I messed around with 3dlut for a bit since I own an i1Display2 LT and calibrated my plasma with colorHCFR, but since my meter is not the most accurate and the values/readings can vary a bit, I figured the benefit will not be that worthwhile in my case. The main reason I wanted to use it was for gamma boost, since my display has no gamma adjustment options and with yCMS I could boost the gamma closer to 2.22 from my sets 1.87
So basically with the new changes we only need to setup an hd 3dlut file and that will handle both the SD and HD conversions? For reference this is what my hd video levels config file looks like:
Code:
# Example input file for yCMS v1.0 and up
#
# Settings for creating a 3DLUT file for watching the following Video formats:
# Blu-ray, HD DVD, ATSC HD Broadcast, DVB HD Broadcast
# without any Display correction
# Includes YCbCr->RGB conversion using Video Levels (Black: 16 and White: 235)
# Set input format
Input_Format HD YCbCr 8
# Set output format
Output_Format HD RGB_Video 16
# Gamut correction
Gamut_Measurements 2
20.027979 10.081485 0.193883
14.474010 29.748291 4.547331
8.679354 3.789106 45.662949
46.452229 48.580326 53.924377
# Grayscale correction
Grayscale_Measurements
20 2 3.462944 3.599591 4.022943
30 2 7.876838 8.235306 9.060005
40 2 13.712026 14.348957 15.907791
50 2 20.936159 22.056358 24.313534
60 2 30.698059 32.212700 35.946526
70 2 41.455574 43.527546 47.894981
80 2 52.848282 55.227596 61.580605
90 2 66.838257 70.423340 77.381279
100 2 80.136276 83.712715 92.825027
# Gamma correction Gamma_Curve 0.0 2.22 (has the most black crush 1.0 curve has almost no black crush)
Gamma_Curve 0.0 2.22