Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Video Encoding > MPEG-4 Encoder GUIs

Reply
 
Thread Tools Search this Thread Display Modes
Old 29th August 2009, 05:16   #1881  |  Link
flebber
Practising Schemer
 
Join Date: Feb 2008
Location: Newcastle, Australia
Posts: 791
When I press generate encode nothing is happening? This is my make report.

Code:
HDConvertToX v.2.1.465.3552 "Isotta" report

Input File: c:\rip\source video\domino\au_111676\video_ts\vts_01_1.vob ( C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_0.IFO )
PGC : PGC 1. Length: 2:02:44:00 / chained=1
Codec Video: mpeg
Width / Heigh : 720 / 576
Framerate / Framecount: 25.000 / 184100
Duration(hh:mm:ss): 2:2:45
Aspect Ratio: 1.7778
Resized resolution: 720 / 288
Crop Values : 0:80:0:80

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Bitrate= 877
NMT Compatibility: On
Encoding Preset: 6
Final Size: 800
Priority: idle
Denoise Level: Super Light
Video Handling: Use Best Decoder
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 0.5
Audio Channels: Original
MP3 Mode: vbr
Normalize: On
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 80: English (AC3 6ch, 0xBD 0x80) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
MVDegrain: MVDegrain1
FreeAVS String: VagueDenoiser(threshold=0, method=3, nsteps=6, chromaT=0).asharp(2,4,1)
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
prompt $d $t $_$P$G

"C:\Rip\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_1.vob"+"C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_2.vob"+"C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_3.vob"+"C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_4.vob"+"C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_5.vob" 3: stdout.wav  -normalize  | "C:\Rip\HDConvertToX_2.1.458.3528\applications\neroaacenc.exe" -if - -q 0.5 -ignorelength -of "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdencodertox-pid3.mp4"
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 1 --bitrate 860  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 2 --bitrate 860  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\Chapter\ChapterXtractor.exe" "C:\Rip\Source Video\Domino\AU_111676\VIDEO_TS\VTS_01_0.IFO" "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\chapters.txt" -p5
"C:\Rip\HDConvertToX_2.1.458.3528\applications\mkvmerge.exe" -o "C:\Rip\Produced\Domino.MKV" --default-duration 0:25.000fps  "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdconverttox_vts_01_1.h264"   --language -1:eng  --aac-is-sbr 0:1 "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\hdencodertox-pid3.mp4" --chapters "C:\Rip\HDConvertToX_1.8.332.2935\temp\job0\chapters.txt"  --title "Done with HDConvertToX v.1.9.399.3207" 
-> End Queue

-> End AviSynth Script
flebber is offline   Reply With Quote
Old 29th August 2009, 05:36   #1882  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Some progress, but a stumbling block, too

Ok, so I'm able to analyze and start the process. I've switched and am encoding with H.264 to MP4, 2 pass, AC3 sound.

It looks like everything is working. First pass takes about 4 hours, second pass takes about 6 hours.

Everything looked ok, until the command window closes and there is no MP4 file. I look in the job0 folder and see a 6GB file with h264 extension. The ac3 file is still there as well.

Did I not wait long enough? I thought when the command window closed that it was done.

Is there a specific file that I can look at to see what all has gone on? (I ask because there are several different files that when I open, look like log files to me).
whipdancer is offline   Reply With Quote
Old 29th August 2009, 05:38   #1883  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
Hm, since it's a batch, it's difficult to figure out what happened. Can you attach the batch here? If you want the window to stay open, letting you see all of the messages, you can run it manually from a command prompt. You'll have to wait another 10 hours though, so you might try editing the batch file manually and removing the encoding lines. Since you already have the finished video and audio files, the other lines should create the MP4 file.
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 05:42   #1884  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Here is the bat file. I'm assuming I should be able to just run the last command (the call to mp4box).

Code:
"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" "d:\gran torino\bdmv\stream\00004.m2ts" 3: "C:\Program Files (x86)\hdconvert\job0\hdencodertox-pid3.ac3" -normalize  -down6  -448
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 1 --bitrate 8000  --preset medium --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 2 --no-chroma-me  --sar 1:1  --output "C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264" "C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.avs"
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 2 --bitrate 8000  --preset medium --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 2 --no-chroma-me  --sar 1:1  --output "C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264" "C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.avs"
"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" 1:"C:\Program Files (x86)\hdconvert\job0\chapters.txt"
"C:\Program Files (x86)\hdconvert\applications\mp4box.exe" -add "C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264" -fps 23.976  -add "C:\Program Files (x86)\hdconvert\job0\hdencodertox-pid3.ac3":lang=eng  -chap "C:\Program Files (x86)\hdconvert\job0\chapters.txt" "C:\Program Files (x86)\hdconvert\hdconverttox_full_00004.mp4"
whipdancer is offline   Reply With Quote
Old 29th August 2009, 05:44   #1885  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
I would think so. Run it in "cmd" and see if you get an error.
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 06:36   #1886  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Code:
Microsoft Windows [Version 6.1.7100]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Trent>test.bat

C:\Users\Trent>"C:\Program Files (x86)\hdconvert\applications\mp4box.exe" -add "
C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264" -fps 23.976  -add
 "C:\Program Files (x86)\hdconvert\job0\hdencodertox-pid3.ac3":lang=eng  -chap "
C:\Program Files (x86)\hdconvert\job0\chapters.txt" "C:\Program Files (x86)\hdco
nvert\hdconverttox_full_00004.mp4"
AVC-H264 import - frame size 1920 x 800 at 23.976 FPS
Import results: 167706 samples - Slices: 1582 I 56616 P 109508 B - 1 SEI - 1528
IDR
AC3 import - sample rate 48000 - 6 channels

        Error: Requested URL is not valid or cannot be found
Ok - I'm missing the chapters.txt file.

I've run the prior command from the original batch file, but I get this error:

Source file "C:\Program Files (x86)\hdconvert\job0\chapters.txt" not found.

So I'm assuming that is not where the chapters.txt file is created.

So, when should this file get created?
whipdancer is offline   Reply With Quote
Old 29th August 2009, 07:18   #1887  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
The second to last line (that runs eac3to.exe) from your original batch is supposed to, but you'll notice that something is wrong with it: there is no source file, only the destination. For whatever reason, HDConvertToX isn't generating that line correctly.
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 09:02   #1888  |  Link
flebber
Practising Schemer
 
Join Date: Feb 2008
Location: Newcastle, Australia
Posts: 791
I have changed files I am trying to encode, but this time I cannot encode audio at which point encoding fails.

Code:
HDConvertToX v.2.1.465.3552 "Isotta" report

Input File: c:\rip\hdconverttox_2.1.458.3528\hdc_work\job0\vts_01_1.vob ( C:\Rip\Source Video\QOTSA\FullDisc\QOTSA_PAL\VIDEO_TS\VTS_01_0.IFO )
PGC : PGC 1. Length: 0:17:55:09 / chained=0
Codec Video: mpeg
Width / Heigh : 720 / 576
Framerate / Framecount: 25.000 / 26875
Duration(hh:mm:ss): 0:17:56
Aspect Ratio: 1.3334
Resized resolution: 720 / 544
Crop Values : 0:0:0:0

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Bitrate= 950
NMT Compatibility: On
Encoding Preset: 6
Final Size: 
Priority: idle
Denoise Level: Super Light
Set Manual Bitrate: 950
Video Handling: Force DirectShowSource2 (Haali)
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 0.6
Audio Channels: Original
MP3 Mode: vbr
Normalize: On
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 80: ??? (AC3 2ch, 0xBD 0x80) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
??? 0 (0xBD 0x20) [0]

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
Basic Filter: Undot()
MVDegrain: MVDegrain1
FreeAVS String: VagueDenoiser(threshold=0, method=3, nsteps=6, chromaT=0).asharp(2,4,1)
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
prompt $d $t $_$P$G

"C:\Rip\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "c:\rip\hdconverttox_2.1.458.3528\hdc_work\job0\vts_01_1.vob" 2: stdout.wav  -normalize  | "C:\Rip\HDConvertToX_2.1.458.3528\applications\neroaacenc.exe" -if - -q 0.6 -ignorelength -of "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdencodertox-pid2.mp4"
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 1 --bitrate 950  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 2 --bitrate 950  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\Chapter\ChapterXtractor.exe" "C:\Rip\Source Video\QOTSA\FullDisc\QOTSA_PAL\VIDEO_TS\VTS_01_0.IFO" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\chapters.txt" -p5
"C:\Rip\HDConvertToX_2.1.458.3528\applications\mkvmerge.exe" -o "C:\Rip\Produced\QOTSA.MKV" --default-duration 0:25.000fps  "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264"   --language -1:und  --aac-is-sbr 0:1 "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdencodertox-pid2.mp4" --chapters "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\chapters.txt"  --title "Done with HDConvertToX v.1.9.399.3207" 
-> End Queue

AviSynth Script ->
Working with files: C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.avs
DSS2("c:\rip\hdconverttox_2.1.458.3528\hdc_work\job0\vts_01_1.vob",fps=25.000)
last = isRGB(last) ? ConvertToYV12(last) : last
last = isYUY2(last) ? ConvertToYV12(last) : last
GaussResize(720,544,0,0,-0,-0,p=75)
ColorMatrix(mode="Rec.709->Rec.601")
hqdn3d(1)
Undot()
backward_vec2 = last.MVAnalyse(isb = true, delta = 2, pel = 2, overlap=4, sharp=2, idx = 1)
forward_vec2 = last.MVAnalyse(isb = false, delta = 2, pel = 2, overlap=4, sharp=2, idx = 1)
last.MVDegrain1(backward_vec2,forward_vec2,thSAD=400,idx=1)
VagueDenoiser(threshold=0, method=3, nsteps=6, chromaT=0).asharp(2,4,1)
-> End AviSynth Script
And with totally different file same error.
Code:
HDConvertToX v.2.1.465.3552 "Isotta" report

Input File: c:\rip\hdconverttox_2.1.458.3528\hdc_work\job3\vts_01_1.vob ( C:\Rip\Source Video\RHCP\FullDisc\RHCP\VIDEO_TS\VTS_24_0.IFO )
PGC : PGC 1. Length: 1:20:36:22 / chained=0
Codec Video: mpeg
Width / Heigh : 720 / 576
Framerate / Framecount: 25.000 / 120900
Duration(hh:mm:ss): 1:20:37
Aspect Ratio: 1.3334
Resized resolution: 688 / 528
Crop Values : 20:8:12:8

Start Video Configuration ->
Encoding Settings: X264 Extreme Quality ; Bitrate= 950
NMT Compatibility: On
Encoding Preset: 6
Final Size: 
Priority: idle
Denoise Level: Super Light
Set Manual Bitrate: 950
Video Handling: Use Best Decoder
Deinterlace: Interlaced
-> End Video Configuration

Start Audio Configuration ->
Audio Codec: Nero AAC Audio
Audio Bitrate/Quality: 0.6
Audio Channels: Original
MP3 Mode: vbr
Normalize: On
Audio handling: Use Eac3to as demuxer
Keep only core: On
-> End Audio Configuration

Full Audio List-> (*** mean selected)
NONE
*** 80: English (AC3 2ch, 0xBD 0x80) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
English 0 (0xBD 0x20) [0]
English 1 (0xBD 0x21) [0]

-> End Full Subtitle List

Mux Subtitle in MP4/MKV file: On

Start Advanced AviSynth ->
Basic Filter: Undot()
MVDegrain: MVDegrain1
FreeAVS String: VagueDenoiser(threshold=0, method=3, nsteps=6, chromaT=0).asharp(2,4,1)
ColorMatrix: On
-> End Advanced AviSynth

Start Queue ->
prompt $d $t $_$P$G

"C:\Rip\HDConvertToX_2.1.458.3528\applications\eac3to.exe" "c:\rip\hdconverttox_2.1.458.3528\hdc_work\job0\vts_01_1.vob" 2: stdout.wav  -normalize  | "C:\Rip\HDConvertToX_2.1.458.3528\applications\neroaacenc.exe" -if - -q 0.6 -ignorelength -of "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdencodertox-pid2.mp4"
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 1 --bitrate 950  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\x264.exe" --pass 2 --bitrate 950  --preset medium --trellis 0 --ref 3 --deblock -1,-1 --subme 9 --direct auto --me umh --b-adapt 1 --no-chroma-me  --sar 1:1  --output "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.avs" --level 4.0 
"C:\Rip\HDConvertToX_2.1.458.3528\applications\Chapter\ChapterXtractor.exe" "C:\Rip\Source Video\QOTSA\FullDisc\QOTSA_PAL\VIDEO_TS\VTS_01_0.IFO" "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\chapters.txt" -p5
"C:\Rip\HDConvertToX_2.1.458.3528\applications\mkvmerge.exe" -o "C:\Rip\Produced\QOTSA.MKV" --default-duration 0:25.000fps  "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdconverttox_vts_01_1.h264"   --language -1:und  --aac-is-sbr 0:1 "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\hdencodertox-pid2.mp4" --chapters "C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job0\chapters.txt"  --title "Done with HDConvertToX v.1.9.399.3207" 
-> End Queue

AviSynth Script ->
Working with files: C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job3\hdconverttox_vts_01_1.avs
Mpeg2Source("C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job3\movie.d2v")
TDeint(mode=0,order=-1)
GaussResize(688,528,20,8,-12,-8,p=75)
ColorMatrix(d2v="C:\Rip\HDConvertToX_2.1.458.3528\HDC_Work\job3\movie.d2v")
hqdn3d(1)
Undot()
backward_vec2 = last.MVAnalyse(isb = true, delta = 2, pel = 2, overlap=4, sharp=2, idx = 1)
forward_vec2 = last.MVAnalyse(isb = false, delta = 2, pel = 2, overlap=4, sharp=2, idx = 1)
last.MVDegrain1(backward_vec2,forward_vec2,thSAD=400,idx=1)
VagueDenoiser(threshold=0, method=3, nsteps=6, chromaT=0).asharp(2,4,1)
-> End AviSynth Script

Last edited by flebber; 29th August 2009 at 09:50. Reason: added another make report
flebber is offline   Reply With Quote
Old 29th August 2009, 12:27   #1889  |  Link
Frozen-Figo
Registered User
 
Join Date: May 2007
Posts: 54
I have a strange problem, after some using of HDC, application always stuck at same point during encoding, so I need to extract rar file again.

Code:
D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\eac3to.exe" "c:\dvb\smartdvb\records\jsc sports +220090829-14
_08_19.ts" 1:"D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0\hdconverttox.m2v"
TS, 1 video track, 1 audio track, 0:00:52, 50i
1: MPEG2, 576i50 (4:3)
2: MP2, Arabic, 2.0 channels, 256kbps, 48khz, -369ms
v01 Extracting video track number 1...
v01 Creating file "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0\hdconverttox.m2v
"...
Video track 1 contains 1296 frames.
eac3to processing took 1 second.
Done.

D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\dgindex.exe" -FO=0 -OM=0 -YR=2 -AIF=[D:\My DVB\NEW\HDConvertT
oX_1.8.332.2935\job0\hdconverttox.m2v] -OF=[D:\My DVB\NEW\HDConvertToX_1.8.332.2
935\job0\movie] -exit -minimize

D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\HDC_Deint.exe" -input "c:\dvb\smartdvb\records\jsc sports +22
0090829-14_08_19.ts" -workpath "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0\" -
usedecoder d2v -here "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\"

D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\x264.exe" --threads 0 --bitrate 200 --thread-input --trellis
0 --no-cabac --merange 4 --subme 1 --no-chroma-me --partitions none --me dia --s
ar 1:1 --progress --no-psnr --output "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\jo
b0\createautodeintmovie.h264" "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0\crea
teautodeintmovie.avs"
avis [info]: 32x32 @ 25.00 fps (45 frames)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64
x264 [info]: cabac=0 ref=1 deblock=1:0:0 analyse=0x1:0 me=dia subme=1 psy_rd=0.0
:0.0 mixed_ref=0 me_range=4 chroma_me=0 trellis=0 8x8dct=0 cqm=0 deadzone=21,11
chroma_qp_offset=0 threads=6 thread_queue=6 nr=0 decimate=1 mbaff=0 bframes=0 ke
yint=250 keyint_min=25 scenecut=40 rc=abr bitrate=200 ratetol=1.0 qcomp=0.60 qpm
in=10 qpmax=51 qpstep=4 ip_ratio=1.40 aq=1:1.00
x264 [info]: profile Baseline, level 1.3
x264 [info]: encoded 45 frames, 90.00 fps, 105.28 kb/s
x264 [info]: slice I:3     Avg QP:10.17  size:   776
x264 [info]: slice P:42    Avg QP:10.38  size:   495
x264 [info]: mb I  I16..4:  0.0%  0.0% 100.0%
x264 [info]: mb P  I16..4:  0.0%  0.0%  0.0%  P16..4: 95.2%  0.0%  0.0%  0.0%  0
.0%    skip: 4.8%
x264 [info]: final ratefactor: -1.55
x264 [info]: coded y,uvDC,uvAC intra:100.0% 100.0% 100.0% inter:94.3% 92.3% 86.9
%
x264 [info]: SSIM Mean Y:0.9990100
x264 [info]: kb/s:102.7
encoded 45 frames, 90.00 fps, 105.28 kb/s


D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\x264.exe" --threads 0 --bitrate 200 --thread-input --trellis
0 --no-cabac --merange 4 --subme 1 --no-chroma-me --partitions none --me dia --s
ar 1:1 --progress --no-psnr --output "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\jo
b0\autodeint_ff_movie.h264" "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0\autode
int_ff_movie.avs"
avis [info]: 32x32 @ 25.00 fps (30 frames)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64
x264 [info]: cabac=0 ref=1 deblock=1:0:0 analyse=0x1:0 me=dia subme=1 psy_rd=0.0
:0.0 mixed_ref=0 me_range=4 chroma_me=0 trellis=0 8x8dct=0 cqm=0 deadzone=21,11
chroma_qp_offset=0 threads=6 thread_queue=6 nr=0 decimate=1 mbaff=0 bframes=0 ke
yint=250 keyint_min=25 scenecut=40 rc=abr bitrate=200 ratetol=1.0 qcomp=0.60 qpm
in=10 qpmax=51 qpstep=4 ip_ratio=1.40 aq=1:1.00
x264 [info]: profile Baseline, level 1.3
x264 [info]: encoded 30 frames, 28.65 fps, 80.04 kb/s
x264 [info]: slice I:1     Avg QP:10.50  size:   767
x264 [info]: slice P:29    Avg QP:10.79  size:   369
x264 [info]: mb I  I16..4:  0.0%  0.0% 100.0%
x264 [info]: mb P  I16..4:  2.6%  0.0%  0.0%  P16..4: 89.7%  0.0%  0.0%  0.0%  0
.0%    skip: 7.8%
x264 [info]: final ratefactor: -2.62
x264 [info]: coded y,uvDC,uvAC intra:100.0% 100.0% 100.0% inter:84.7% 84.1% 64.6
%
x264 [info]: SSIM Mean Y:0.9987414
x264 [info]: kb/s:76.4
encoded 30 frames, 28.65 fps, 80.04 kb/s


D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\eac3to.exe" "c:\dvb\smartdvb\records\jsc sports +220090829-14
_08_19.ts" 2: stdout.wav  -down2   | "D:\My DVB\NEW\HDConvertToX_1.8.332.2935\ap
plications\neroaacenc.exe" -if - -br 128000 -ignorelength -of "D:\My DVB\NEW\HDC
onvertToX_1.8.332.2935\job0\hdencodertox-pid2.mp4"
*************************************************************
*                                                           *
*  Nero AAC Encoder                                         *
*  Copyright 2008 Nero AG                                   *
*  All Rights Reserved Worldwide                            *
*                                                           *
*  Package build date: Sep 17 2008                          *
*  Package version:    1.3.3.0                              *
*                                                           *
*  See -help for a complete list of available parameters.   *
*                                                           *
*************************************************************

Processed 51 seconds...

D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\x264.exe" --pass 1 --bitrate 1515  --keyint 250 --bframes 4 -
-mixed-refs --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --vbv-bu
fsize 14000 --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-adapt 2 --no-ch
roma-me --8x8dct --aud --aq-strength 1  --sar 1:1  --output "D:\My DVB\NEW\HDCon
vertToX_1.8.332.2935\job0\hdconverttox_jsc sports +220090829-14_08_19.h264" "D:\
My DVB\NEW\HDConvertToX_1.8.332.2935\job0\hdconverttox_jsc sports +220090829-14_
08_19.avs"
avis [info]: 640x464 @ 25.00 fps (1296 frames)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64
x264 [info]: cabac=1 ref=4 deblock=1:-1:-1 analyse=0x3:0x113 me=umh subme=9 psy_
rd=1.0:0.0 mixed_ref=1 me_range=16 chroma_me=0 trellis=0 8x8dct=1 cqm=0 deadzone
=21,11 chroma_qp_offset=-2 threads=1 thread_queue=1 nr=0 decimate=1 mbaff=0 bfra
mes=4 b_pyramid=0 b_adapt=2 b_bias=0 direct=3 wpredb=1 keyint=250 keyint_min=25
scenecut=40 rc=cbr bitrate=1515 ratetol=1.0 qcomp=0.60 qpmin=10 qpmax=51 qpstep=
4 vbv_maxrate=25000 vbv_bufsize=14000 ip_ratio=1.40 pb_ratio=1.30 aq=1:1.00
x264 [info]: profile High, level 3.2
x264 [info]: encoded 1296 frames, 7.09 fps, 1534.33 kb/s
x264 [info]: slice I:6     Avg QP:20.87  size: 33795  PSNR Mean Y:42.12 U:45.27
V:47.09 Avg:43.08 Global:42.76
x264 [info]: slice P:499   Avg QP:21.82  size: 13105  PSNR Mean Y:39.71 U:42.80
V:44.57 Avg:40.66 Global:40.52
x264 [info]: slice B:791   Avg QP:25.57  size:  4035  PSNR Mean Y:38.66 U:42.48
V:44.47 Avg:39.73 Global:39.63
x264 [info]: consecutive B-frames:  2.9% 22.2% 71.9%  3.1%  0.0%
x264 [info]: mb I  I16..4:  3.8% 73.7% 22.5%
x264 [info]: mb P  I16..4:  0.7%  3.8%  1.1%  P16..4: 50.2% 21.4% 16.5%  0.0%  0
.0%    skip: 6.2%
x264 [info]: mb B  I16..4:  0.0%  0.2%  0.1%  B16..8: 42.0%  2.5%  4.6%  direct:
 7.9%  skip:42.8%  L0:26.5% L1:57.0% BI:16.5%
x264 [info]: final ratefactor: 18.87
x264 [info]: 8x8 transform  intra:68.2%  inter:49.0%
x264 [info]: direct mvs  spatial:99.4%  temporal:0.6%
x264 [info]: coded y,uvDC,uvAC intra:81.9% 83.4% 57.0% inter:27.0% 25.8% 5.1%
x264 [info]: ref P L0  83.8%  8.9%  4.8%  2.6%
x264 [info]: ref B L0  94.1%  4.1%  1.8%
x264 [info]: PSNR Mean Y:39.078 U:42.617 V:44.518 Avg:40.105 Global:39.959 kb/s:
1532.99
encoded 1296 frames, 7.09 fps, 1534.33 kb/s


D:\My DVB\NEW\HDConvertToX_1.8.332.2935\job0>"D:\My DVB\NEW\HDConvertToX_1.8.332
.2935\applications\x264.exe" --pass 2 --bitrate 1515  --keyint 250 --bframes 4 -
-mixed-refs --trellis 0 --ref 4 --deblock -1,-1 --subme 9 --direct auto --vbv-bu
fsize 14000 --vbv-maxrate 25000 --me umh --no-ssim --weightb --b-adapt 2 --no-ch
roma-me --8x8dct --aud --aq-strength 1  --sar 1:1  --output "D:\My DVB\NEW\HDCon
vertToX_1.8.332.2935\job0\hdconverttox_jsc sports +220090829-14_08_19.h264" "D:\
My DVB\NEW\HDConvertToX_1.8.332.2935\job0\hdconverttox_jsc sports +220090829-14_
08_19.avs"
Any suggestion ?
Frozen-Figo is offline   Reply With Quote
Old 29th August 2009, 15:34   #1890  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
Quote:
Originally Posted by flebber View Post
I have changed files I am trying to encode, but this time I cannot encode audio at which point encoding fails.
Could you edit your posts to make the report files txt attachments? Including them in CODE tags kinda ruins the page.

That being said, can you describe the error that is being thrown? If you want to run the batch in "verbose mode", open up a command prompt, navigate to the directory of your job (eg. "whatever/HDConvertToX/job1") and run queue.bat from there. This will keep the window open afterwards so that you can read any results and post them here.
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 15:35   #1891  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
Quote:
Originally Posted by Frozen-Figo View Post
I have a strange problem, after some using of HDC, application always stuck at same point during encoding, so I need to extract rar file again.
Where is it getting stuck, and what rar are you talking about extracting again?
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 15:40   #1892  |  Link
flebber
Practising Schemer
 
Join Date: Feb 2008
Location: Newcastle, Australia
Posts: 791
Quote:
Originally Posted by rickatnight11 View Post
Could you edit your posts to make the report files txt attachments? Including them in CODE tags kinda ruins the page.

That being said, can you describe the error that is being thrown? If you want to run the batch in "verbose mode", open up a command prompt, navigate to the directory of your job (eg. "whatever/HDConvertToX/job1") and run queue.bat from there. This will keep the window open afterwards so that you can read any results and post them here.
You can't attach them they then sit there waiting approval. After audio encoding fails then x264 starts and fails. So it seems an error originating from audio encode.
flebber is offline   Reply With Quote
Old 29th August 2009, 15:44   #1893  |  Link
rickatnight11
Registered User
 
Join Date: Jul 2009
Posts: 39
Quote:
Originally Posted by flebber View Post
You can't attach them they then sit there waiting approval. After audio encoding fails then x264 starts and fails. So it seems an error originating from audio encode.
That's strange. I haven't had any issue attaching txt files or images. Oh well.

Actually, the audio encode and video code have nothing to do with each other until the final command which muxes them together. It sounds like the batch is having an issue communicating with the source. Either the source is messed up (not likely) or the parameters in the batch are a bit screwy (more likely.) I'll look through your batch more carefully, but I'm not very knowledgeable about the actual encoding parameters. You'll probably need one of the experts to diagnose this one for you.

EDIT: Something's awry with your audio and subtitle detection in the first report file. Your's looks like this:
Code:
Full Audio List-> (*** mean selected)
NONE
*** 80: ??? (AC3 2ch, 0xBD 0x80) [0]

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
??? 0 (0xBD 0x20) [0]

-> End Full Subtitle List
...while mine looked like this:
Code:
Full Audio List-> (*** mean selected)
NONE
*** 2: ac3, english, 2.0 channels, 192kbps, 48khz, dialnorm: -27db

-> End Full Audio List

Full Subtitle List-> (*** mean selected)
*** NONE
3: subtitle (pgs), japanese
*** 4: subtitle (pgs), english
5: subtitle (pgs), french
6: subtitle (pgs), italian
7: subtitle (pgs), dutch
8: subtitle (pgs), spanish
9: subtitle (pgs), portuguese

-> End Full Subtitle List
I don't know what's up with your second batch. Make sure you're running the latest version of HDConvertToX, but maybe one of the prerequisite programs is installed incorrectly. Hope this helps any experts diagnose your issue.

Last edited by rickatnight11; 29th August 2009 at 15:52.
rickatnight11 is offline   Reply With Quote
Old 29th August 2009, 16:08   #1894  |  Link
feanor12
Registered User
 
Join Date: Apr 2009
Location: Slovenia
Posts: 25
If you don't want command prompt to close after (unsuccesfull) encoding I suggest to just write "pause" in last line. ツ


Like this...


Code:
"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" "d:\  ....
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 1....
"C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264....
"C:\Program Files (x86)\hdconvert\applications\x264.exe" --pass 2....
"C:\Program Files (x86)\hdconvert\job0\hdconverttox_00004.h264" "C:\....
"C:\Program Files (x86)\hdconvert\applications\eac3to.exe" 1:....
"C:\Program Files (x86)\hdconvert\applications\mp4box.exe"....

color 0a
pause
Command "color 0a" is just to colorize text in console in green when all actions are finished...
(that way you know when all actions are finished) ツ

Last edited by feanor12; 29th August 2009 at 21:44.
feanor12 is offline   Reply With Quote
Old 29th August 2009, 21:51   #1895  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Quote:
Originally Posted by rickatnight11 View Post
The second to last line (that runs eac3to.exe) from your original batch is supposed to, but you'll notice that something is wrong with it: there is no source file, only the destination. For whatever reason, HDConvertToX isn't generating that line correctly.
Any idea what the correct syntax should be?

I would think maybe the ac3 file? There's also an MBTREE file, but I've not idea what that is for.
whipdancer is offline   Reply With Quote
Old 29th August 2009, 22:19   #1896  |  Link
Crono141
Registered User
 
Join Date: Jun 2007
Posts: 150
Whipdancer, just so you know, neither PS3 nor Xbox 360 support AC3 audio inside the MP4 container, unless something has changed very recently that I'm not aware of.
Crono141 is offline   Reply With Quote
Old 29th August 2009, 22:22   #1897  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Quote:
Originally Posted by Crono141 View Post
Whipdancer, just so you know, neither PS3 nor Xbox 360 support AC3 audio inside the MP4 container, unless something has changed very recently that I'm not aware of.
I'm aware.

But, I'm going to do some testing with different media servers and I want to test it both with AC3 and AAC-LC.
whipdancer is offline   Reply With Quote
Old 29th August 2009, 22:40   #1898  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Chapters.txt

Ok, so I think I found the syntax for it. Let's see if this works.

Basically I modified the 4th command in the bat file, adding the original m2ts file so that it reads something like...

eac3to orignal.m2ts 1: chapters.txt

It created a chapters.txt file for me, so i'm going re-run the final command in the batch file and see how that goes.
whipdancer is offline   Reply With Quote
Old 29th August 2009, 22:57   #1899  |  Link
whipdancer
Registered User
 
Join Date: Jul 2009
Posts: 104
Success, sort of...

Ok, that worked.

I've got a 6.88GB mp4 file.

However, I get no sound. I'm going to dig around in this thread some more, but if anyone has any tips on what I should check - please pass them along.

Thanks for all the help! So close to getting this working smoothly.

Let me clarify - I did the sound as AC3 (not AAC).

Last edited by whipdancer; 29th August 2009 at 23:03. Reason: clarify sound encoding
whipdancer is offline   Reply With Quote
Old 30th August 2009, 00:20   #1900  |  Link
Adub
Fighting spam with a fish
 
Adub's Avatar
 
Join Date: Sep 2005
Posts: 2,685
AC3 in the mp4 container is a relatively new standard. If you are having troubles playing it, either update your player to the newest version or just use AAC.
__________________
FAQs:Bond's AVC/H.264 FAQ
Site:Adubvideo
Adub is offline   Reply With Quote
Reply

Tags
bluray, hdc, hdconverttox, m2ts, network media tank, playstation, x264 gui

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:06.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2017, vBulletin Solutions Inc.