Jdobbs: I rarely have an issue but i've seen the following too many times now for it to be random. The error is "Failed to build structure" and is limited to
DTS-Express enabled discs in combo with DGdecNV, if encode the SAME project without changing ANY variable except switching to LAVF the project rebuilds just fine
Code:
[12/14/14] BD Rebuilder v0.50.01
[14:43:36] Source: UNDERWORLD_RISE_OF_THE_LYCANS
- Input BD size: 39,49 GB
- Approximate total content: [02:56:17.757]
- Target BD size: 22,95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Output folder: C:\Blu-Ray Rebuilds\BDRB\
- Decoding/Frame serving: DGDecNV [2-way]
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[14:43:37] PHASE ONE, Encoding
- [14:43:37] Processing: VID_00260 (1 of 13)
- [14:43:37] Extracting A/V streams [VID_00260]
- [14:43:44] Reencoding video [VID_00260]
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23,976fps, 1.440 frames
- Bitrate: 8.244 Kbs
- [14:43:44] Reencoding: VID_00260, Pass 1 of 1
- [14:44:05] Video Encode complete
- [14:44:05] Processing audio tracks
- [14:44:05] Multiplexing M2TS
- [14:44:09] Processing: VID_00262 (2 of 13)
- [14:44:09] Extracting A/V streams [VID_00262]
- [14:58:08] Reencoding video [VID_00262]
- [14:58:08] Reencoding secondary video [TRK_02]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 133.033 frames
- Bitrate: 14.554 Kbs
- [15:12:32] Reencoding: VID_00262, Pass 1 of 1
- [15:58:02] Video Encode complete
- [15:58:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4356 (eng): Keeping original audio
- Track 6656 (eng): Keeping original audio
- [15:58:02] Multiplexing M2TS
- Error in attempt to multiplex: MUX_00262.meta
- Can't open file: C:\TEMP\WORKFILES\VID_00262_2.AVS.264
[15:58:07] - Failed to build structure, aborted
All files exist afaik that are needed.
Below is my ini config. Again: if i swap the encoding variable from DGdecNV to LAVF, the entire thing completes just fine
Code:
[Options]
#video settings
MODE=0
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=1
SD_CONVERT=0
COLOR_BOOST=0
RESIZE_1080=0
DEINTERLACE=0
OPEN_GOP=0
MOVIE_ONLY_LOOP=1
USE_FILTERS=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=1
SD_TO_1080=0
CONVERT_WIDE=0
MOVIEONLY_TYPE=0
ALTCRF=20
ALT_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=0
WIDE_PERCENT=40
WIDE_OFFSET=.85
RESIZE_1440=0
RESIZE_720=0
OUTPUT_3D=1
IGNORE_3D=0
NEROAAC=0
DGDECNV=1
USE_LAVF=0
#audio settings
AUDIO_TO_KEEP=dut;eng;nld;und;
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=0
FULL_AVCHD=0
#subtitle settings
SUBS_TO_KEEP=dut;eng;nld;und;
#output settings
REMOVE_WORKFILES=1
REMOVE_OUTPUT=1
REMOVE_IMPORT=1
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23450
PRIORITY_CLASS=1
TARGET_SIZE=23500
AUTO_BURN=2
QUICK_EXTRAS=0
#General Settings
ENABLE_TEST=1
ENABLE_BLANKING=0
BLANK_THRESHOLD=60
MULTIPROCESS=1
MINIMIZE_TO_TRAY=1
SHUTDOWN_REBOOT=1
IMPORT_FOLDER=C:\TEMP
VERBOSE_STATUS=1
BDMV_CERT_ONLY=1
AUTO_BLANK=0
UNMASK_CHAPTER=1
VERSION=0.50.0.1
COMPLETION_BEEP=1
BEEP_SOUNDFILE=C:\Program Files (x86)\ImgBurn\Sounds\Success.wav
SD_PROGRESSIVE=1
MKV_CHAPTERS=1
SUPTITLE=0
OUTPUT_SBS=0
MENU_BACKGROUND=C:\Program Files (x86)\BD_Rebuilder\misc\menuback.jpg
IMPORT_THRESHOLD=15
QUICK_PLAY_THRESHOLD=10
MENU_AUTO_BACKGROUND=1
MENU_PLAY_SEQUENTIAL=1
MENU_START_WITH_MENU=1
OUTPUT_FOLDER=C:\Blu-Ray Rebuilds\BDRB\
FRIMSOURCE=0
ENCODER=0
DGDECIM=0
DECODER=2
[Paths]
WORKING_PATH=C:\TEMP\LAVF\
SOURCE_PATH=Z:\BLU-RAY\DOUBLE LAYER\DTS-E\UNDERWORLD_RISE_OF_THE_LYCANS\
DGIndexNV=C:\Program Files (x86)\BD_Rebuilder\Tools\dgdecnv\DGIndexNV.exe
DGDecNV=C:\Program Files (x86)\BD_Rebuilder\Tools\dgdecnv\DGDecodeNV.dll
DirectShowMVCSource=C:\Program Files (x86)\BD_Rebuilder\Tools\MVCtoAVI.exe\DirectShowMVCSource.dll
NeroAACPath=C:\Program Files (x86)\BD_Rebuilder\Tools\neroaacenc1.5.1\win32\neroAacEnc.exe
Could perhaps the last 2 lines under "paths" be to blame? Those are the only 2 that are no longer in existence, though i don't see them referenced in the AVS script
Code:
[12/14/14] Checking System Settings
- BD-Rebuilder v0.50.01
- Windows Version: 6.1 [7601]
- Working Path Free Space: 1.127,15GB
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4504, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[12/14/14] Systems Settings Check complete
I do NOT have any codec packs other than ffdshow installed, and i do NOT have LAV filters installed
I have noticed that in the BDRB window the source path is not fully shown. It only shows: "Z:\Blu-ray\Double"