Cwluc
17th April 2005, 05:00
I have in the past used a workaround for what I believe we found to be an issue with the way that CCE handles the opening of the HBO "TV snow". It was either low bitrate or just the method of trying to figure out how to encode the "jumbled squares" I do not recall its been awhile. I normally use 2.66/2.67 to do the majority of my rebuilds. I know that there are a few discs which have this intro and then when or if CCE locks up I revert back to 2.50. Now I have the Sex and the City - Season Six, Part 2 discs (all three) that will not complete with the older encoder, I have listed the rebuilder.txt from two attempts 2.67 and 2.50. I see that on the same disc (1) in phase 1 it takes a different amount of time, negligible but I wasn't sure if that meant anything, and from 2.67 to 2.50 it is hanging on different segments in phase 2. If there are any ideas on why they will not complete I would be ever so grateful. If there is any other information that might be helpful I can try and help. Thank you.
(2.67)
[23:47:14] One Click encoding activated...
-----------------
[23:47:15] Phase I, PREPARATION started.
- CCE SP ECLCCE encoder selected.
- VTS_01: 2,759,545 sectors.
-- Scanning and writing .D2V file
-- Processed 172,750 frames.
-- Building .AVS and .ECL files
- VTS_02: 111,463 sectors.
-- Scanning and writing .D2V file
-- Processed 9,152 frames.
-- Building .AVS and .ECL files
- VTS_03: 55,594 sectors.
-- Scanning and writing .D2V file
-- Processed 4,179 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.9%
- Overall Bitrate : 3,971Kbs
- Space for Video : 3,762,378KB
- HIGH/LOW/TYPICAL Bitrates: 4,112/500/3,971 Kbs
[23:56:55] Phase I, PREPARATION completed in 9 minutes.
[23:56:55] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
(2.50)
[12:39:24] One Click encoding activated...
-----------------
[12:39:25] Phase I, PREPARATION started.
- CCE SP v2.50 encoder selected.
- VTS_01: 2,759,545 sectors.
-- Scanning and writing .D2V file
-- Processed 172,750 frames.
-- Building .AVS and .ECL files
- VTS_02: 111,463 sectors.
-- Scanning and writing .D2V file
-- Processed 9,152 frames.
-- Building .AVS and .ECL files
- VTS_03: 55,594 sectors.
-- Scanning and writing .D2V file
-- Processed 4,179 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.9%
- Overall Bitrate : 3,971Kbs
- Space for Video : 3,762,378KB
- HIGH/LOW/TYPICAL Bitrates: 4,112/500/3,971 Kbs
[12:52:21] Phase I, PREPARATION completed in 13 minutes.
[12:52:21] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
(2.67)
[23:47:14] One Click encoding activated...
-----------------
[23:47:15] Phase I, PREPARATION started.
- CCE SP ECLCCE encoder selected.
- VTS_01: 2,759,545 sectors.
-- Scanning and writing .D2V file
-- Processed 172,750 frames.
-- Building .AVS and .ECL files
- VTS_02: 111,463 sectors.
-- Scanning and writing .D2V file
-- Processed 9,152 frames.
-- Building .AVS and .ECL files
- VTS_03: 55,594 sectors.
-- Scanning and writing .D2V file
-- Processed 4,179 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.9%
- Overall Bitrate : 3,971Kbs
- Space for Video : 3,762,378KB
- HIGH/LOW/TYPICAL Bitrates: 4,112/500/3,971 Kbs
[23:56:55] Phase I, PREPARATION completed in 9 minutes.
[23:56:55] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
(2.50)
[12:39:24] One Click encoding activated...
-----------------
[12:39:25] Phase I, PREPARATION started.
- CCE SP v2.50 encoder selected.
- VTS_01: 2,759,545 sectors.
-- Scanning and writing .D2V file
-- Processed 172,750 frames.
-- Building .AVS and .ECL files
- VTS_02: 111,463 sectors.
-- Scanning and writing .D2V file
-- Processed 9,152 frames.
-- Building .AVS and .ECL files
- VTS_03: 55,594 sectors.
-- Scanning and writing .D2V file
-- Processed 4,179 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 71.9%
- Overall Bitrate : 3,971Kbs
- Space for Video : 3,762,378KB
- HIGH/LOW/TYPICAL Bitrates: 4,112/500/3,971 Kbs
[12:52:21] Phase I, PREPARATION completed in 13 minutes.
[12:52:21] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10