Scenaid 1.5 (build 45)

D3s7 · 27th March 2005, 02:46

Scenaid 1.5 b45 now available for download

Fixes/Changes:

More BoV Fixes / Changes
Fix for audio files w/ odd filenames
Audio now dummied by delaycut instead of BeSplit
Pal Dummy files recreated for proper PAL AR/File size (I hope)
Dummy creation is now unique to PGC / Cell - should completely get rid of all the issues w/ palette errors
Fixes to bitrate calc routine not to error if file isn't found
Improvments to the scene allocation routines which were causing .4sec errors in Scenarist
Changes / Additions for proper datafile generation for BatchEncoder

New features:

Asset removal now works - limited to removal of video and all assets associated with - removed assets will be dummied per scene
Bitrate generation now works (Multi-Main movies do not curreently work) - please compare the bitrate you get from Scenaid to the one produced by Doitfast4u and/or RA - so far they seem fairly accurate
Errors requiring user attention are now logged to a seperate logscreen
WAV / PCM Audio is now supported

jarthel · 27th March 2005, 06:41

forgive me for my ignorance, but I looked at the fixes and does this include the fix where a "forced sst" file created and there are no .bmp associated with it?

Thanks

buzzqw · 27th March 2005, 08:15

i run in a problem while converting sub/idx into sst file format as you can see in my discussion with Mpucoder.

http://forum.doom9.org/showthread.ph...threadid=90693

is this problem relevan to to vsconv or to muxman ?

Mpucoder say that is a common error. I don't know.

So: will vsconv update to fix this glitch ?

Thanks

BHH

P.S. : i posted in this section because i use your version of vsrip/vconv, fell free to move to another forum' section.

nicolati · 27th March 2005, 17:23

Thanks a lot for your work!!!
Bye
nicolati

D3s7 · 27th March 2005, 18:48

Quote:

Originally posted by buzzqw
i run in a problem while converting sub/idx into sst file format as you can see in my discussion with Mpucoder.

http://forum.doom9.org/showthread.ph...threadid=90693

is this problem relevan to to vsconv or to muxman ?

Mpucoder say that is a common error. I don't know.

So: will vsconv update to fix this glitch ?

Thanks

I believe I already did take care of that but if not I certainly will

buzzqw · 27th March 2005, 19:56

i just tryed vsconv bundled with Scenaid 1.5 (build 45) and i get the same error

st_format 2
Display_Start non_forced
TV_Type PAL
Tape_Type NON_DROP
Pixel_Area (0 573)
Directory D:\dvdmagic
Subtitle 1
Display_Area (0 2 719 574)
Contrast (15 15 15 0)

PA (0 0 255 === )
E1 (255 0 0 === )
E2 (0 0 0 === )
BG (255 255 255 === )

thanks D3s7

BHH

D3s7 · 27th March 2005, 20:41

Try this one

buzzqw · 27th March 2005, 20:53

Kudos to you D3s7 !!!

now creation of sst file is perfect !!!

PA (0 0 255 = = = )
E1 (255 0 0 = = = )
E2 (0 0 0 = = = )
BG (255 255 255 = = = )

now i had just to copy subs color from ifo to ifo !! (but this is another problems

)

i had succesfully muxed sst with muxman 0.12e !!

Thanks again

BHH

buzzqw · 27th March 2005, 21:00

other related question

In sst file i suppose is possible to specify subs color, isn't it ?

well, could be possible to add a parameter to pass at vsconv for copy color from another ifo ?

BHH

D3s7 · 28th March 2005, 03:00

vsconv doesn't look at ifo's atall... purely the .idx file you point it to....

however you can always modify the palette info in the .idx

buzzqw · 28th March 2005, 07:25

ok, sorry for being blatant

Thanks

BHH

jarthel · 28th March 2005, 12:28

Quote:

Originally posted by jarthel
forgive me for my ignorance, but I looked at the fixes and does this include the fix where a "forced sst" file created and there are no .bmp associated with it?

Thanks

reply would be nice. thanks

D3s7 · 28th March 2005, 14:19

If you didn't see it in the change log then it wasn't changed....

I tested empty subs and couldn't duplicate your issue so there wasn't anything to fix from my side

Next time if you have a problem, report it before you delete the project then maybe we'll have something to work off of

D3s7 · 28th March 2005, 15:59

I forgot to mention this build also adds support for PCM/WAV files.

I'll note it in the top post as well

davemorell · 29th March 2005, 21:49

Hi there!

First of all thank you for your great work

It looks like something messed up with the subtitle color table in this b45 version (earlier versions worked fine, 1.00, b17, b20). In the compiled (with Scenarist 3.0) movie the color table completly changed. I can handle this, but I think you may be interested...

Bye!

D3s7 · 30th March 2005, 01:43

more then likely there was different palettes used in that title... there should have been a note about that in the error log window....

when that's the case, the scenarist default palette is used across the VTS set, in which case the palette info should NOT be copied over for that VTS during the ifoupdate stage..

I'm working w/ trahald to have this be auto detected in batchupdateifo

jarthel · 30th March 2005, 10:03

encountered this with build 45
========
Info Creating DVD Video files
Error Cell "VTS4_Title1_PGC1_PG26_C1" and Cell "VTS4_Title1_PGC1_PG1_C1" in PGC "VTS4_Title1_PGC1" use different color palettes. Please use one color palette for all tracks in the same PGC.
Error PreCheck From DB failed.
Error DVD Video files could not be created
===========
I opened simulation window and instead of yellow text on black outline, the subtitle is colored purple text on blue outline.

I changed the subtitle color using "Tools -> Change Color". I opened simulation window to verify change and it's correctly displaying the subtitle colors.

Proceed to build the DVD and I again encountered the error stated above.

If you need some files to debug, please tell me what files and I'll provide them.

Thanks

Sir Didymus · 30th March 2005, 10:56

Quote:

Originally posted by jarthel
encountered this with build 45
========
Info Creating DVD Video files
Error Cell "VTS4_Title1_PGC1_PG26_C1" and Cell "VTS4_Title1_PGC1_PG1_C1" in PGC "VTS4_Title1_PGC1" use different color palettes. Please use one color palette for all tracks in the same PGC.
Error PreCheck From DB failed.
Error DVD Video files could not be created
===========
...
Thanks

Me got exactely the same error as jarthel...
Three palettes were present (looking in the track editor), one was the scenarist default, one for PGC1, and one for PGC2.

Just one (the first) of the subtitles for PGC1, in the track editor window, was linked to the default palette, instead to the PGC1 palette. In my situation, manually making the right attribution made the whole title correctly compiled...

Cheers,
SD

D3s7 · 30th March 2005, 15:54

I found the issue causing that.... apparently i forgot to update the routine that fixes the dummy cell palette.

It has been corrected and a new build will be out soon

davemorell · 5th April 2005, 07:43

I try to reauthor the movie Big Fish (R2, PAL, contain BOVs). I tried two ways, but Scenarist (3.0.0) always crashed without any word.

1. case: I let ScenAid (1.5 b45) to work with BOVs. Then I tried to import the script into Scenarist, but it crashed during the import process.

2. case: I disabled the BOV support in ScenAid. Now Scenarist imported the script without an error/warning message. (With or without some litle modification) when I wanted to compile the DVD it crashed instantly.

I can reproduce this cases and I can send you some files if you need them for examination.

Bye!

27th March 2005, 02:46	#1 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	Scenaid 1.5 (build 45) Scenaid 1.5 b45 now available for download Fixes/Changes: More BoV Fixes / Changes Fix for audio files w/ odd filenames Audio now dummied by delaycut instead of BeSplit Pal Dummy files recreated for proper PAL AR/File size (I hope) Dummy creation is now unique to PGC / Cell - should completely get rid of all the issues w/ palette errors Fixes to bitrate calc routine not to error if file isn't found Improvments to the scene allocation routines which were causing .4sec errors in Scenarist Changes / Additions for proper datafile generation for BatchEncoder New features: Asset removal now works - limited to removal of video and all assets associated with - removed assets will be dummied per scene Bitrate generation now works (Multi-Main movies do not curreently work) - please compare the bitrate you get from Scenaid to the one produced by Doitfast4u and/or RA - so far they seem fairly accurate Errors requiring user attention are now logged to a seperate logscreen WAV / PCM Audio is now supported __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com Last edited by D3s7; 28th March 2005 at 15:59.

27th March 2005, 20:41	#7 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	Try this one __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

28th March 2005, 03:00	#10 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	vsconv doesn't look at ifo's atall... purely the .idx file you point it to.... however you can always modify the palette info in the .idx __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

28th March 2005, 14:19	#13 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	If you didn't see it in the change log then it wasn't changed.... I tested empty subs and couldn't duplicate your issue so there wasn't anything to fix from my side Next time if you have a problem, report it before you delete the project then maybe we'll have something to work off of __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

28th March 2005, 15:59	#14 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	I forgot to mention this build also adds support for PCM/WAV files. I'll note it in the top post as well __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

27th March 2005, 06:41	#2 \| Link
jarthel plebian Join Date: Nov 2001 Posts: 775	forgive me for my ignorance, but I looked at the fixes and does this include the fix where a "forced sst" file created and there are no .bmp associated with it? Thanks

27th March 2005, 08:15	#3 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	i run in a problem while converting sub/idx into sst file format as you can see in my discussion with Mpucoder. http://forum.doom9.org/showthread.ph...threadid=90693 is this problem relevan to to vsconv or to muxman ? Mpucoder say that is a common error. I don't know. So: will vsconv update to fix this glitch ? Thanks BHH P.S. : i posted in this section because i use your version of vsrip/vconv, fell free to move to another forum' section.

27th March 2005, 17:23	#4 \| Link
nicolati Registered User Join Date: Feb 2004 Posts: 37	Thanks a lot for your work!!! Bye nicolati

27th March 2005, 19:56	#6 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	i just tryed vsconv bundled with Scenaid 1.5 (build 45) and i get the same error st_format 2 Display_Start non_forced TV_Type PAL Tape_Type NON_DROP Pixel_Area (0 573) Directory D:\dvdmagic Subtitle 1 Display_Area (0 2 719 574) Contrast (15 15 15 0) PA (0 0 255 === ) E1 (255 0 0 === ) E2 (0 0 0 === ) BG (255 255 255 === ) thanks D3s7 BHH

27th March 2005, 20:53	#8 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	Kudos to you D3s7 !!! now creation of sst file is perfect !!! PA (0 0 255 = = = ) E1 (255 0 0 = = = ) E2 (0 0 0 = = = ) BG (255 255 255 = = = ) now i had just to copy subs color from ifo to ifo !! (but this is another problems ) i had succesfully muxed sst with muxman 0.12e !! Thanks again BHH

27th March 2005, 21:00	#9 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	other related question In sst file i suppose is possible to specify subs color, isn't it ? well, could be possible to add a parameter to pass at vsconv for copy color from another ifo ? BHH

28th March 2005, 07:25	#11 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	ok, sorry for being blatant Thanks BHH

29th March 2005, 21:49	#15 \| Link
davemorell Registered User Join Date: Feb 2005 Posts: 15	Subtitle color table Hi there! First of all thank you for your great work It looks like something messed up with the subtitle color table in this b45 version (earlier versions worked fine, 1.00, b17, b20). In the compiled (with Scenarist 3.0) movie the color table completly changed. I can handle this, but I think you may be interested... Bye!

30th March 2005, 01:43	#16 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	more then likely there was different palettes used in that title... there should have been a note about that in the error log window.... when that's the case, the scenarist default palette is used across the VTS set, in which case the palette info should NOT be copied over for that VTS during the ifoupdate stage.. I'm working w/ trahald to have this be auto detected in batchupdateifo __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

30th March 2005, 10:03	#17 \| Link
jarthel plebian Join Date: Nov 2001 Posts: 775	encountered this with build 45 ======== Info Creating DVD Video files Error Cell "VTS4_Title1_PGC1_PG26_C1" and Cell "VTS4_Title1_PGC1_PG1_C1" in PGC "VTS4_Title1_PGC1" use different color palettes. Please use one color palette for all tracks in the same PGC. Error PreCheck From DB failed. Error DVD Video files could not be created =========== I opened simulation window and instead of yellow text on black outline, the subtitle is colored purple text on blue outline. I changed the subtitle color using "Tools -> Change Color". I opened simulation window to verify change and it's correctly displaying the subtitle colors. Proceed to build the DVD and I again encountered the error stated above. If you need some files to debug, please tell me what files and I'll provide them. Thanks

30th March 2005, 15:54	#19 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	I found the issue causing that.... apparently i forgot to update the routine that fixes the dummy cell palette. It has been corrected and a new build will be out soon __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

5th April 2005, 07:43	#20 \| Link
davemorell Registered User Join Date: Feb 2005 Posts: 15	BOV thing I try to reauthor the movie Big Fish (R2, PAL, contain BOVs). I tried two ways, but Scenarist (3.0.0) always crashed without any word. 1. case: I let ScenAid (1.5 b45) to work with BOVs. Then I tried to import the script into Scenarist, but it crashed during the import process. 2. case: I disabled the BOV support in ScenAid. Now Scenarist imported the script without an error/warning message. (With or without some litle modification) when I wanted to compile the DVD it crashed instantly. I can reproduce this cases and I can send you some files if you need them for examination. Bye!