[B4tm4n]

Originally Posted by kurt

great!

does the readme contain a changelog? I don't speak russian

Google translation.

Translation: Russian » English
How to use myukserom from the command line:



We need to create a file with the extension. Meta. This file lists the files you want to smyuksit in TS.

The first line of meta file can be specified additional parameters that apply to all tracks.

In this case the line should begin with the words MUXOPT.





The following line indicates a list of tracks and their parameters.



The format is as follows:

<Code Name "," title "," More options>

More options list separated by commas. For each parameter indicates the name and value.

Example META file:



V_MPEG4/ISO/AVC, D: \ media \ test \ stream.h264, fps = 25

A_AC3, D: \ media \ test \ stream.ac3, timeshift =- 10000ms



In this example, occurs myuksing one way audio format AC3 and one videodorogi format H264.





Additional parameters of audio and video tracks:



fps - to videodorozhek and tracks with sabtitrami can clearly define the importance fps (see example above). If fps is not specified, he nachityvaetsya of flux.





level - allows you to overwrite the field level in the flow of H264. For example, you can change the profile High@5.1 to High@4.1.

Note that only updates the title. H264 flow can not meet the requirements

a lower level.



insertSEI - parameter is used only for the video H.264. When activated, it prosihodit the following: if the original video does not contain

Information SEI picture timing and SEI buffering period, then the info is added to the stream. This option is recommended

for better compatibility with the device Sony Playstation 3.



contSPS - parameter is used only for the video H.264. When you switch the setting, if the original video contains no cyclical repetitive

elements SPS / PPS (with imports from MKV it can be recorded only once at the beginning of the file), the SPS / PPS will be further inserted into a stream

before each key personnel. We recommend that you always include this option.

Note: For x264 flows videopleyer Dune HD can not decode re-SPS component, perhaps this is an error in the current firmware player.



delPulldown - for videodorozhek. Harvesting of the track tag pulldown. Attention! When you switch the setting delPulldown usually require input

new value fps, different values than in the stream. For example, if the flow fps 29.97, after the inclusion delPulldown require

put fps = 23.976.



timeshift - For audio tracks, and tracks with sabtitrami supported setting timeshift, may be more or less than zero.

Value for timeshift set in milliseconds (at the end should be ms) or in seconds (at the end of the letter s). This option

allows audio track in time to move forward (positive value) or backward.



down-to-dts - available only to track DTS-HD. Makes conversion DTS-HD in the standard DTS.

down-to-ac3 - is only available for tracks TRUE-HD c AC3 inside the nucleus (usually written on the Blu-ray discs).



track - starting with version 0.9.96 an opportunity to refer to the track behind other containers. In this case, you must indicate

track number inside the container.

mplsFile - a reference to the MPLS file, which the media file is the current track. This information allows a more accurate

handle joints files in the performance of the operation (append). The option is only available for tracks that are

inside M2TS files. As a value indicates the number MPLS file. For example: mplsFile = 00048. The file is searched on

Media file folders in subdirectories. / .. / PLAYLIST and. / .. / BACKUP / PLAYLIST.

When you combine a large number of files with Blu-ray Disc (10 and over), recommended that

option. If you do not enable this option and the Blu-ray disc used playlist with connection_condition = 5, at every junction of

will accumulate desync audio / video sabtitrov about 17ms (from 0 to the length of the audio frame the current track).

This option is automatically filled in the GUI when you open a file MPLS.



Settings for text sabtitrov SRT:

video-width - the width of the video in pixels

video-height - the height of the video in pixels

fps - fps video

bottom-offset - depart from the lower edge while displaying text.

font-name - the name of the font used in quotes

font-color - font color, for example, 0x00FFFFFF. Color can be introduced in hexadecimal or decimal form.

font-size - the font size

font-italic - displaying text, with an inclination

font-bold - bold display text

font-underline - underlined text

font-strikeout - crossed the text



In sabtitrah SRT also supported by the following text tags, the syntax and parameters which coincide with HTML:

<b>, <i>, <u>, <strike>, <font>. The font size default 3 (size of font-size dpi).

For example:

<b> <font size=5 color="deepskyblue" name="Arial"> <u> Test </ u> <font size= 4 color="#806040"> colored </ font> text </ font> < / b>





Supported containers:

- TS/M2TS/MTS

- EVO / VOB / MPG

- MKV

- MPLS (Blu-ray media play list file)



For a track number, run: tsMuxer <container file name>.



To start myuksera need to open the windows terminal, far or other file manager and type:

tsMuxer <meta name of the file> <TS file name>



Names of codecs in the meta file:

V_MPEG4/ISO/AVC - H264

V_MS/VFW/WVC1 - VC1

V_MPEG-2 - MPEG2



A_AC3 - DD (AC3) / DD (E-AC3) / True HD (True HD only tracks with AC3 core inside).

A_AAC - AAC

A_DTS - DTS / DTS-HD

A_MP3 - MPEG audio layer 1/2/3

A_LPCM - raw pcm data or PCM WAVE file



S_HDMV / PGS - sabtitry format Presentation Graphic Stream.

S_TEXT/UTF8 - sabtitry format SRT. The text file should be in unicode. Any formats: UTF-8, UTF-16 (little-endoan,

big-endian), UTF-32 (little-endian, big-endian).





More options myuksera in line MUXOPT.



The parameters of this group vliyat the entire flow as a whole, rather than on a separate track. Options are listed through the gap.





- pcr-on-video-pid - did not provide a separate PID for PCR, and use an existing video PID.

- new-audio-pes - use bytes 0xfd instead 0xbd to track AC3, True-HD, DTS and DTS-HD. This is in line with standard Blu-ray.

-vbr - to use variable bitrate

- minbitrate = xxxx - sets the lower limit vbr bitrate. If the stream is a smaller number of bytes will be inserted NULL packets

for avoiding flow to the correct lane.

- maxbitrate = xxxx - the upper limit vbr bitrate.

- cbr - myuksinga regime with a fixed bitrate. Options - vbr and - cbr should not be used together.

- vbv-len - the length of the virtual buffer in milliseconds. The default value is 500. Typically, this option is used in conjunction with - cbr.

The parameter is similar to the value of vbv-buffer-size coder in the x264, but is set not in kilobitah, and in milliseconds (with constant bitrate

they can be counted at each other). If you are self-encoded file in the x264 in constant bitrate, for more

smooth broadcasting file in the network are encouraged to make the same (or less) this setting than in the x264. When the virtual overflow

buffer in the log will withdraw the relevant error.

- bitrate = xxxx - bitrate for the regime myuksinga fixed bitrate.

Values - maxbitrate, - minbitrate and - bitrate indicated in kilobitah per second. You can not use the serial number separator

between the whole and fractional part of a character point. For example: - maxbitrate = 19423.432

- no-asyncio - not to create a separate thread to record output files. The inclusion of this regime is also repeals the flag FILE_FLAG_NO_BUFFERING.

This somewhat reduces the speed record, but allows you to see the amount of output file as you work.

- auto-chapters = nn - insert a chapter every nn minutes. Only in the blu-ray muxing.

- custom-chapters = <line parameters> - insert a chapter in the field. Only in the blu-ray muxing.

A string of parameters is as follows: hh: mm: ss; hh: mm: ss, etc. A semicolon listed timestamps, which

must insert a new chapter. The line should not contain spaces.

- demux - in this mode selected audio and video tracks are stored as separate files. The processing paths are superimposed

All selected effects, such as change of level for h.264. When demux certain types of tracks is always podverayutsya changes in the

stored in a file:

- Subtitles in a Presentation graphic stream is converted into a format sup

- PCM audio are saved as WAV files. Also automatically splitting into several files,

If the size of WAV file exceed 4Gb.

- cut-start - Trim the beginning of the file. Value should be completed "ms" (the number of milliseconds), "s" (seconds) or "min" (the number of minutes)

- cut-end - Trim the end of the file. Value should be completed "ms" (the number of milliseconds), "s" (seconds) or "min" (the number of minutes)

- split-duration - cut off in time. The time specified in seconds. The length of each part will always be a little less than imposed values

because point gap file only on key frames (or on the Limits of audiofreymov if there is no video).

It is controlled that the next valid point gap should not exceed a specified value.

- split-size - to cut output file size. The length of each part will always be a little less than imposed values.

Value should be completed in one of the following prefixes:

Kb - meaning specified in kilobytes (1000 bytes).

Kib - the value specified in units of 2 ^ 10 bytes.

mb - the value specified in megabytes (1000000 bytes).

mib - the value specified in units of 2 ^ 20 bytes.

gb - the value stated in gigabytes (1000000000 bytes).

gib - the value specified in units of 2 ^ 30 bytes.







When tsMuxer does not use external filters (codecs).