russo121
12th July 2005, 00:29
http://www.hdtvexpert.com/pages/reality.htm
I hope the experts here comment this :confused: Is it true?
"...First off, there is no 1080p HDTV transmission format. There is a 1080p/24 production format in wide use for prime time TV shows and some feature films. But these programs must be converted to 1080i/30 (that’s interlaced, not progressive scan) before airing on any terrestrial, satellite, or cable TV network.
What’s that, you say? Those 1080p/24 could be broadcast as a digital signal? That’s true, except that none of the consumer HDTV sets out there would support the non-standard horizontal scan rate required. And you sure wouldn’t want to watch 24Hz video for any length of time; the flicker would drive you crazy after a few seconds.
No, you’d need to have your TV refresh images at either a 2x (48Hz) or 3x (72Hz) frame rate, neither of which is supported by most HDTVs. If the HDTV has a computer (PC) input, that might work. But if you are receiving the signals off-air or using a DVI HDCP or HDMI connection, you’ll be outta luck..."
"...How about Blu-ray and HD-DVD? If either format is used to store and play back live HD content, it will have to be 1920x1080i (interlaced again) to be compatible with the bulk of consumer TVs. And any progressive-scan content will also have to be interlaced for viewing on the majority of HDTV sets.
Here’s why. To cut manufacturing costs, most HDTV sets run their horizontal scan at a constant 33.8 kHz, which is what’s needed for 1080i (or 540p). 1080p scans pictures twice as fast at 67.6 kHz. But most of today’s HDTVs don’t even support external 720p signal sources, which requires a 44.9 kHz higher scan rate..."
I hope the experts here comment this :confused: Is it true?
"...First off, there is no 1080p HDTV transmission format. There is a 1080p/24 production format in wide use for prime time TV shows and some feature films. But these programs must be converted to 1080i/30 (that’s interlaced, not progressive scan) before airing on any terrestrial, satellite, or cable TV network.
What’s that, you say? Those 1080p/24 could be broadcast as a digital signal? That’s true, except that none of the consumer HDTV sets out there would support the non-standard horizontal scan rate required. And you sure wouldn’t want to watch 24Hz video for any length of time; the flicker would drive you crazy after a few seconds.
No, you’d need to have your TV refresh images at either a 2x (48Hz) or 3x (72Hz) frame rate, neither of which is supported by most HDTVs. If the HDTV has a computer (PC) input, that might work. But if you are receiving the signals off-air or using a DVI HDCP or HDMI connection, you’ll be outta luck..."
"...How about Blu-ray and HD-DVD? If either format is used to store and play back live HD content, it will have to be 1920x1080i (interlaced again) to be compatible with the bulk of consumer TVs. And any progressive-scan content will also have to be interlaced for viewing on the majority of HDTV sets.
Here’s why. To cut manufacturing costs, most HDTV sets run their horizontal scan at a constant 33.8 kHz, which is what’s needed for 1080i (or 540p). 1080p scans pictures twice as fast at 67.6 kHz. But most of today’s HDTVs don’t even support external 720p signal sources, which requires a 44.9 kHz higher scan rate..."