View Full Version : Receiving "Encode failed" errors
tjbailey
25th March 2010, 00:58
For some reason all of a sudden, I am unable to rebuild ripped via AnyDVD movies so that they may be backed up on a 25g blank DVD.
I have looked through recent posts for similar problems and have tried some of the suggestions to no avail.
Here is the log from a failed attempt on Blind Side:
-----------------------
[17:48:44] BD Rebuilder v0.32.08 (beta)
- Source: THE_BLIND_SIDE
- Input BD size: 29.03 GB
- Approximate total content: [02:10:58.392]
- Target BD size: 22.66 GB
- Windows Version: 6.1 [7600]
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[17:48:47] PHASE ONE, Encoding
- [17:48:47] Extracting A/V streams [VID_00064]
- [17:48:56] Reencoding: VID_00064 (1 of 2)
- [17:48:56] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 3,485 frames
- [17:48:56] Reencoding: VID_00064, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- FFDSHOW Revision: (0)
[17:49:02] - Failed video encode, aborted
jdobbs
25th March 2010, 02:24
For some reason all of a sudden, I am unable to rebuild ripped via AnyDVD movies so that they may be backed up on a 25g blank DVD.
I have looked through recent posts for similar problems and have tried some of the suggestions to no avail.
Here is the log from a failed attempt on Blind Side:
-----------------------
[17:48:44] BD Rebuilder v0.32.08 (beta)
- Source: THE_BLIND_SIDE
- Input BD size: 29.03 GB
- Approximate total content: [02:10:58.392]
- Target BD size: 22.66 GB
- Windows Version: 6.1 [7600]
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[17:48:47] PHASE ONE, Encoding
- [17:48:47] Extracting A/V streams [VID_00064]
- [17:48:56] Reencoding: VID_00064 (1 of 2)
- [17:48:56] Collecting video information
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 3,485 frames
- [17:48:56] Reencoding: VID_00064, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- FFDSHOW Revision: (0)
[17:49:02] - Failed video encode, aborted Your FFDSHOW version is obviously wrong... in fact it looks like it may not even be installed (although BD-RB should find that as an error when it opens). At the very least it has been corrupted. Install the software (and versions) listed in the first post of the bug thread.
tjbailey
28th March 2010, 22:37
I reinstalled FFDSHOW and made some of the other changes requested in the log and had success in rebuilding Grease and Men Who Stare but now I am hung up on New Moon with a failed encode. The only thing it mentions this time is FFDSHOW Revision: (3326) at the end.
Any ideas??
-----------------------
[13:45:00] BD Rebuilder v0.32.08 (beta)
- Source: NEW_MOON
- Input BD size: 42.20 GB
- Approximate total content: [03:37:25.382]
- Target BD size: 22.66 GB
- Windows Version: 6.1 [7600]
- Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[13:45:04] PHASE ONE, Encoding
- [13:45:04] Extracting A/V streams [VID_00552]
- [13:45:05] Reencoding: VID_00552 (1 of 16)
- [13:45:05] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23.976fps, 144 frames
- [13:45:05] Reencoding: VID_00552, Pass 1 of 1
- [13:45:12] Video Encode complete
- [13:45:12] Reencoding audio tracks (if req'd)
- [13:45:13] Multiplexing M2TS
- [13:45:13] Extracting A/V streams [VID_00555]
- [13:45:17] Reencoding: VID_00555 (2 of 16)
- [13:45:17] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 2,786 frames
- [13:45:17] Reencoding: VID_00555, Pass 1 of 1
- [13:45:55] Video Encode complete
- [13:45:55] Reencoding audio tracks (if req'd)
- [13:45:56] Multiplexing M2TS
- [13:45:58] Extracting A/V streams [VID_00553]
- [13:46:06] Reencoding: VID_00553 (3 of 16)
- [13:46:06] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 6,834 frames
- [13:46:06] Reencoding: VID_00553, Pass 1 of 1
- [13:47:33] Video Encode complete
- [13:47:33] Reencoding audio tracks (if req'd)
- [13:47:36] Multiplexing M2TS
- [13:47:39] Extracting A/V streams [VID_00556]
- [13:47:49] Reencoding: VID_00556 (4 of 16)
- [13:47:49] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 6,654 frames
- [13:47:49] Reencoding: VID_00556, Pass 1 of 1
- [13:49:38] Video Encode complete
- [13:49:38] Reencoding audio tracks (if req'd)
- [13:49:41] Multiplexing M2TS
- [13:49:45] Extracting A/V streams [VID_00554]
- [13:49:55] Reencoding: VID_00554 (5 of 16)
- [13:49:55] Collecting video information
- Source Video: MPEG-2, 720x480
- Rate/Length: 29.970fps, 6,804 frames
- [13:49:56] Reencoding: VID_00554, Pass 1 of 1
- [13:51:23] Video Encode complete
- [13:51:23] Reencoding audio tracks (if req'd)
- [13:51:26] Multiplexing M2TS
- [13:51:29] Extracting A/V streams [VID_00042]
- [13:51:39] Reencoding: VID_00042 (6 of 16)
- [13:51:39] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 23.976fps, 1,370 frames
- [13:51:40] Reencoding: VID_00042, Pass 1 of 1
- Encode failed. Retrying.
- Encode failed. Retrying.
- Reached retry limit. Aborting.
- FFDSHOW Revision: (3326)
[13:51:42] - Failed video encode, aborted
vBulletin® v3.8.5, Copyright ©2000-2012, Jelsoft Enterprises Ltd.