PDA

View Full Version : movies out of sync


chicagodog
2nd February 2002, 09:04
Hi,
I tried the new relase 1.0.6 Build 2 and now I have the problem that all the movies are out of sync. The audio comes about 5 minutes later than the video. I never had that problem with any other release before.

Can somebody tell me what I can do, that the audio and video is in sync again ???

chicagodog
2nd February 2002, 09:09
--------------------------------------------------------
- 01.02.2002 22:43:16
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.6 build 2
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 01.02.2002 22:43:19
- Free on drive E: 22917.25 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- H:\VIDEO_TS\VTS_10_1.vob
- H:\VIDEO_TS\VTS_10_2.vob
- H:\VIDEO_TS\VTS_10_3.vob
- H:\VIDEO_TS\VTS_10_4.vob
- H:\VIDEO_TS\VTS_10_5.vob
- H:\VIDEO_TS\VTS_10_6.vob

Ripping: H:\VIDEO_TS\VTS_10_1.vob
Ripping: H:\VIDEO_TS\VTS_10_2.vob
Ripping: H:\VIDEO_TS\VTS_10_3.vob
Ripping: H:\VIDEO_TS\VTS_10_4.vob
Ripping: H:\VIDEO_TS\VTS_10_5.vob
Ripping: H:\VIDEO_TS\VTS_10_6.vob
Ripping finished. Speed: 9750

--------------------------------------------------------
- 01.02.2002 22:52:45
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Programme\DVD2SVCD-1.0.6.2\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\DVD2AVI\DVD2AVI.exe" -IA=1 -CS=2 -YR=1 -EXIT -OF=[E:\dvdrip\DVD2AVI_Project_file] -IF=[E:\dvdrip\VTS_10_1.vob,E:\dvdrip\VTS_10_2.vob,E:\dvdrip\VTS_10_3.vob,E:\dvdrip\VTS_10_4.vob,E:\dvdrip\VTS_10_5.vob,E:\dvdrip\VTS_10_6.vob]
Framerate: 25000
DVD2AVI processing done.

--------------------------------------------------------
- 01.02.2002 23:02:35
- Free on drive E: 17546.25 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x81
Filename: E:\dvdrip\Extracted_audio_2.ac3
Found AC3 stream id: 0x80
Filename: E:\dvdrip\Extracted_audio_1.ac3
Audio1 delay: -57 ms
Audio2 delay: -64 ms
Audio extraction finished.

--------------------------------------------------------
- 01.02.2002 23:14:41
- Free on drive E: 16886.78 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: E:\dvdrip\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\BeSweet\BeSweet.exe" -core( -input "E:\dvdrip\Extracted_audio_1.ac3" -output "E:\DVDRIP\Encoded_audio_1.mp2" -logfile "E:\DVDRIP\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -C BSI -S BSI -c normal -s surround -f false -n false ) -ota( -g max -d -57 ) -ssrc( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of E:\dvdrip\Extracted_audio_1.ac3 finished.


Converting Audio to MP2. Filename: E:\dvdrip\Extracted_audio_2.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\BeSweet\BeSweet.exe" -core( -input "E:\dvdrip\Extracted_audio_2.ac3" -output "E:\DVDRIP\Encoded_audio_2.mp2" -logfile "E:\DVDRIP\Encoded_audio_2.log" ) -azid( -L -3db -l 0db -C BSI -S BSI -c normal -s surround -f false -n false ) -ota( -g max -d -64 ) -ssrc( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of E:\dvdrip\Extracted_audio_2.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 02.02.2002 00:05:16
- Free on drive E: 16579.11 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Programme\DVD2SVCD-1.0.6.2\ChangeCD-1.bmp
Finished converting pictures
--------------------------------------------------------
- 02.02.2002 00:05:22
- Free on drive E: 16578.30 mb
- Video Encoding
--------------------------------------------------------
Current CPU Usage: 7 %

Executing Cinema Craft Encoder.
StreamSectors: 1666479976
AudioSectors: 300158544
VideoPAPO: 21165048
ScanOffsetBytes: 231519
SeqAligningBytes: 14714319
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 300.00
PureMPEGStream: 1330210538.33
Seconds: 6169.84
CDSize: 800.00
Cut point 795.00
Variable Settings:
Frames: 154346
Anti Noise Filter: 2
Passes: 3
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 1724
Closing program
Video Encoding finished.

--------------------------------------------------------
- 02.02.2002 08:34:27
- Free on drive E: 15271.53 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\default.ini
--------------------------------------------------------
- 02.02.2002 08:34:30
- Free on drive E: 15271.53 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\default.ini

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\RunbbMPEG.exe" "E:\dvdrip\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 02.02.2002 08:34:35
- Free on drive E: 15271.48 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\RunbbMPEG.exe" "E:\dvdrip\bbMPEG_Muxed_File.mpg"
Length of E:\dvdrip\bbMPEG_Muxed_File00.mpg
3216 Seconds
Offset in Seconds: 3218
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\bbMPEG\RunbbMPEG.exe" "E:\dvdrip\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 02.02.2002 08:52:10
- Free on drive E: 13655.70 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: E:\dvdrip\bbMPEG_Muxed_File00.mpg
3218.521 seconds E:\dvdrip\bbMPEG_Muxed_File00.mpg
Analyzing: E:\dvdrip\bbMPEG_Muxed_File01.mpg
3501.819 seconds E:\dvdrip\bbMPEG_Muxed_File01.mpg
Analyzing finished.

--------------------------------------------------------
- 02.02.2002 08:55:09
- Free on drive E: 13655.70 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 6

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\VCDImager\VCDXBuild.exe" --cue-file="E:\dvdrip\CD_Image_File_CD1.cue" --bin-file="E:\dvdrip\CD_Image_File_CD1.bin" "E:\dvdrip\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 02.02.2002 08:58:14
- Free on drive E: 12849.92 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 6

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"C:\Programme\DVD2SVCD-1.0.6.2\VCDImager\VCDXBuild.exe" --cue-file="E:\dvdrip\CD_Image_File_CD2.cue" --bin-file="E:\dvdrip\CD_Image_File_CD2.bin" "E:\dvdrip\VCDXBuild_Script_2.xml"
CD-Image creation finished.

--------------------------------------------------------
- 02.02.2002 09:01:33
- Free on drive E: 12017.53 mb
- SVCD Creation finished!
--------------------------------------------------------

chainsaw135
2nd February 2002, 09:14
Are you using the besweet version 1.1 or 1.0? if your using 1.0 try and download the v1.1 on the front page of doom9 and unzip it in the folder v1.0 is in and copy over the files.

Then after that you can go over and re ripp the audio after the audio is done jump 2 the mux/cut step and see if that helps..if not come back and let us know.

jonnie
2nd February 2002, 12:38
I've got the same problem, could you explain how to rip just the audio, and how to I then jump the next step

dvd2svcd
2nd February 2002, 12:44
It has been fixed in the new Build 3. Read the readme file for an explanantion