DVD plays not well [Archive]

peterpan23

9th February 2009, 19:29

hello i have rebuilded papillon with the hc encoder and dvd-rb pro
this gave me no problems ,plays well

no i did black hawk down and snatch with the same settings
and these 2 gave me problems while playing in my dvd player

i have selected a custom matrix and multiple encoder processes
in the avs filter editor i see 2 filters undot and deen

someone have an idea what this could be

i use verbatim dvd+R

greetings

blutach

10th February 2009, 12:06

You'll need to post your DVDRB log.

Thread transferred to DVDRB forum.

Regards

peterpan23

10th February 2009, 17:01

here is the log

-----------------
[16:58:00] Phase I, PREPARATION started.
- DVD-RB v1.28.2
- AVISYNTH 2.5.8.0
- HC v0.23.0.0 encoder selected
- AVS Filters are enabled.
- Source: BLACK HAWK DOWN
- VTS_01: 3.212.242 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 207.640 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 67,1%
- Overall Bitrate : 3.918Kbs
- Space for Video : 3.972.410KB
- HIGH/LOW/TYPICAL Bitrates: 4.450/2.476/3.918 Kbs
[17:00:28] Phase I, PREPARATION completed in 2 minutes.

you also want to see the hc ini file?

jdobbs

10th February 2009, 18:55

peterpan23

10th February 2009, 19:50

oh you want to see the finished log
i thougt only the prepare

peterpan23

11th February 2009, 19:09

[17:52:10] One Click encoding activated...
-----------------
[17:52:10] Phase I, PREPARATION started.
- DVD-RB v1.28.2
- AVISYNTH 2.5.6.0
- HC v0.23.0.0 encoder selected
- AVS Filters are enabled.
- Source: BLACK HAWK DOWN
- VTS_01: 3.212.242 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 207.640 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 67,1%
- Overall Bitrate : 3.918Kbs
- Space for Video : 3.972.410KB
- HIGH/LOW/TYPICAL Bitrates: 4.450/2.476/3.918 Kbs
[17:54:34] Phase I, PREPARATION completed in 2 minutes.
[17:54:34] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
[18:50:19] Phase II ENCODING completed in 56 minutes.
[18:50:19] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[19:00:28] Phase III, REBUILD completed in 10 minutes.

Done.
[19:00:28] PREPARE/ENCODE/REBUILD completed in 68 min.

now i notice something else

i have adjust my hc ini file with hcgui0,23
saved it in the hc enc folder in rebuilder
but when dvd-rb gets to work i see in the encoder settings in hc enc other settings dan i created with hcgui
how can i solve this? maybe somewhere add a line?

greetings

jdobbs

11th February 2009, 19:36

DVD RB passes settings to HC -- because they are required in order to make the encode work correctly. They are based on the source and the quality needed. If I provided a way to get around it I'd have 1000 bug reports from "well intentioned self inflicted wounds".

I see your log -- and it looks fine. But I still have no idea what problem you are having? All I have to work with is "these 2 gave me problems while playing in my dvd player". Are they skipping, dieing, locking up, playing bad, showing problems with chapters, menu issues, visual issues? Do you do any preprocessing with other software or make "adjustments" before encoding? I ask because it appears you are at least trying to do so with HC settings. Is there a need to use the filters you added in the filter editor?

peterpan23

11th February 2009, 20:04

the problem is that black hawk down and snatch is skipping many times 2/3 seconds in my dvd player
while papillon played great
and i use no other programs than clonedvd2 and anydvd
i burn my movies on verbatim+R with imgburn speed 4x and verify

so hc does find the best settings automatically?
but why he doesn't load my inifile?

greetings

jdobbs

11th February 2009, 20:52

HC doesn't find the best settings, DVD-RB does. It puts them into an INI file that is used during encoding. That skipping sure sounds like a disc problem, but Verbatim DVD+Rs burned at 4X are usually pretty reliable. That's what I use too.

peterpan23

11th February 2009, 20:58

ok then i'l try it again
(maybe with my other burner) i burned around 350 dvd with the first one and the second maybe 20 maybe this is the problem then or just a few bad dvd's
but overall i have never problems with verbatim

thanks for your answers

greetz