Help Need With Hellsing Ultimate Vol.3

[Master Yoda]

Just got hellsing ultimate volume vol.3 limited edition and seen as the two discs are dvd5's and because geneon usa are exiting the anime market i want to make backups so not to damage the originals.

Heres the problem when ripping i get a error saying "on-the-fly ifo/bup file patching failed then the file name then reason:invalid ifo/bup"

The discs have no marks on them what so ever but i did look on the disc and theres 3 hidden files...

autorun.inf
RGASDEV.SYS
ZJHXR8CI.EXE

when searching goolge i found a this link
http://forum.doom9.org/showthread.php?p=1033830

Is this error im getting caused by these files and if so how do i make a backup ?? ripit4me ?? use file mode instead of iso mode??

[setarip_old]

Hi!

One method is to use RipIt4Me SPECIFICALLY as follows:

1) First start RipIt4Me

2) Select either "Wizard" mode or "One-click" mode

3) Then load the DVD

[Master Yoda]

So i'm not actually using ripit4me to do the ripping ? so once i've loaded the dvd i just rip as normal ? if so would it be better to use file mode so that the backup doesn't have those 3 files on ??

[setarip_old]

So i'm not actually using ripit4me to do the ripping ?Yes, you will.

Perhaps I should have added a #4 - Then continue with RipIt4Me, as usual...

(Those files are not in the "VIDEO_TS" folder and won't be copied)

[Master Yoda]

Just gave it a try and i still get that error message on VTS_05_0.BUP and VTS_06_1.VOB.

Ripit4me gave a message saying that autorun would be stopped, but once the disc was in i had to switch drives in ripit4me, does it have to be set to the drive the disc is going in before the disc is loaded?

Heres part of decrypters log...

I 20:14:37 Decrypting VTS_05_2.VOB... (LBA: 539064 - 776293) - KEY: C4 5B A7 E4 C3
W 20:16:57 Sector 776284 - Pack Header Not Found (0x44564456)
W 20:16:57 Sector 776285 - Pack Header Not Found (0x00010000)
W 20:16:57 Sector 776286 - Pack Header Not Found (0x00010000)
W 20:16:57 Sector 776287 - Pack Header Not Found (0x00010000)
W 20:16:57 Sector 776288 - Pack Header Not Found (0x00010000)
W 20:16:57 Sector 776289 - Pack Header Not Found (0x00033775)
W 20:16:57 Sector 776290 - Pack Header Not Found (0x0006AB41)
W 20:16:57 Sector 776291 - Pack Header Not Found (0x000A1475)
W 20:16:57 Sector 776292 - Pack Header Not Found (0x00010000)
W 20:16:57 Sector 776293 - Pack Header Not Found (0x00000007)
I 20:16:57 Copying VTS_05_0.BUP... (LBA: 776294 - 776312) - KEY: N/A
W 20:16:57 On-the-fly IFO/BUP file patching failed!
W 20:16:57 File Name: VTS_05_0.BUP
W 20:16:57 Size: 38,912 bytes
W 20:16:57 Reason: Invalid IFO / BUP file.
I 20:17:08 Copying VTS_06_0.IFO... (LBA: 776313 - 776321) - KEY: N/A
W 20:17:08 On-the-fly IFO/BUP file patching failed!
W 20:17:08 File Name: VTS_06_0.IFO
W 20:17:08 Size: 18,432 bytes
W 20:17:08 Reason: Invalid IFO / BUP file.
I 20:17:10 Decrypting VTS_06_0.VOB... (LBA: 776322 - 776378) - KEY: D7 F8 4A 58 40
I 20:17:10 Decrypting VTS_06_1.VOB... (LBA: 776379 - 878448) - KEY: D7 F8 4A 58 40
W 20:17:10 Sector 776379 - Pack Header Not Found (0x0006B1B7)
W 20:17:10 Sector 776380 - Pack Header Not Found (0x000868A7)
W 20:17:10 Sector 776381 - Pack Header Not Found (0x000A1B4A)
W 20:17:10 Sector 776382 - Pack Header Not Found (0x000B9E4A)
W 20:17:10 Sector 776383 - Pack Header Not Found (0x44564456)
W 20:17:10 Sector 776384 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776385 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776386 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776387 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776388 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776389 - Pack Header Not Found (0x00000007)
W 20:17:10 Sector 776390 - Pack Header Not Found (0x00010000)
W 20:17:10 Sector 776391 - Pack Header Not Found (0x0000064F)

[setarip_old]

does it have to be set to the drive the disc is going in before the disc is loaded?Yes

Apparently you haven't gotten the gist of my directions - RipIt4Me has to be ENTIRELY set up (ready to "rip" from an already specified drive and to an already specified hard drive location) BEFORE you put the DVD in the drive...

[Master Yoda]

OK, just tried again and had the drive and hdd set so once the disc was in all i had to do was click next, then create psl etc.... and still i get the same error.

Altough the said files are in the ripped directory.

Its version 1.7.1.0 of ripit4me.

ripit4me log

I 20:47:22: RipIt4Me Version 1.7.1.0
I 20:47:22: Starting Wizard at 20:47:22
I 20:47:22: Running Windows XP Service Pack 2
I 20:47:22: DVD Decrypter version: 3.5.4.0
I 20:47:22: DVD Shrink version 3.2.0.15
I 20:47:22: _________________________
I 20:47:22: SPTI layer available
I 20:47:22: _________________________
I 20:47:22: Ripping mode: Full Rip
I 20:47:22: Main title(s):
I 20:47:22: Title 8 (VTS 8 PGCs 1) -- 0:42:06s -- 16:9
I 20:47:22: Remove Protected Cells = On
I 20:47:22: Remove Tiny Cells = On
I 20:47:22: Remove Useless Menu Cells = On
I 20:47:22: Bypass Annoying PGCs = Off
I 20:47:22: Remove Last VTS = On
I 20:47:22: Blank Bogus VTS = On
I 20:47:22: Cleanup VOBs on Full DVD = On
I 20:47:22: Rip JACKET_P folder = On
I 20:47:22: Copy IFO mode = 2
I 20:47:22: DVD Decrypter IFO parsing mode = 1
I 20:47:22: VOB Scan: Scan cells lasting less than: 300
I 20:47:22: BOV VOBU Stride = 30
I 20:47:22:
I 20:47:22: Copying original IFOs into target directory
I 20:47:22:
I 20:47:22: Wizard Step 2: PSL file creation
I 20:47:23: DVD Volume Label: HELLSING_ULTIMATE_LE_EXTRAS_03
I 20:47:23: Loading IFOs
I 20:47:23: Region code: 1
I 20:47:23: Video Format: NTSC
I 20:47:23: Done opening IFOs
I 20:47:23: Retrieving sectors from DVD drive
I 20:47:24: CRC32 value = 0x94C19DDC
I 20:47:24: Creating Protected Sector List (PSL) file
I 20:47:24: Done creating PSL file
I 20:47:24:
I 20:47:24: Wizard Step 3: Ripping DVD
I 20:47:25: Starting DVD Decrypter
I 20:47:25: Found no unreferenced titleset.
I 20:47:25: Waiting for Decrypter to be ready
I 20:47:33: Done importing the PSL file, now starting ripping...
I 20:56:25: Done ripping ...
I 20:56:25: Decrypter ripping time: 00:09:00
I 20:56:25: _________________________
I 20:56:25: The rip seems to have been aborted, RipIt4Me cannot continue

[setarip_old]

It appears that, for some reason, you chose to abort after an apparently successful Step #3 (Ripping by DVD Decrypter).

You should have next clicked on "Yes" to perform Step #3B - and then click on "Yes" to use "FixVTS" (If you're using aversion of RipIt4Me earlier than v.1.7...)

[Master Yoda]

The reason i aborted was because decrypter gave me that on-the-fly ifo/bup file patching failed message. Decrypter had not finished when i aborted.

[setarip_old]

As an experiment, turn off your computer completely (power down) and then do a coldboot - and then perform all of the steps I previously stated (in the specific order)...

[Master Yoda]

OK, just shutdown and restarted fresh and the rip went sweet as a nut, something else i noticed before rebooting the ripping speed wouldn't go much past 2x after rebooting it zipped through getting upto about 14x.

After running step 3b and 4 the video_ts.vob and all vts_0*_0.vobs except 2 have been removed, i'm guessing they was not needed.

So thats the extras disc done, just got to do the main disc now.

Thanks for the help.

[setarip_old]

Thanks for the help.As always, my pleasure ;>}

I'd suggest that you once again shutdown and do a coldboot before trying to use the same set of procedures rip the "main disc"...