why, everytime dvd2svcd missing Encoded_Audio_1.mp2 file?

[ccc_p]

Hi,all!

why?!, every time dvd2svcd missing Encoded_Audio_1.mp2 file, Extracted_Audio_1.mpa its there, but "BeSweetv1.3b7" cant encoded
to Mp2-file and everytime still missing this action,why?

PS. i do not use now any DVDrip, only pure mpeg2 files from my Nokia
DVB-Sat-reciever and IFO-file from original DVD-disk!

Hier is the dvd2svcd log:
--------------------------------------------------------
- 03.04.2002 03:59:55
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.7 build 4
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 03.04.2002 04:00:00
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -IA=1 -CS=2 -YR=1 -EXIT -OF=[C:\Programme\DVD2SVCD\Movie\DVD2AVI_Project_file] -IF=[D:\VTS_01_1.vob]
Framerate: 25000
DVD2AVI processing done.

--------------------------------------------------------
- 03.04.2002 04:00:06
- AUDIO Extraction
--------------------------------------------------------
Found MPA stream id: 0xC0
Filename: C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa
Audio1 delay: -40 ms
Audio extraction finished.

--------------------------------------------------------
- 03.04.2002 04:00:16
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )
Audio conversion of C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa finished.

Audio conversion finished.



Thanks for any reply!

cccp

[ux-3]

Perhaps the selected trach is this Dolby dtts or what its called. Check under Conversion if the track selected is regular or 6.1
Find the regular track, and select that.

perhaps this helps

[DSPguru]

where's the encoded_audio_1 logfile ?

btw, v1.3b is an upgrate to BeSweet v1.2, so most of the dlls are simply missing.

[ccc_p]

i dont know what happend, but everytime "encoded_audio_1 LOGFILE" is empty!!!
and now i have deleted all dll`s/files of BeSweet Folder and already upgrated to "BeSweet v1.2",but still missing the Encoded_Audio_1.mp2!

What can it be?!?!

to ux-3!

my selected track is AC3 6-Ch, but i can also edit IFO_file with
Ifo-Editor09 to any others, example to mpeg1-duel Chanal, but
without success,still NO "ENCODED_AUDIO_1.Mp2"!!! and Log-file
is also empty!


RGRDS
cccp

[DSPguru]

open dos window, run :
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )

and tell me what happens.

[ccc_p]

DSPguru, i have winXP-pro and i no use DOS modus,also do not know
how can i kopie this:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )

to Windows-Dos using STRG+C then STRG+V
or I must write all separatly?

cccp

[DSPguru]

copy this command to notepad and save as test.bat

"start"->"run..." and write command (or cmd) and press enter.

on the dos window, run this batchfile (simply write "test").

[ccc_p]

I have made hopefully,but dont know corectly or not what you need?

After Test.bat running in Windows-dos modus:

C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )
BeSweet 1.2 by DSPguru.
--------------------------

OK? or not?

cccp

[DSPguru]

that's all you got ?

[ccc_p]

no, in Movie-folder was log_file for Audio:

Error 57: Error opening "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa".
Quiting...
[00:00:00:000] Conversion Completed !
Logging ends : 04/03/02 , 17:18:52.


cccp

[DSPguru]

and the mpa is there ?

[ccc_p]

not always, not now!
but if Mpa is there, will be nothing happend

cccp

[DSPguru]

sorry, but i could only help you with BeSweet...
if there's no inputfile for BeSweet, it can't work :(.

Dg.

[ccc_p]

but if Mpa is there, will be nothing happend

cccp

[DSPguru]

whenever you have the mpa, run the commandline, and tell me what happens.

[gerti67]

Hi ccc_p,

I would strongly suggest you try a complete re-install of DVD2SVCD and make sure to install the 1.0.7 Build 1 first as 1.0.7 Build 4 is only an update.

Greetings,
Gerti

[ccc_p]

OK, now i get other Movie folder which was with Extracted_audio_1.mpa
then i run your taest.bat file and now can you see whats happend:

C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )
BeSweet 1.2 by DSPguru.
--------------------------
using mpglib.dll
C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD
SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_a
dio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g
max -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )
BeSweet v1.2 by DSPguru.
--------------------------
Using mpglib.dll v2.00 by Michael Hipp (mh@mpg123.de).
Using ssrc.dll v1.28 by Naoki Shibata (shibatch@geocities.co.jp).
Using MP2enc.dll v1.129 (8/3/2002), Engine 1.129 <http://www.cdex.n3.net>.

[00:01:04:064] | Maximum Gain Found : 0.0dB
C:\>

Thats all, what do you think?

cccp

[DSPguru]

try this commandline :
C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -d -40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )

[ccc_p]

ok,i hve to run this and
that is result:

C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2
SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_au
dio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -d
-40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )

Than I have get this Windows report:
------------------------------------
C:\Programme\DVD2SVCD\Movie\BeSweet.exe is no permissible Win32 application

cccp

[ccc_p]

i have reinstall DVD2SVCD1.07b4 and ones more reinstall Besweet1.2!
Now after runing your last commands-line, i get this answer:

C:\>test.bat

C:\>"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2
SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_au
dio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -d
-40 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m d )
BeSweet v1.3b7 by DSPguru.
--------------------------
Using mpglib.dll v2.00 by Michael Hipp (mh@mpg123.de).
Using ssrc.dll v1.28 by Naoki Shibata (shibatch@geocities.co.jp).
Using MP2enc.dll v1.12 (1/0/1999), Engine 1.12 <http://www.cdex.n3.net>.

[00:00:02:804] transcoding ...
----------------------------------------------------------------

in this case,Orig.Movie-movie was 2min 51sec
but transcoding was only 2sec of this movie and not clean-scrape!

the same was by movie,which was 1h.33min, after running your Last Test.bat was encoded to Mp2-file only 1min 3sec,also with scrape-sound


that all what i get!

and by the way, I can not understanding, why if i using DVD2SVCD
Audio stream, "Extracted_Audio_1.MPA" everytime was found, but after that, when programm trying to encode to MP2,Besweet1.2 immediately crashed!!! and in Movie-Folder "Extracted_Audio_1.MPA" will deleted constantly! Why?

RGRDS
cccp

[DSPguru]

BeSweet have known issues (http://forum.doom9.org/showthread.php?s=&threadid=15738) with mpa streams (mpglib.dll is buggy), but afaik, dvd2svcd should use madplay to decode the mpa to wav, and only then use BeSweet to encode the wav to mp2.

[DSPguru]

i played somewhat with the mpglib sources, and it might help a little.

ccc_p, please download BeSweet v1.3b8 from my webpage and report back.

[GreenDrazi]

Just a thought here (I defer my humble comments to the more knowledgeable DSPguru) -
What is the capture method if you are pulling it off the DVB receiver?

I’ve had problems with the audio conversion in DVD2SVCD when converting avi and mpeg files with odd (low) audio sampling rates (below 44100) or bit rates.
Do you have an audio editing program like Sound Forge or CoolEdit Pro on your computer that you can open the ripped .mpa audio file to see what it’s sampling or bit rate is?

So, is the capture device creating non-standard audio in the original mpeg file?

[ccc_p]

Hi,DSPguru!
Thanks very very much!
now is everything working OK!
Great job!

RGRDS
cccp

[DSPguru]

:D