Problems with DVDDecrypter 3.1.4.0

[neofit]

I installed v3.1.4.0, and my DVD+RW disks are not recognized anymore. I am reading/ripping them on a Memorex DVD-MAXX 1648 AJ player on my PC. These DVD+RWs are recorded on a Philips DVDR 985 standalone recorder. With v3.1.3.0 and below I have no problems ripping them, just went back to 3.1.3.0 and all is OK. 3.1.4.0 reads the label OK (it shows PHILIPS_DVD_something), then the right panes are left empty, and 'unformatted disk' appears on the status bar.

Installing and uninstalling 3.1.4.0 does not change anything, nor does it break anything else in my system (thank god :) ) : the same DVD+RW are still readable with no problems with SmartRipper, before 3.1.4.0, while it is installed and after de-installation. And as I said, going back to 3.1.3.0 makes the disks recognizable and rippable again.

Anything I can do to help pinpoint the problem (like extra logging/debugging, etc.)?

[LIGHTNING UK!]

Oh geez....I wish there would just a standard way of these things working! As far as Im aware, DVD+RW media had to be formatted before it could be used.
Your disc is reporting itself as being unformatted - I guess thats just the way standalones work. This was an additional check I put into 3.1.4.0. Can you please copy + paste the entire contents of the little information box on the right hand side in 'IFO Read' mode.
I'll use to that make some sort of work around.

[neofit]

Originally posted by LIGHTNING UK!
Oh geez....I wish there would just a standard way of these things working! As far as Im aware, DVD+RW media had to be formatted before it could be used.
I don't know how PC DVD+RW/R recorders work, but with my standalone I just unwrap it, put it in, and press record.

Your disc is reporting itself as being unformatted - I guess thats just the way standalones work. This was an additional check I put into 3.1.4.0. Can you please copy + paste the entire contents of the little information box on the right hand side in 'IFO Read' mode.
I'll use to that make some sort of work around.

V 3.1.4.0:

Device Information:
Current Profile: DVD-ROM

Disc Information:
Status: Complete
Erasable: No
Formatted: No

Physical Format Information:
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: 10.08Mbps
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track

-------------------
v 3.1.3.0:
Disc Information:
Empty: No
Erasable: No
Sessions: 1
Sectors: 2_293_648
Size: 4_697_391_104 bytes
Time: 509:43:73 (MM:SS:FF)

Physical Format Information:
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: 10.08Mbps
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track

-------------------

Same disk was used for both tests.

I can send you one of my DVD+RW recorded on that standalone through snail mail if you wish, it should only take a few days to cross the Channel.