New ffdshow build (?) - Page 19

bob0r · 25th October 2005, 17:18

updated libavcodec: h.264 custom quantization matrices support
http://cia.navi.cx/stats/project/ffd...essage/6163813

Will compile a new test build for this, once ffdshow.ax compiling with gcc has been fixed.

Revgen · 25th October 2005, 18:01

Is it absolutely neccessary to use GCC?

Can't MSVS or ICL be used instead?

clsid · 25th October 2005, 19:54

http://rapidshare.de/files/6752494/f...clsid.exe.html

bob0r · 25th October 2005, 20:09

Quote:

Originally Posted by Revgen

Is it absolutely neccessary to use GCC?

Can't MSVS or ICL be used instead?

MSVC = buyware and slow
ICL = buyware and not so stable
GCC = free (after optimizes fast(er)) and easily used with mingw and thus easy to automate, and most stable.

absolutely neccessary, no, but its just what we rather use.

@all
"gcc + VMR9 + RGB slowness"
YV12->RGB32 conversion should be fixed now. GCC wasn't
correctly initializing 64-bit __m64 constants.

Getting faster and faster

Revgen · 25th October 2005, 22:53

Quote:

Originally Posted by clsid

http://rapidshare.de/files/6752494/f...clsid.exe.html

Thanks!

I just encoded a file with Sharktooth's EQM matrix. It plays fine with this version.

Koti · 25th October 2005, 23:57

Quote:

updated libavcodec: h.264 custom quantization matrices support

Great news , works perfect so far . Thx to all involved and clsid for the compile.

canuckerfan · 26th October 2005, 03:15

glad to see this project getting attention and dev time. keep it up

Sharktooth · 26th October 2005, 03:27

if you have hard times downloading clsid ffdshow build from rapid share here an alternative download link: http://www.webalice.it/f.corriga/tem...1025-clsid.exe

cc979 · 26th October 2005, 05:52

Quote:

Originally Posted by clsid

@cc979

Could you upload a mp4 file that you encoded? I would like to test it.

the new builds x264 work for me or was it just one of those windows things

but you could test this little.mp4 for me - just to see

because this older.mp4 crashes nero splitter and hali's

test.mp4

marcellus · 26th October 2005, 08:42

Hi, I tried to encode to mpeg2 ("Libavcodec DVD PAL" preset) with ffdshow-20051025-clsid.exe and I get this error:

I got the same error with the previous clsid's build but after I installed a later bob0r icl build (and the error wasn't there) I thought it was a problem with ffdshow itself that got solved and I didn't report anything. But I see I was wrong, the latest clsid build shows the problem too, so it has something to do with the compile itself.

dimzon · 26th October 2005, 10:04

Quote:

Originally Posted by clsid

http://rapidshare.de/files/6752494/f...clsid.exe.html

You are forget about ff_libfaad2.dll again

NOTE! RealAAC DOES NOT SUPPORT ParametricStereo SO WE NEED ff_libfaad2.dll

clsid · 26th October 2005, 10:45

@marcellus
It's an assertion error. I don't think it's a compilation issue. More likely a bug in the code. You should post a bug report at the ffdshow sourceforge page.

marcellus · 26th October 2005, 12:14

Yes, that's what I thought in the first place, but why it happens only with your compiles?

Anyway, I need more details about your compile if I am to forward a bug report.

videomixer9 · 26th October 2005, 12:37

amazing enough someone still encodes to mpeg2 hahaha ...

dragongodz · 26th October 2005, 12:46

Quote:

amazing enough someone still encodes to mpeg hahaha ...

do you encode with xvid or divx ? how about one of the h264 codecs such as x264 or the one with nero recode ? if you answered yes then YOU are encoding to mpeg aswell, part 2 and part 10(respectivly).
or how about all the people using DVD-Rebuilder or DVD2SVCD etc ,are they not "someone's" ?

my point ? your post was not only pointless but also nieve at best.

videomixer9 · 26th October 2005, 12:51

sorry the 2 got lost somewhere, don't take me as a n00b

... I really need a new notebook this ones keyboard is full of food ...

as for gcc compiles ... maybe try some newer snapshots ak.a. 4.0.3 prereleases ... may fix sth. gcc 4.0 itself is just software too and some ppl even manage to break their compiles of gcc

Sharktooth · 26th October 2005, 13:11

Quote:

Originally Posted by dimzon

You are forget about ff_libfaad2.dll again

NOTE! RealAAC DOES NOT SUPPORT ParametricStereo SO WE NEED ff_libfaad2.dll

http://www.webalice.it/f.corriga/temp/ff_libfaad2.7z

dimzon · 26th October 2005, 13:53

Does anibody know how to use FFDSHOW as MPEG2 Video decoder for DVD playback?
It work's fine when I open single VOB using MPC but don't work when I open IFO!

Leak · 26th October 2005, 16:12

Quote:

Originally Posted by dimzon

Does anibody know how to use FFDSHOW as MPEG2 Video decoder for DVD playback?
It work's fine when I open single VOB using MPC but don't work when I open IFO!

Well, I've just given it a go with clsid's latest build and an image of GITS:SAC 2nd GIG Vol. 1 mounted with Daemon Tools - works fine if you

- deactivate the MPEG2 filter in MPC (duh...

)
- choose "libmpeg2" or "libavcodec" as MPEG2 codec in ffdshow
*and*
- activate "DVD decoding (not working yet)" below the list when MPEG2 is selected in the list and make sure "enable speedup tricks" is off if you use libavcodec...

Yeah, you'll get a few glitches until the next keyframe when seeking or at the very end of a VOB or when changing menus, but beside that it plays fine. Using KernelBob with threshold 0 and a 60Hz refresh rate makes it look almost like TV on my TFT...

np: Michael Mayer - Slowfood (Touch)

dimzon · 26th October 2005, 16:17

Quote:

Originally Posted by Leak

activate "DVD decoding (not working yet)" below the list when MPEG2 is selected in the list and make sure "enable speedup tricks" is off if you use libavcodec...

WOW !!!!!!!!!!!!!!!
Thanx a lot !!!

26th October 2005, 03:27	#368 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	if you have hard times downloading clsid ffdshow build from rapid share here an alternative download link: http://www.webalice.it/f.corriga/tem...1025-clsid.exe __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

26th October 2005, 12:37	#374 \| Link
videomixer9 ffdshow fan Join Date: Aug 2005 Location: Germany Posts: 580	amazing enough someone still encodes to mpeg2 hahaha ... Last edited by videomixer9; 26th October 2005 at 12:51.

26th October 2005, 12:51	#376 \| Link
videomixer9 ffdshow fan Join Date: Aug 2005 Location: Germany Posts: 580	sorry the 2 got lost somewhere, don't take me as a n00b ... I really need a new notebook this ones keyboard is full of food ... as for gcc compiles ... maybe try some newer snapshots ak.a. 4.0.3 prereleases ... may fix sth. gcc 4.0 itself is just software too and some ppl even manage to break their compiles of gcc Last edited by videomixer9; 26th October 2005 at 12:54.

26th October 2005, 13:53	#378 \| Link
dimzon BeHappy/MeGUI developer Join Date: Oct 2003 Location: Moscow, Russia Posts: 1,727	Does anibody know how to use FFDSHOW as MPEG2 Video decoder for DVD playback? It work's fine when I open single VOB using MPC but don't work when I open IFO! __________________ BeHappy - AviSynth-based audio transcoding tool Audio encoding via AviSynth On2 VP7 is great in quality but it is unusable for long-term video backup puposes! Sincerely Yours, MCPD/MCTS

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25th October 2005, 17:18	#361 \| Link
bob0r Pain and suffering Join Date: Jul 2002 Posts: 1,337	updated libavcodec: h.264 custom quantization matrices support http://cia.navi.cx/stats/project/ffd...essage/6163813 Will compile a new test build for this, once ffdshow.ax compiling with gcc has been fixed.

25th October 2005, 18:01	#362 \| Link
Revgen Registered User Join Date: Sep 2004 Location: Near LA, California, USA Posts: 1,545	Is it absolutely neccessary to use GCC? Can't MSVS or ICL be used instead?

25th October 2005, 19:54	#363 \| Link
clsid Registered User Join Date: Feb 2005 Posts: 4,863	http://rapidshare.de/files/6752494/f...clsid.exe.html

26th October 2005, 03:15	#367 \| Link
canuckerfan Registered User Join Date: Jul 2005 Posts: 318	glad to see this project getting attention and dev time. keep it up

26th October 2005, 08:42	#370 \| Link
marcellus Registered User Join Date: Mar 2004 Posts: 95	Hi, I tried to encode to mpeg2 ("Libavcodec DVD PAL" preset) with ffdshow-20051025-clsid.exe and I get this error: I got the same error with the previous clsid's build but after I installed a later bob0r icl build (and the error wasn't there) I thought it was a problem with ffdshow itself that got solved and I didn't report anything. But I see I was wrong, the latest clsid build shows the problem too, so it has something to do with the compile itself.

26th October 2005, 10:45	#372 \| Link
clsid Registered User Join Date: Feb 2005 Posts: 4,863	@marcellus It's an assertion error. I don't think it's a compilation issue. More likely a bug in the code. You should post a bug report at the ffdshow sourceforge page.

26th October 2005, 12:14	#373 \| Link
marcellus Registered User Join Date: Mar 2004 Posts: 95	Yes, that's what I thought in the first place, but why it happens only with your compiles? Anyway, I need more details about your compile if I am to forward a bug report.