Simple x264/x265 Launcher v2.99 (2020-11-19) - Page 8

LoRd_MuldeR · 8th October 2009, 18:19

Quote:

Originally Posted by ACrowley

I understand. But why do i get only ~4,5fps in 1 pass with your Gui ?
With all other guis or via cmdline i get ~15fps with the same Settings/Source ?

It is technically impossible to get different speed with my GUI compared to other GUI's, unless you are either using a different x264 binary or passing other parameters to x264

But if you don't trust the GUI, copy the full command-line form the log window and run it manually from the command prompt...

ACrowley · 8th October 2009, 18:27

Quote:

Originally Posted by LoRd_MuldeR

It is technically impossible to get different speed with my GUI compared to other GUI's, unless you are either using a different x264 binary or passing other parameters to x264

But if you don't trust the GUI, copy the full command-line form the log window and run it manually from the command prompt...

As i say i use exactly the same Options!

But your gui use the x264 Build and other guis 32Bit rev 1281 thats the one and only difference

LoRd_MuldeR · 8th October 2009, 18:30

Quote:

Originally Posted by ACrowley

As i say i use exactly the same Options!

Do you only select the same options in both GUI's or do both GUI's really pass identical parameters to x264? That's a difference!

Quote:

Originally Posted by ACrowley

But your gui use the x264 Build and other guis 32Bit rev 1281 thats the one and only difference

That's definitely something you should investigate. Exchange the builds and try again

ACrowley · 8th October 2009, 18:37

Quote:

Originally Posted by LoRd_MuldeR

Do you only select the same options in both GUI's or do both GUI's really pass identical parameters to x264? That's a difference!
That's definitely something you should investigate. Exchange the builds and try again

ofcourse..im not stupid.
--preset veryslow --tune grain --bitrate 14800 --level 4.1 --deblock -3:-3 --ref 5 --vbv-bufsize 30000 --vbv-maxrate 40000 --no-dct-decimate --no-fast-pskip --partitions p8x8,b8x8,i4x4,i8x8 --me umh --subme 9

obviously theres something wrong

...but it works with all other x264 guis/cmdline.

I use x264 rev1281 32Bit (tested with megui/Staxrip/Ripbot,x264.exe) and rev1281 x64 in your gui

everytime 14,96fps in 1pass and 4,79fps with your gui

Can somebody reproduce it ?

dstln · 8th October 2009, 20:54

Post the log from the other gui.

Keiyakusha · 8th October 2009, 21:26

ACrowley
Note, that megui's "turbo" first pass probably uses different settings than 1st pass in x264. But I'm not using megui since I found Simple x264 Launcher so I'm not sure what settings MeGui uses now.

LoRd_MuldeR · 9th October 2009, 00:34

Updated x264 to r1281 (JEEB's builds). Download link in first post updated!

ACrowley · 9th October 2009, 08:44

Quote:

Originally Posted by Keiyakusha

ACrowley
Note, that megui's "turbo" first pass probably uses different settings than 1st pass in x264. But I'm not using megui since I found Simple x264 Launcher so I'm not sure what settings MeGui uses now.

as i say i use exactly the same cmdline everytime,also i dont use megui anymore!
Same 1 pass Perfomance with x264.exe via cmdline too since years.
But not with this launcher....i dont know why, strange. Theres something wrong

It looks like the placebo preset in 1pass where the turbo is disabled. I get 4-4fps with placebo in 1 pass too...

But i use the preset very slow ...and the launchers log shows the correct cmdline.

I really want to know Results from other Users. Please can someone test the 2 pass VBR Mode with the same cmdline with this gui ?

Preset: Veryslow
Tuning: Grain
Profile: High
Params: --level 4.1 --deblock -3:-3 --ref 5 --vbv-bufsize 30000 --vbv-maxrate 40000 --no-dct-decimate --no-fast-pskip --partitions p8x8,b8x8,i4x4,i8x8 --me umh --subme 9

Perhaps somebody can reproduce it...im sure its not my fault.

EDIT:
It works

1 pass fps are normal now. I changed nothing but x264 to latest rev1281 techhouse. Same cmdline/Source/AvS as above
However, its strange.In Fact i hade same Perfomance with the older Build via x264.exe. There was something confused here. But now its fine.

By the Way, a autom creation of the output logf Feature woule be nice ? Ofcourse i can manually copy it to clipboard, sure

ACrowley · 11th October 2009, 12:36

Another Question

How can i delete all the old cmdline in the custom cmd scrooll down list ? The List is dozens of entrys long filled with every single cmdline ive used with the gui.

LoRd_MuldeR · 11th October 2009, 14:00

Quote:

Originally Posted by ACrowley

AHow can i delete all the old cmdline in the custom cmd scrooll down list ? The List is dozens of entrys long filled with every single cmdline ive used with the gui.

Not exactly. It only shows the last eight parameters used and it only adds a new item to the list, if the current parameters are different from the previous ones!
This way you don't end up with a bunch of identical items in your history list, if you run several encodes with the very same parameters...

Anyway, you can simply delete all the "history_n" entries in your "%APPDATA%\x264_x64.ini" file or rename/move/delete the entire file, if that makes you feel better

ACrowley · 11th October 2009, 15:35

Quote:

Originally Posted by LoRd_MuldeR

Not exactly. It only shows the last eight parameters used and it only adds a new item to the list, if the current parameters are different from the previous ones!
This way you don't end up with a bunch of identical items in your history list, if you run several encodes with the very same parameters...

Anyway, you can simply delete all the "history_n" entries in your "%APPDATA%\x264_x64.ini" file or rename/move/delete the entire file, if that makes you feel better

THX

LoRd_MuldeR · 13th October 2009, 15:56

Updated x264 to r1292 (Komisar's builds). Download link in first post updated!

ACrowley · 13th October 2009, 20:00

again a request

Cab you add a minimize Button please ?

LoRd_MuldeR · 13th October 2009, 20:18

Quote:

Originally Posted by ACrowley

again a request

Cab you add a minimize Button please ?

Will look for a solution. The "tool window" doesn't have a minimize button. You can use "Minimze" from the taskbar icon for the moment...

ACrowley · 14th October 2009, 06:57

Quote:

Originally Posted by LoRd_MuldeR

Will look for a solution. The "tool window" doesn't have a minimize button. You can use "Minimze" from the taskbar icon for the moment...

Taskbar icon ..ok

Another Thing

A Time Overview/Hint would be nice.
Maybe the Time where you start the encoding and the elapsed Time in the Final Stats

Ofcourse i know its a "simple x264 launcher only" and there are enough frontends out there....

LoRd_MuldeR · 20th October 2009, 22:22

Updated x264 to r1301 (Komisar's builds). Download link in first post updated!

kypec · 21st October 2009, 05:53

LM: Maybe you could add and then regularly update info about which version of x264 is included with your launcher at the first post of this thread also?

LoRd_MuldeR · 21st October 2009, 10:56

Quote:

Originally Posted by kypec

LM: Maybe you could add and then regularly update info about which version of x264 is included with your launcher at the first post of this thread also?

The info is here

Quote:

Last edited by LoRd_MuldeR; Today at 11:54. Reason: Update x264 binaries to r1301

Also you can update x264 yourself. I just update the package now and then, so less experienced users don't get/keep an outdated x264 binary...

kypec · 21st October 2009, 11:14

Sorry, didn't notice that tiny edit notes below. Yeah, I know I can use whatever x264 build instead of packaged one. Just wanted to make it more clear for not so experienced users/visitors of this thread.

Yoshiyuki Blade · 22nd October 2009, 05:08

Droppin by to say thanks for pointing me to this program.

I might switch over to 64-bit encoding finally!

9th October 2009, 00:34	#147 \| Link
LoRd_MuldeR Software Developer Join Date: Jun 2005 Location: Last House on Slunk Street Posts: 13,196	Updated x264 to r1281 (JEEB's builds). Download link in first post updated! __________________ There was of course no way of knowing whether you were being watched at any given moment. How often, or on what system, the Thought Police plugged in on any individual wire was guesswork.

13th October 2009, 15:56	#152 \| Link
LoRd_MuldeR Software Developer Join Date: Jun 2005 Location: Last House on Slunk Street Posts: 13,196	Updated x264 to r1292 (Komisar's builds). Download link in first post updated! __________________ There was of course no way of knowing whether you were being watched at any given moment. How often, or on what system, the Thought Police plugged in on any individual wire was guesswork.

20th October 2009, 22:22	#156 \| Link
LoRd_MuldeR Software Developer Join Date: Jun 2005 Location: Last House on Slunk Street Posts: 13,196	Updated x264 to r1301 (Komisar's builds). Download link in first post updated! __________________ There was of course no way of knowing whether you were being watched at any given moment. How often, or on what system, the Thought Police plugged in on any individual wire was guesswork.

22nd October 2009, 05:08	#160 \| Link
Yoshiyuki Blade Novice x264 User Join Date: Dec 2006 Location: California Posts: 169	Droppin by to say thanks for pointing me to this program. I might switch over to 64-bit encoding finally! __________________ "I'll take a potato chip... and eat it!"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th October 2009, 20:54	#145 \| Link
dstln Person Join Date: Jul 2009 Posts: 58	Post the log from the other gui.

8th October 2009, 21:26	#146 \| Link
Keiyakusha 契約者 Join Date: Jun 2008 Posts: 1,578	ACrowley Note, that megui's "turbo" first pass probably uses different settings than 1st pass in x264. But I'm not using megui since I found Simple x264 Launcher so I'm not sure what settings MeGui uses now.

11th October 2009, 12:36	#149 \| Link
ACrowley Registered User Join Date: Apr 2006 Posts: 1,008	Another Question How can i delete all the old cmdline in the custom cmd scrooll down list ? The List is dozens of entrys long filled with every single cmdline ive used with the gui.

13th October 2009, 20:00	#153 \| Link
ACrowley Registered User Join Date: Apr 2006 Posts: 1,008	again a request Cab you add a minimize Button please ?

21st October 2009, 05:53	#157 \| Link
kypec User of free A/V tools Join Date: Jul 2006 Location: SK Posts: 829	LM: Maybe you could add and then regularly update info about which version of x264 is included with your launcher at the first post of this thread also?

21st October 2009, 11:14	#159 \| Link
kypec User of free A/V tools Join Date: Jul 2006 Location: SK Posts: 829	Sorry, didn't notice that tiny edit notes below. Yeah, I know I can use whatever x264 build instead of packaged one. Just wanted to make it more clear for not so experienced users/visitors of this thread.