplus.dll and nscrt.dll)

* Coding Technologies encoder 8.0.3

* Build Oct 10 2009, 16:03:17

********************************************************************



Input file: -

Output file: G:\temp\RipBot264temp\audio.aac

SampleRate: 48000

ChannelCount: 6

BitsPerSample: 16

Bitrate: 320000

ChannelMode: Multichannel

Engine: LC-AAC

Tune For Speech: No

PNS: No

MP4 Output: No

Encoding...
Finalizing...
Done


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot264v1.16.1\tools\x264\x264_x64.exe" --pass 1 --bitrate 235932 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 6938 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

y4m [info]: 1920x1080p 1:1 @ 10000000/417083 fps (cfr)

x264 [warning]: max bitrate less than average bitrate, assuming CBR

x264 [info]: using SAR=1/1

x264 [warning]: VBV bitrate (235932) > level limit (20000)

x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2

x264 [info]: profile Main, level 4.0
G:\temp\RipBot264temp\job1\job1.avs: 1920x1080, 10000000/417083 fps, 6938 frames

x264 [info]: frame I:78 Avg QP:10.25 size:420331

x264 [info]: frame P:4114 Avg QP:10.33 size:402686

x264 [info]: frame B:2746 Avg QP:10.72 size:275529

x264 [info]: consecutive B-frames: 31.8% 41.0% 10.5% 16.7%

x264 [info]: mb I I16..4: 41.5% 0.0% 58.5%

x264 [info]: mb P I16..4: 44.2% 0.0% 0.0% P16..4: 26.1% 0.0% 0.0% 0.0% 0.0% skip:29.8%

x264 [info]: mb B I16..4: 13.6% 0.0% 0.0% B16..8: 39.6% 0.0% 0.0% direct:11.4% skip:35.4% L0:20.6% L1:22.2% BI:57.2%

x264 [info]: coded y,uvDC,uvAC intra: 92.4% 85.5% 74.9% inter: 46.8% 38.8% 24.3%

x264 [info]: i16 v,h,dc,p: 11% 8% 57% 24%

x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 16% 23% 5% 13% 6% 8% 6% 10%

x264 [info]: i8c dc,h,v,p: 56% 20% 15% 9%

x264 [info]: Weighted P-Frames: Y:0.8%

x264 [info]: kb/s:67623.28



encoded 6938 frames, 40.10 fps, 67623.28 kb/s


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot264v1.16.1\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot264v1.16.1\tools\x264\x264_x64.exe" --pass 2 --bitrate 235932 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 6938 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

y4m [info]: 1920x1080p 1:1 @ 10000000/417083 fps (cfr)

x264 [warning]: max bitrate less than average bitrate, assuming CBR

x264 [info]: using SAR=1/1

x264 [warning]: VBV bitrate (235932) > level limit (25000)

x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2

x264 [warning]: target: 235932.00 kbit/s, expected: 67628.47 kbit/s, avg QP: 10.0000

x264 [warning]: try reducing target bitrate or reducing qp_min (currently 10)

x264 [info]: profile High, level 4.0
G:\temp\RipBot264temp\job1\job1.avs: 1920x1080, 10000000/417083 fps, 6938 frames

x264 [info]: frame I:78 Avg QP:10.26 size:360239

x264 [info]: frame P:4114 Avg QP:10.34 size:362305

x264 [info]: frame B:2746 Avg QP:10.67 size:251862

x264 [info]: consecutive B-frames: 31.8% 41.0% 10.5% 16.7%

x264 [info]: mb I I16..4: 29.7% 56.7% 13.6%

x264 [info]: mb P I16..4: 4.3% 34.5% 9.0% P16..4: 10.0% 8.0% 2.9% 0.7% 0.5% skip:30.0%

x264 [info]: mb B I16..4: 0.9% 8.3% 4.4% B16..8: 21.3% 13.7% 7.6% direct: 7.1% skip:36.6% L0:37.9% L1:29.6% BI:32.6%

x264 [info]: 8x8 transform intra:70.0% inter:46.0%

x264 [info]: coded y,uvDC,uvAC intra: 93.6% 89.7% 81.2% inter: 40.1% 35.5% 22.6%

x264 [info]: i16 v,h,dc,p: 31% 10% 30% 28%

x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 8% 10% 39% 7% 8% 7% 8% 7% 8%

x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 14% 22% 9% 10% 8% 9% 8% 10%

x264 [info]: i8c dc,h,v,p: 54% 20% 15% 10%

x264 [info]: Weighted P-Frames: Y:0.8%

x264 [info]: ref P L0: 58.0% 13.1% 20.7% 8.2% 0.1%

x264 [info]: ref B L0: 83.0% 17.0%

x264 [info]: kb/s:61104.27



encoded 6938 frames, 9.09 fps, 61104.27 kb/s


G:\>"C:\Program Files (x86)\RipBot264v1.16.1\tools\mp4box\mp4box.exe" -tmp "G:\temp\RipBot264temp" -add "G:\temp\RipBot264temp\video.264":name="Coll" -fps 23.976 -add "G:\temp\RipBot264temp\audio.aac":lang=eng -mpeg4 -new "G:\Coll.mp4"

AVC-H264 import - frame size 1920 x 1080 at 23.976 FPS

Import results: 6938 samples - Slices: 78 I 4114 P 2746 B - 7012 SEI - 73 IDR

AAC import - sample rate 48000 - MPEG-4 audio - 6 channels

Saving G:\Coll.mp4: 0.500 secs Interleaving

-------------------------

Elapsed Time: 00h:16m:54s

[Atak_Snajpera]

What's audio duration reported in ripbot

BTW. What is this???

-bitrate 235932

[rendez2k]

OK, I re-installed RB in case there was an issue. I then re-added the MKV as I didn't notice the audio length before. Audio is correctly being reported. But now, it just sits there initializing and not starting the encode!

As for the bitrate, I've no idea. All I told RB to do is a 2-pass encode, fit to HD res and DL DVD size.

Edit: OK, looks like the initaliaztion issue is due to me changing the output path or the location of RipBot? Does it store settings in the registry?



G:\>"C:\Program Files (x86)\RipBot\tools\bepipe\bepipe.exe" --script "import(^G:\temp\RipBot264temp\job1\job1.avs^)" | "C:\Program Files (x86)\RipBot\Tools\enc_aacPlus\enc_aacPlus.exe" - "G:\temp\RipBot264temp\audio.aac" --lc --br 327680 --mpeg4aac

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot\tools\x264\x264_x64.exe" --pass 1 --bitrate 9173 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 172535 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\avs2yuv\pipebuf.exe" "C:\Program Files (x86)\RipBot\tools\avs2yuv\avs2yuv.exe" "G:\temp\RipBot264temp\job1\job1.avs" - : "C:\Program Files (x86)\RipBot\tools\x264\x264_x64.exe" --pass 2 --bitrate 9173 --stats "G:\temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 172535 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --stdin y4m --output "G:\temp\RipBot264temp\video.264" - : 2

The system cannot find the path specified.


G:\>"C:\Program Files (x86)\RipBot\tools\mp4box\mp4box.exe" -tmp "G:\temp\RipBot264temp" -add "G:\temp\RipBot264temp\video.264":name="Coll" -fps 23.976 -add "G:\temp\RipBot264temp\audio.aac":lang=fre -mpeg4 -new "G:\Coll.mp4"

The system cannot find the path specified.
-------------------------

Elapsed Time: 00h:00m:00s

[fAy01]

I tried to convert anime with Ripbot and it still does not work.

1-- Ive tried editing the script to 23.976 like you told me to it didn't work.
2-- Decimate it didn't work.
3-- Assume FPS it didn't work.
4-- Inverse Telecine it didn't work.
5-- Convert FPS it didn't work.

Would you mind encoding it!

Sample
http://www.mediafire.com/download.php?knqojyzmzmy

Rip
http://www.mediafire.com/download.php?nmynzmewljq

[Atak_Snajpera]

video=DirectShowSource("C:\Users\Dawid\Desktop\NS93_[SAMPLE].mkv",audio=false,convertfps=true).ConvertToYV12()

modify script and everything will be ok.

[fAy01]

hey can you also add a drop down menu for fps and add the option same as source and a batch mode option too!!!

[Atak_Snajpera]

http://www.mediafire.com/file/mmfwdz1zmyg/NS93_[SAMPLE].mp4

[fAy01]

Originally Posted by Atak_Snajpera

http://www.mediafire.com/file/mmfwdz1zmyg/NS93_[SAMPLE].mp4

where are the subs and please convert it to mkv!

[Atak_Snajpera]

why don't you encode yourself? I just added convertfps=true so you can do the same.

[fAy01]

Originally Posted by Atak_Snajpera

why don't you encode yourself? I just added convertfps=true so you can do the same.

I modified the script like you said and it still didn't work. I encoded the the same file with Vidcoder and it works!

Do you want me to upload the modified script and the encode!!

[essential]

i searched this thread, and saw versions of this question asked, but never found a solid answer. is it possible to encode to 720p without black bars?

i notice the black bars on fixed on the outputted file, making it exactly 1280x720. what if you don't want black bars at all? for example, i was converting a 1080p movie rip that i calculated to be a 1280x544 image (without black bars) when 720p. i selected the high profile (4.0) then under properties i go to "do not crop" and "size = custom (x,xx:1)" and i input 1280x544.

the resulting file just squishes the picture and makes the black bars larger, instead of just encoding the video stream itself down to 1280x544, without black bars. what am i doing wrong?

does ripbot add the black bars just to make it easier to encode for the user as i've read in previous posts, or is there some benefit to the monitor/screen to have it perfectly 1280x720 already? i just know if i'm watching something in windowed mode on my laptop, i'd rather not have the black bars, they take up extra space that's unnecessary.

side question:
ripbot 1.16.0 & 1.16.1 won't take my demuxed .264 video files, nothing happens when i load them, i have to use 1.15.1 to encode HD stuff, but 1.16.0&1 take my .vob files just fine. any ideas?

[Atak_Snajpera]

Crop borders and then select custom (2.35:1)

[fAy01]

Originally Posted by Atak_Snajpera

Crop borders and then select custom (2.35:1)

what about my question

[Atak_Snajpera]

Do you want me to upload the modified script and the encode!!

Let's see what you get with added convertfps=true

[fAy01]

Originally Posted by Atak_Snajpera

Let's see what you get with added convertfps=true

I think last time I did something wrong my mistake it works now!!!

[asarian]

Originally Posted by bigggt

Man i can't figure out my subtitle problem

I had as issue with Avatar and now 2012 , do i need to install anything else other then ripbot to get the subtitles to burn in.

I select build in picture and then select the subtitle in the temp folder but it never seems to work for me.

i have java so that is not an issue

It would help if you actually said what kind of subtitles you're trying to add.

Check your job's AVS file, and see whether it contains something like:

LoadPlugin("C:\Program Files\AviSynth 2.5\plugins\VSFilter\VSFilter.dll")
video=TextSub(video,"C:\video\mysub.ass")

Also, java?? Are you trying to use actual .SUP files, by any chance? Then you need to install the SupTitle plugin; like:

LoadPlugin("C:\Program Files\AviSynth 2.5\plugins\SupTitle.dll")

video=FFVideoSource("M:\jobs\akira.mkv").ConvertToYV12()
video=SupTitle(video, "M:\jobs\akira_exp.sup", forcedOnly=false, swapCbCr=false, relocate=true, relocOffset="0,0,0,0")

return video

N.B. I always run my .SUP files through BDSup2Sub first, and export to a new SUP file (you'd be surprised how many errors a .SUP file contains on average).

[davidsama]

I have found out that ripbot seems to encode faster and better when i run it in administrator mode in 64 bit windows 7 instead of the default account that you use when you set up your pc.