Wierd Problems

[Darkedge]

Ok I am having problems getting this to work.
I can encode everything fine works great. When I burn with fireburner it burns great. I put the svcd in my ge1001p and it doesn;t load when it finally loads it says its a vcd1.1
If i do the encode and tell it not to make images and I burn with ulead it get skippy movie skips a couple of times per second. IF i rip dvd with dvdx it works great but takes liek 10 hours. I would like to use dvd2svcd as it only takes like 2-3 hours to rip. I know its not the media or anything liek that because i use the same media with the dvdx. I always use the highest rate of burn which is 8x could thi be my problem. any ideas would be great. Frewsh install of win98 Se amd 1600xp 512 megs of ddr ram soltek motherboard.

[da franksta]

please post your log file so we can have a look at it

[Darkedge]

Key found: E1C761A939
--------------------------------------------------------
- 2/6/02 6:21:28 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.6 build 4
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 2/6/02 6:21:31 PM
- Free on drive C: 23109.45 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- F:\VIDEO_TS\VTS_01_1.vob
- F:\VIDEO_TS\VTS_01_2.vob
- F:\VIDEO_TS\VTS_01_3.vob
- F:\VIDEO_TS\VTS_01_4.vob
- F:\VIDEO_TS\VTS_01_5.vob

Ripping: F:\VIDEO_TS\VTS_01_1.vob
Ripping: F:\VIDEO_TS\VTS_01_2.vob
Ripping: F:\VIDEO_TS\VTS_01_3.vob
Ripping: F:\VIDEO_TS\VTS_01_4.vob
Ripping: F:\VIDEO_TS\VTS_01_5.vob
Ripping finished. Speed: 6203

--------------------------------------------------------
- 2/6/02 6:32:55 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -IA=1 -CS=2 -YR=1 -EXIT -OF=[C:\Movie\DVD2AVI_Project_file] -IF=[C:\Movie\VTS_01_1.vob,C:\Movie\VTS_01_2.vob,C:\Movie\VTS_01_3.vob,C:\Movie\VTS_01_4.vob,C:\Movie\VTS_01_5.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 2/6/02 6:35:23 PM
- Free on drive C: 21010.77 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: C:\Movie\Extracted_audio_1.ac3
Audio1 delay: 0 ms
Audio extraction finished.

--------------------------------------------------------
- 2/6/02 6:40:08 PM
- Free on drive C: 20722.36 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: C:\Movie\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Movie\Extracted_audio_1.ac3" -output "C:\MOVIE\Encoded_audio_1.mp2" -logfile "C:\MOVIE\Encoded_audio_1.log" ) -azid( -L -3db -c normal ) -ota( -g max ) -2lame( -e -b 128 -m s )
Audio conversion of C:\Movie\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 2/6/02 6:54:08 PM
- Free on drive C: 20639.92 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Program Files\DVD2SVCD\DefaultTitlepicture.bmp
Converting: C:\Program Files\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 2/6/02 6:54:15 PM
- Free on drive C: 20638.92 mb
- Video Encoding
--------------------------------------------------------

Executing Cinema Craft Encoder.
DVD2SVCD no. frames: 129593
CCE no. frames: 129541
StreamSectors: 1665085576
AudioSectors: 87552052
VideoPAPO: 24436836
ScanOffsetBytes: 155449
SeqAligningBytes: 9879660
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 600.00
PureMPEGStream: 1543061570.53
Seconds: 5398.94
CDSize: 800.00
Cut point 795.00
Variable Settings:
Frames: 129541
Anti Noise Filter: 2
Passes: 3
Image Quality: 5
VAF file creation: On
Video Encoding Mode: One Pass VBR
Q. Factor: 5
Min. bitrate: 1900
Max. bitrate: 2250
Closing program
Video Encoding finished.

--------------------------------------------------------
- 2/6/02 7:51:50 PM
- Free on drive C: 19187.78 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "C:\Movie\CCE_Encoded_Video_NTSC.mpv" "C:\Movie\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
- 2/6/02 7:57:06 PM
- Free on drive C: 17768.55 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Movie\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 2/6/02 7:57:09 PM
- Free on drive C: 17768.47 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Movie\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 2/6/02 7:57:13 PM
- Free on drive C: 17768.41 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Movie\bbMPEG_Muxed_File.mpg"
Length of C:\Movie\bbMPEG_Muxed_File00.mpg
2795 Seconds
Offset in Seconds: 2797
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Movie\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 2/6/02 8:06:13 PM
- Free on drive C: 16233.06 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: C:\Movie\bbMPEG_Muxed_File00.mpg
2797.368 seconds C:\Movie\bbMPEG_Muxed_File00.mpg
Analyzing: C:\Movie\bbMPEG_Muxed_File01.mpg
2602.680 seconds C:\Movie\bbMPEG_Muxed_File01.mpg
Analyzing finished.

--------------------------------------------------------
- 2/6/02 8:07:15 PM
- Free on drive C: 16233.06 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 7

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --cue-file="C:\Movie\CD_Image_File_CD1.cue" --bin-file="C:\Movie\CD_Image_File_CD1.bin" "C:\Movie\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 2/6/02 8:09:22 PM
- Free on drive C: 15426.81 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --cue-file="C:\Movie\CD_Image_File_CD2.cue" --bin-file="C:\Movie\CD_Image_File_CD2.bin" "C:\Movie\VCDXBuild_Script_2.xml"
CD-Image creation finished.

--------------------------------------------------------
- 2/6/02 8:11:21 PM
- Free on drive C: 14676.02 mb
- SVCD Creation finished!
--------------------------------------------------------

[da franksta]

Fireburner has some burning corruptions issues, which you can see while watching the SVCD. I don't recomend it (Mozart)


could you try another burn proggie?
also it is recommended to burn 4x (see Q&A)

[Darkedge]

WEll i tried updating my aspi to latest using forceaspi then installed VCDEASY cause I have seen it recommended. I set it to burn at 4x using the driver from their driver table. I left cdi checked as I didn't know what that was. IT did not work. it taked forever to load then same vcd1.1 message. I am at a lose. I have also tried nero with same results only program that works is ulead dvd program. but movie is skippy. I don't understand it seem sI am the onyl one with this problem. THe ge1101p is a great player even checked around on the web and yahoo groups and no one else has this problem. by the way also had pbc enabled

[xrv1138]

does the svcd play fine using powerdvd/windvd on your pc ?
and i presume using dvdx you have created svcds which play fine n your standalone ?

[Darkedge]

Yes no matter what I use they play fine on my pc.
Standalone only works as follows: GE 1101P
If i encode with dvdx and burn with ulead works fine. If i encode with dvd2svcd and burn with ulead plays skippy. I have also tried encoding with dvd2svcd and burning wiht fireburner loads as a vcd1.1 and also used vcdeasy with segemtn there and the svcd folder and mpegav folder which is how ulead makes them and loads as a vcd1.1 Just as a side note I have the same problem with vcds except ulead wont work have to use adaptec vcd. Very wierd problem. its very confusing.
recap the only way so far I can get a dvd rip to work is
rip and encode with dvdx
burn with ulead
or rip with anythign encode with tmpgencode
burn with ulead.
THis is very annoying since tmpgencode and dvdx take 10+ hours to encode.
dvd2svcd takes 3 hours.

[Wh00pS]

try burning with CDRWIN at 4x...its by far the best bin & cue burner about.

[DDogg]

or try this

http://forum.doom9.org/showthread.php?s=&threadid=13853

By the way, what happens if you run smartripper? I am speaking of the process that happens when smartripper is trying to unlock the disk.
Does the windows that pops up stay there a long time or does it authenticate and go away quickly?