NuMenu4u.2.0.25 - Page 7

Zeul · 4th May 2005, 21:07

Updated version to 2.0.9 - VERY IMPORTANT UPDATE FOR MUXMAN USERS

Angelus · 6th May 2005, 03:17

I have one small problem with NuMenu4u...everytime I have an Angel DVD in my real DVD drive (Angel TV series) I always get an error in NuMenu4u saying this:

Procedure Name: GetIfoLanguages
Module Name: Test

Error Number: 52
Error Description: Bad file name or number
Error Source: Project1
Error Line: 14
Call Stack:
GetIfoLanguages --> Test
LoadTreeView --> Test
ReLoadMenus --> Test
combo1_Click --> MainForm
sListAllDrives --> GlobalFunctions
Form_Activate --> MainForm

If I eject the disc and load up NuMenu, it goes away. It's not a big problem but just thought I would post it, thanks.

Zeul · 8th May 2005, 21:17

New release , several bug fixes and some improvements

Zeul · 8th May 2005, 23:54

Updated to 2.0.10a - quick correction

Oruku Saki · 11th May 2005, 01:38

Like a few others have mentioned, I haven't had NuMenu4u be able to start up more than one CCE pass (CCE versions 2.66.01.07 and 2.67.00.27) since version 2.0.6 was released. It only does the initial analyze and then skips the following 5. I've tried every release since 2.0.5 with no luck. I've attached a zip of log and ecl files from NM4U v2.0.5 and 2.0.10a using CCE 2.67 (I split up the 2.0.5 ecl files into 25 assets per file for easier comparison with the later version files). I can provide more files if needed.. Is there something I'm doing wrong?

Zeul · 11th May 2005, 01:58

just to confirm that in DIF4U you do have multipass VBR set up in the avs script editor

Oruku Saki · 11th May 2005, 02:12

Ah.. you're absolutely right.. I missed that completely. Out of curiosity why was the multipass happening with the older version when DIFU was set on roba? Thanks again.

Zeul · 11th May 2005, 02:14

I am still unsure how Roba works, so NuMenu deaults to multipass instead

Oruku Saki · 11th May 2005, 03:22

hmm.. i can set multipass no problem in dif4u, but when nm4u opens, I look at the avs settings and it is back on roba, and only one pass happens..

Zeul · 12th May 2005, 02:12

avs settings?
i have tried so many combinations of cce encoder from dif4u and every time multipass is set then i get the #of passes i wanted. If roba is selected then the same.
What version of CCE are you using?
The numenu4u encoder settings are not used, if numenu4u has been started by dif4u, Whatever options are selected in dif4u will be used.
Please confirm that if multipass or roba is set in dif4u and the #of passes is set to 6 then cce only runs once. I presume that your cce version is not a basic version (this only has 1 pass plus the vaf creation)

Oruku Saki · 12th May 2005, 02:31

using CCE SP trial version 2.67.0.27 - tried both multipass and roba in dif4u, with various # of passes.. still only one pass by CCE. i can get multipass to work on numenu4u 2.05 and earlier just fine though

Zeul · 12th May 2005, 02:58

I am using the exact same build.
On encoding start i get the cce screen showing pass 1 / 1 while it creates the vaf file. then it clears and restarts with pass 1 / 5.

Total passes = 6

If yours is different send me the log & ecl file

Oruku Saki · 12th May 2005, 03:04

right.. that exactly what i get if i reinstall 2.05 and earlier.. its bizarre.. i don't get the clear and restart for 5 more passes with the later versions. cce just goes on to the next in queue - 1/1 pass only.

i will get back to you with the log and ecl soon -- in the meantime thanks for all the great work

Zeul · 12th May 2005, 23:53

new build
Current release is now 2.0.11

Oruku Saki · 13th May 2005, 01:24

sorry, still same issue with new release. here is the log and ecl (log goes up to the point when eclcce is called) - let me know if theres anything else i can do

TuRiSOft · 13th May 2005, 06:42

Quote:

Originally posted by Zeul
new build
Current release is now 2.0.12

It is 2.0.11 , isn't it? I just finished to DL it !!!

Zeul · 13th May 2005, 09:00

oops. i have corrected that

@Oruku

Please send me the log & ecl (the address is under support)

TuRiSOft · 13th May 2005, 11:47

I want to pop up a little prob. It was there in v.2.0.10 and it is still there in 2.0.11 .

with Harry Potter 1 reg 2 Pal DVD1 if I remux w/MuxMan an error will pop up during the phase when NuMenu re-adds the command infos in the newly authored files (even if I do or don't reencode assets).
Working w/Scenarist does not give any error. I tried all settings.
I also noticed that if I want to keep my settings I got to tick and change all I want (I use to add some filters on AviSynth section) and then close the app. , 'cause if I don't do so and for whatever cause the app crashes (like in the case above) it not retains all the changes I made.

Hoping to be helpful , I can retry all the procedures above and send you the logs and any helpful info , if you want.
I'm asking here what to do only to not fill your mailbox with garbage.
Thanks a lot.

D3s7 · 13th May 2005, 15:09

Make sure you have the latest build of muxman....

or wait a few days for the new build of .15 which fixes quite a few issues

.14 had a few issues w/ navigation packs and wierd bmp locations that caused problems

mpucoder · 13th May 2005, 15:33

If this is the problem Zeul identified and was fixed with 0.15pd then the latest public version, 0.14e, contains the same fix. It is going through final testing right now and should be available for download in an hour.

4th May 2005, 21:07	#121 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	Updated version to 2.0.9 - VERY IMPORTANT UPDATE FOR MUXMAN USERS __________________ NuMenu4u here

8th May 2005, 21:17	#123 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	New release , several bug fixes and some improvements __________________ NuMenu4u here

8th May 2005, 23:54	#124 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	Updated to 2.0.10a - quick correction __________________ NuMenu4u here

11th May 2005, 01:38	#125 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	Single CCE pass since 2.0.6 Like a few others have mentioned, I haven't had NuMenu4u be able to start up more than one CCE pass (CCE versions 2.66.01.07 and 2.67.00.27) since version 2.0.6 was released. It only does the initial analyze and then skips the following 5. I've tried every release since 2.0.5 with no luck. I've attached a zip of log and ecl files from NM4U v2.0.5 and 2.0.10a using CCE 2.67 (I split up the 2.0.5 ecl files into 25 assets per file for easier comparison with the later version files). I can provide more files if needed.. Is there something I'm doing wrong? Last edited by Oruku Saki; 11th May 2005 at 01:42.

11th May 2005, 01:58	#126 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	just to confirm that in DIF4U you do have multipass VBR set up in the avs script editor __________________ NuMenu4u here

6th May 2005, 03:17	#122 \| Link
Angelus Registered User Join Date: Apr 2003 Posts: 511	I have one small problem with NuMenu4u...everytime I have an Angel DVD in my real DVD drive (Angel TV series) I always get an error in NuMenu4u saying this: Procedure Name: GetIfoLanguages Module Name: Test Error Number: 52 Error Description: Bad file name or number Error Source: Project1 Error Line: 14 Call Stack: GetIfoLanguages --> Test LoadTreeView --> Test ReLoadMenus --> Test combo1_Click --> MainForm sListAllDrives --> GlobalFunctions Form_Activate --> MainForm If I eject the disc and load up NuMenu, it goes away. It's not a big problem but just thought I would post it, thanks.

11th May 2005, 02:12	#127 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	Ah.. you're absolutely right.. I missed that completely. Out of curiosity why was the multipass happening with the older version when DIFU was set on roba? Thanks again.

11th May 2005, 02:14	#128 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	I am still unsure how Roba works, so NuMenu deaults to multipass instead __________________ NuMenu4u here

11th May 2005, 03:22	#129 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	hmm.. i can set multipass no problem in dif4u, but when nm4u opens, I look at the avs settings and it is back on roba, and only one pass happens..

12th May 2005, 02:12	#130 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	avs settings? i have tried so many combinations of cce encoder from dif4u and every time multipass is set then i get the #of passes i wanted. If roba is selected then the same. What version of CCE are you using? The numenu4u encoder settings are not used, if numenu4u has been started by dif4u, Whatever options are selected in dif4u will be used. Please confirm that if multipass or roba is set in dif4u and the #of passes is set to 6 then cce only runs once. I presume that your cce version is not a basic version (this only has 1 pass plus the vaf creation) __________________ NuMenu4u here

12th May 2005, 02:31	#131 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	using CCE SP trial version 2.67.0.27 - tried both multipass and roba in dif4u, with various # of passes.. still only one pass by CCE. i can get multipass to work on numenu4u 2.05 and earlier just fine though

12th May 2005, 02:58	#132 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	I am using the exact same build. On encoding start i get the cce screen showing pass 1 / 1 while it creates the vaf file. then it clears and restarts with pass 1 / 5. Total passes = 6 If yours is different send me the log & ecl file __________________ NuMenu4u here

12th May 2005, 03:04	#133 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	right.. that exactly what i get if i reinstall 2.05 and earlier.. its bizarre.. i don't get the clear and restart for 5 more passes with the later versions. cce just goes on to the next in queue - 1/1 pass only. i will get back to you with the log and ecl soon -- in the meantime thanks for all the great work

12th May 2005, 23:53	#134 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	new build Current release is now 2.0.11 __________________ NuMenu4u here Last edited by Zeul; 13th May 2005 at 08:58.

13th May 2005, 01:24	#135 \| Link
Oruku Saki Registered User Join Date: May 2005 Location: MA, USA Posts: 11	sorry, still same issue with new release. here is the log and ecl (log goes up to the point when eclcce is called) - let me know if theres anything else i can do

13th May 2005, 09:00	#137 \| Link
Zeul NuMenu4u Join Date: Nov 2002 Location: England Posts: 1,361	oops. i have corrected that @Oruku Please send me the log & ecl (the address is under support) __________________ NuMenu4u here

13th May 2005, 11:47	#138 \| Link
TuRiSOft DVD-RB Pro Addict !!! Join Date: Feb 2004 Location: Italy Posts: 191	I want to pop up a little prob. It was there in v.2.0.10 and it is still there in 2.0.11 . with Harry Potter 1 reg 2 Pal DVD1 if I remux w/MuxMan an error will pop up during the phase when NuMenu re-adds the command infos in the newly authored files (even if I do or don't reencode assets). Working w/Scenarist does not give any error. I tried all settings. I also noticed that if I want to keep my settings I got to tick and change all I want (I use to add some filters on AviSynth section) and then close the app. , 'cause if I don't do so and for whatever cause the app crashes (like in the case above) it not retains all the changes I made. Hoping to be helpful , I can retry all the procedures above and send you the logs and any helpful info , if you want. I'm asking here what to do only to not fill your mailbox with garbage. Thanks a lot. __________________ http://www.danasoft.com/sig/TuRiSOft.jpg

13th May 2005, 15:09	#139 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	Make sure you have the latest build of muxman.... or wait a few days for the new build of .15 which fixes quite a few issues .14 had a few issues w/ navigation packs and wierd bmp locations that caused problems __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

13th May 2005, 15:33	#140 \| Link
mpucoder Moderator Join Date: Oct 2001 Posts: 3,398	If this is the problem Zeul identified and was fixed with 0.15pd then the latest public version, 0.14e, contains the same fix. It is going through final testing right now and should be available for download in an hour.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode