FairUse Wizard v2.0 !

PatchWorKs · 31st August 2005, 10:29

Quote:

FairUse Wizard 2.0 brings a lot of new features (like support for H264 and VP7 codecs), and solves all known issues. Get FairUse Wizard 2.0 now !

Check it out !!!

UMP · 31st August 2005, 16:00

What does this mean ? Stop crying and just tell exactly _what_ is not working rather than throwing pointless accusations and sentences like "it doesn't work".

Automan · 31st August 2005, 16:11

Hello All,

Firt of All, I want to THANK to UMP, You have done a GREAT work with FU, this program has grow a lot, and now it is even easier as powefull. FU is just great for ripping, great quality, great programmer. My best wishes for YOU UMP. Thank you very much.

For those of you rippers arround the world, I suggest you BUY THIS PROGRAM, come on is just $10, and you support the future development of FU and his mantainer.

Now, for those of you, who have NO MONEY or how to pay to the programmer I have compiled the program, and have NO LIMITATIONS, but I have NO WARRANTIES, I am not a VC++ programmer, i just follow my instincst and compile this version. I seems to be working FOR ME. First Download the FairUse Wizard from his home page. And then replace the FU.EXE whith this one:

http://200.91.178.146/fu/FU.zip

My best regards to all of you, specially to those who help to the rest of us!

Automan · 31st August 2005, 16:20

Hi UMP,

Was MY FAULT, I make a lot of mistakes compiling FU, and I can't express me very good because English is not my native languaje, plese excuse me, I recognize it was MY MISTAKE, you UMP have done a GREAT WORK.

Sorry, I really SORRY.

Wilbert · 31st August 2005, 17:16

I don't know what you wrote in your first post, but i assume it was not nice

It's good that you apologied though, but you should have asked around first.

@UMP,

Quote:

support for H264 and VP7 codecs (...)

Sounds good! Thanks for the great improvements

UMP · 31st August 2005, 17:31

Quote:

Originally Posted by Automan

Hi UMP,

Was MY FAULT, I make a lot of mistakes compiling FU, and I can't express me very good because English is not my native languaje, plese excuse me, I recognize it was MY MISTAKE, you UMP have done a GREAT WORK.

Sorry, I really SORRY.

It's forgotten already.

PatchWorKs · 31st August 2005, 20:45

Quote:

Originally Posted by UMP

What does this mean ? Stop crying and just tell exactly _what_ is not working rather than throwing pointless accusations and sentences like "it doesn't work".

Quote:

Now, for those of you, who have NO MONEY

The peoples that have no money backups DVDs on CDs (or fills their DVDs with more than 4 movies), so i can't understand you.
If you're a builds-freak, please make MOOX-like builds at least !!!

Quote:

Originally Posted by Wilbert

Quote:

support for H264 and VP7 codecs (...)

Sounds good! Thanks for the great improvements

ffVFW encoding sounds better to me (theora, snow, etc, etc, etc)

UMP · 1st September 2005, 10:54

Quote:

Originally Posted by PatchWorKs

PatchWorKs, my first post was not addressed to you but to someone that later deleted his post.

Regards,

ump

Wilbert · 10th September 2005, 14:42

Look here: http://forum.doom9.org/showthread.ph...488#post364488 (modified source included)

danpos · 11th September 2005, 02:31

Quote:

Originally Posted by Wilbert

Look here: http://forum.doom9.org/showthread.ph...488#post364488 (modified source included)

Hi there! I did download the FU2 LE, installed it and so I changed it for your modified one. It isn't working.

I can't go ahead in Wizard after the 'index session' is performed - the button 'Next' isn't working).

JFYI!

CYA!

Automan · 13th September 2005, 01:08

Quote:

Originally Posted by danpos

Hi there! I did download the FU2 LE, installed it and so I changed it for your modified one. It isn't working.

I can't go ahead in Wizard after the 'index session' is performed - the button 'Next' isn't working).

JFYI!

CYA!

Try this version, maybe works for you, It have worked for me well in several times, I hope it help you:

http://200.91.178.146/fu/FU.zip

Best regards to all!

danpos · 13th September 2005, 02:33

@Automan

THX mate! I'll let it a try soon.

Saludos,

Automan · 13th September 2005, 18:33

Hello Everybody,

First of All I want to THANK to UMP for keeping this program UP and Powerfull as Easy to use. Thanks UMP this is the best ONE.

Now for those of you who want to test my build, you can test it, it have no restrictions, but I HAVE NO WARRANTY this version, I HIGHLY RECOMEND YOU BUY THE AUTHORS ONE. You are warned.

This build is updated to the 2.1a Version. My best regards to everybody.

Install the LIGHT VERSION and then overwrite the FU.EXE with This one:

http://200.91.178.146/fu/FU.zip

Automan · 13th September 2005, 22:59

FairUse 2.1a Bug?

Hello All, Maybe I found a BUG or something in the FairUse 2.1a Program, This version Is NOT saving THE RANGE SELECTION, I made may movie selection, i just want to RIP the MOVIE not the credits, so I select from the beggining to the end of THE MOVIE, excluding the credits, SAVE THE QUEUE, and then if I check the RANGE SELECTION in the queue job THE HOLE MOVIE APPEAR, including the credits. I made the same using the 1.2 version and works just fine. I don't know if is just me or if somebody have the same problem?

My best regards to all!

Automan · 13th September 2005, 23:05

A final Quote, The 2.0 Version Don't have the "RANGE SELECTION" problem. Works just fine!

- Regards

31st August 2005, 16:11	#3 \| Link
Automan Registered User Join Date: Dec 2004 Location: Costa Rica Posts: 11	Hello All, Firt of All, I want to THANK to UMP, You have done a GREAT work with FU, this program has grow a lot, and now it is even easier as powefull. FU is just great for ripping, great quality, great programmer. My best wishes for YOU UMP. Thank you very much. For those of you rippers arround the world, I suggest you BUY THIS PROGRAM, come on is just $10, and you support the future development of FU and his mantainer. Now, for those of you, who have NO MONEY or how to pay to the programmer I have compiled the program, and have NO LIMITATIONS, but I have NO WARRANTIES, I am not a VC++ programmer, i just follow my instincst and compile this version. I seems to be working FOR ME. First Download the FairUse Wizard from his home page. And then replace the FU.EXE whith this one: http://200.91.178.146/fu/FU.zip My best regards to all of you, specially to those who help to the rest of us! __________________ Cursor...

31st August 2005, 16:20	#4 \| Link
Automan Registered User Join Date: Dec 2004 Location: Costa Rica Posts: 11	Sorry UMP was My FAULT! Hi UMP, Was MY FAULT, I make a lot of mistakes compiling FU, and I can't express me very good because English is not my native languaje, plese excuse me, I recognize it was MY MISTAKE, you UMP have done a GREAT WORK. Sorry, I really SORRY. __________________ Cursor...

13th September 2005, 18:33	#13 \| Link
Automan Registered User Join Date: Dec 2004 Location: Costa Rica Posts: 11	Hello Everybody, First of All I want to THANK to UMP for keeping this program UP and Powerfull as Easy to use. Thanks UMP this is the best ONE. Now for those of you who want to test my build, you can test it, it have no restrictions, but I HAVE NO WARRANTY this version, I HIGHLY RECOMEND YOU BUY THE AUTHORS ONE. You are warned. This build is updated to the 2.1a Version. My best regards to everybody. Install the LIGHT VERSION and then overwrite the FU.EXE with This one: http://200.91.178.146/fu/FU.zip __________________ Cursor...

13th September 2005, 22:59	#14 \| Link
Automan Registered User Join Date: Dec 2004 Location: Costa Rica Posts: 11	FairUse 2.1a Bug? Hello All, Maybe I found a BUG or something in the FairUse 2.1a Program, This version Is NOT saving THE RANGE SELECTION, I made may movie selection, i just want to RIP the MOVIE not the credits, so I select from the beggining to the end of THE MOVIE, excluding the credits, SAVE THE QUEUE, and then if I check the RANGE SELECTION in the queue job THE HOLE MOVIE APPEAR, including the credits. I made the same using the 1.2 version and works just fine. I don't know if is just me or if somebody have the same problem? My best regards to all! __________________ Cursor...

13th September 2005, 23:05	#15 \| Link
Automan Registered User Join Date: Dec 2004 Location: Costa Rica Posts: 11	A final Quote, The 2.0 Version Don't have the "RANGE SELECTION" problem. Works just fine! - Regards __________________ Cursor...

31st August 2005, 16:00	#2 \| Link
UMP Registered User Join Date: Mar 2003 Posts: 174	What does this mean ? Stop crying and just tell exactly _what_ is not working rather than throwing pointless accusations and sentences like "it doesn't work".

10th September 2005, 14:42	#9 \| Link
Wilbert Moderator Join Date: Nov 2001 Location: Netherlands Posts: 5,579	Look here: http://forum.doom9.org/showthread.ph...488#post364488 (modified source included)

13th September 2005, 02:33	#12 \| Link
danpos BDVD Team Join Date: Dec 2004 Location: Rio de Janeiro - RJ/Brasil Posts: 306	@Automan THX mate! I'll let it a try soon. Saludos,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode